Technical CLIN 0001.pdf
PDF 286 KB Posted
- Attached to
- Lathe Engine TRD
- Solicitation number
- 47QSCA26RFI0004
- Issued by
- Not on record
About this file
This document is a technical specifications sheet for a toolroom engine lathe (Part #3416-211-1018) required by the U.S. Air Force. The lathe must be floor-mounted with the following core specifications: 220V, 3-phase, 60Hz power; spindle speed range of 125 to 3000 RPM; center-to-center distance of 18 inches; spindle hole diameter of 1.25 inches; and thread quantity range of 11 to 108 per inch. The equipment has overall dimensions of 71.5 inches length by 31 inches width by 72.75 inches height, weighing 2250 pounds. The lathe must be hand and power operated with a geared head and specified swing dimensions over the bed (11 inches), carriage (9 inches), and cross (6 inches).
Contractors must provide two hard copies and one electronic copy of technical data with the machine, shipped to Robins Air Force Base, Georgia (235 Byron Street, Building 300, Suite 19A, Robins AFB, GA 31098-1813). The USAF requires contractors to specify facility power availability, doorway dimensions for equipment delivery, available floor space including operator workspace and OSHA-required service panel access clearances, and any known equipment sources. The USAF explicitly does not include installation, training, tooling, or additional options beyond the standard equipment package in the stated characteristics.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFI IPE.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Part #3416-211-1018 tem Noun: Lathe, Engine Specifications/Technical
Characteristics:
• Toolroom lathe, floor mounted
• Power: 220 V, 3 phase, 60Hz
• Hand and power operated
• Geared Head
• Center to Center: 18 in
• Spindle Speed: 125 to 3000 RPM
• Spindle hole diameter: 1.25 in
• Swing over bed: 11 in
• Swing over carriage: 9 in
• Swing over cross: 6 in
• Thread quantity range: 11 to 108 per inch
• Dimensions o Length: 71.5 in o Width: 31 in o Height: 72.75 in o Weight 2250 lb
• Additional features or tooling: _______________________
• Two (2) hard copies and one (1) electronic copy of technical data shall be provided with the machine.
• Shipping address for electronic technical data packages is:
235 Byron Street, (Bldg. 300) Suite 19A Robins AFB, GA 31098-1813
If not specified within the characteristics of the NSN, please provide the following information:
• The existing source power available at the facility is o Volt: __ ______ o Phase: ______ __ o Frequency: _________ Hertz (Hz)
• The machine must fit through a doorway with the following dimensions:
o Width: __ o ___
Height:____
120/208/220/480V 1/2/3 Phase
• Available floor space for equipment width by length to include required operator workspace and OSHA required access clearances to service panels.
o Width: _________ o Length: _________
• If available, a known source for the equipment is __________________________
The USAF does not include installation, training, tooling or any additional options that are not part of the standard package in the above characteristics data.
File details come from the government source that posted it. Updated .