Item description.pdf

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS AIR FORCE SUSTAINMENT

CENTER (AFMC) TINKER AIR FORCE BASE

OKLAHOMA

ACCO Monorail Hoist

The 76th MXSG is requesting ACCO Monorail Hoist. This requirement must have the following specifications:

• One (1) Each 2-Ton Rated ACCO Wright Speedway Wire Rope Hoist, Model

X1W02D025-15M2D1, to include:

o Monorail Hoist, Close Headroom, Cross Mounted o Operating flange 3.33 inch louden patented track o 25 feet lift height o 15 FPM hoist lift speed VFD o 22 3/8 inch headroom includes 2” for geared limit switch (from rail trade line to saddle of hook at high) o 2 part double reeving o Trolley Speed – 50 FPM max VFD o Enclosure – NEMA 3R o Hoist Motor – 2 HP, 1800 RPM Inverter Duty o Trolley Motor – 1 ea ½ HP, 1800 RPM Inverter Duty o Voltage 460V 3Phase 60Hz o Motor Thermostats o Motor Brake o Geared Limit witch o Hoist H4 Duty class o Mechanical Load Brake o Overload Cut-off device o Thermal Overload protection o Safety Yellow Enamel painted hoist/trolley o Hoist/Trolley Max. weight 900 lbs o HBC-Radiomatic Micron 7 radio remote control with:

2-motion Start button Hoist UP – Hoist Down Trolley North – Trolley South Red E-Stop button Operator controlled warning horn Operating and battery status display

Spare transmitter Radio control with rechargeable batteries and chargers Visual warning light activated with crane movement (flashing strobe light).

• Two (2ea) Louden Supertrack Girder, ACCO part number 604.1231 with the following specifications:

o 47ft-0 inch long o depth 12” o 31 lb/feet o bottom flange width 3.33” o Splice preparation, gray primer paint o No hole on top flange

• Two (2ea) End Stop Assembly, angle type, ACCO Part Number 607.5030, to include:

o Mounting hardware

• One (1ea) Web Splice plate assembly, ACCO Part Number 607.5011 to include:

o Mounting hardware o Gray primer paint