Technical Data Plan (TDP).pdf
PDF 82 KB Posted
- Attached to
- WINDSHIELD WIPER ASSEMBLY
- Solicitation number
- W912CH26Q0005
- Issued by
-
Department of the Army
About this file
This is an engineering drawing for a Wiper Assembly (VMMD) produced by the U.S. Army Tank Automotive and Armaments Command located in Warren, Michigan. The drawing specifies the assembly, installation, and quality inspection procedures for a wiper assembly component (Part Number 12651243, CAGE Code 19207) designed for military vehicle application, specifically the M1231.
The assembly consists of three components: an Adaptor Assembly for Wiper Shaft (Part 12680631), a 12-inch Polycarbonate Wiper (Part 31012B), and a Corrosion-Resistant Steel Wiper Arm (Part 33012A). The assembly instructions require the wiper blade to be attached to the wiper arm, the drum adapter to be installed into the wiper arm with a properly oriented offset hole, and the complete wiper assembly to be mounted onto the wiper motor shaft. Quality assurance inspection must comply with MIL-STD-1916 at Verification Level II. The drawing is maintained in CAD format and references applicable standards ASME Y14.100-2017 and ASME Y14.5-2018. This document is classified as Distribution Statement C, restricted to the Department of Defense and their contractors only, due to critical technology designation as of October 19, 2011, with export restrictions under the Arms Export Control Act.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W912CH26Q0005-0001.pdf | ||
| W912CH26Q0005.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A A
BB
D
C
B
A
7DRAWING SIZE D
FORMAT: D_FMTV_ENG_1_6
D
C
B
A
6 5 4 3 2 18
7 6 5 4 3 2 18
APPLICATION
USED ONNEXT ASSY
M1231
PART NO. 12651243
1. APPLICABLE STANDARDS/SPECIFICATIONS:
A. ASME Y14.100-2017
B. ASME Y14.5-2018
2. ASSEMBLE WIPER BLADE TO WIPER ARM.
3. INSTALL DRUM ADAPTER INTO WIPER ARM AND TIGHTEN SET SCREW.
OFFSET HOLE SHALL BE ORIENTED TOWARDS THE WIPER ARM.
4. INSTALL WIPER ASSEMBLY ONTO WIPER MOTOR SHAFT AND TIGHTEN
SET SCREW.
5. WIPER NOZZLE AND WIPER MOTOR SHAFT ARE SHOWN FOR
REFERENCE. INSTALL ITEMS IAW VEHICLE TM.
6. QUALITY ASSURANCE: INSPECT IAW MIL-STD-1916 INSPECTION SHALL
BE TO VERIFICATION LEVEL II UNLESS SPECIFIED OTHERWISE.
NOTES:
DISTRIBUTION STATEMENT C:
DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE
AND THEIR CONTRACTORS ONLY. REASON: CRITICAL
TECHNOLOGY DATE OF DETERMINATION: 2011-10-19. OTHER
REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO
U.S. ARMY TANK AUTOMOTIVE AND ARMAMENTS COMMAND.
PDM MVPS , ATTN: SFAE-CSS-TS-MR, WARREN, MICHIGAN 48397-5000.
THIS DRAWING WAS GENERATED FROM A SOLID MODEL
AND IS CAD MAINTAINED. CHANGES SHALL BE
INCORPORATED BY THE DESIGN ACTIVITY.
CONTRACT NUMBER
CONTRACTOR
DRAWN BY DATE (YR-MO-DA)
D. MIERAS 2019-04-17
CHECKER ENGINEER
D. BRISH D. BRISH
ENGINEER QUALITY ENGINEER
D. MIERAS
DRAWING APPROVAL
MIKE CHEFF
DESIGN APPROVAL
BRIAN WILSON
PMIC A
MECHANICAL
PROPERTIES
YP
TS
EL2
RA
BH
RH
DO NOT SCALE DRAWING
ALL SHEETS ARE SAME REVISION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCES ON ANGLES 2
0 PLACE DECIMALS
1 PLACE DECIMALS
2 PLACE DECIMALS .03
3 PLACE DECIMALS
THIRD ANGLE PROJECTION
MATL ENGR MODELED BY
D. MIERAS 1 OF 1REF kg 0.0 0.750
SHEETUNIT WT.SCALE
1265124319207D
DWG NOCAGE CODESIZE
WIPER ASSY, VMMD
US ARMY
TANK AUTOMOTIVE & ARMAMENTS COMMAND
WARREN, MICHIGAN 48397-5000
DESIGN ACTIVITY
EXPORT CONTROL WARNING: WARNING - THIS DOCUMENT CONTAINS
TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT
CONTROL ACT (TITLE 22, U.S.C., SEC 2751,ET. SEQ.) OR THE
EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50,
U.S.C., APP. 2401, ET. SEQ. VIOLATIONS OF THESE EXPORT LAWS
ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.
REVISIONS
REVISION ZONE DESCRIPTION DATE(YR-MO-DA) APPROVED
- - INITIAL RELEASE ERR TAC-W9117 2019-05-20 D. MIERAS
BILL OF MATERIALS
INDEX CAGE CODE PART NUMBER NOMENCLATURE SPEC NO. QTY
1 19207 12680631 ADAPTOR ASSY, WIPER SHAFT 1
2 1
8ALM2 31012B WIPER, POLYCARBONATE, 12 INCH
18ALM2 33012A ARM, WIPER, CRES
2 3
B
SECTION A-A
SECTION B-B
A
SCALE 4.000
DETAIL A
SCALE 2.500
DETAIL B
REF
A - CREATED ADAPTOR SUB ASSEMBLY ERR TAC-X2464 2020-10-20 D.. MIERAS
| Sheet 1 |
| Views |
| new_view_1 |
| top_2 |
| A |
| B |
File details come from the government source that posted it. Updated .