Tech Data - PGC00014 - Crown- Service Cover Green - MC.pdf

CROWN, SERVICE, CAP, TYPE III GREEN 2212.

ADDITIONAL INFORMATION FOR MIL-DTL-18186E.

PATTERN DATE: 17 OCT 2016. SAMPLE OF CLOTH, TYPE II AND TYPE III GABARDINE, GREEN

SHADE 2212, 10.6 OZ, IS ROLL NO. 14-086883 FOR SHADE, FINISH AND COLORFASTNESS.

INTERIM SPECIFICATION CHANGES TO MIL-DTL-18186E.

Page 1, Paragraph 1.2.1, line 2, Delete Type II – Wool Serge, Green

Page 7, Paragraph 3.4, line 4 after #center of crown# add the following #The buttonhole type shall be horizontal, straight type# .

Page 7, Paragraph 3.4, add the following to the end of the paragraph: #The combination identification- size label shall be positioned 1 1 +/- 1 inches to the right or left of center back seam with the top edge of the label lapped approximately 3/16 inch on underside or headband. #

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR

PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED

SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL

TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO

EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR-CODING

ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT

UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL

"UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A

MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON

THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL

CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT

CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE

LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII

(TAG, PAPER) OF MIL-DTL-32075.

INCLUDE T1721 OBJECT TEXT ID ST

MIL-DTL-32072 NOT 1 Thread, Polyester dated 02-Mar-2017 has been canceled and is superseded by A-A-59963 Thread, Polyester dated 26-Feb-2016.

ADDITIONAL INFORMATION FOR A-A-50196:

(NO CURRENT CHANGES TO A-A-50196B)

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12, 1981, INCLUDING INTERIM FEDERAL

SPECIFICATION PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY CANCELLED, AND REPLACED

WITH ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING

FIBERBOARD SHIPPING CONTAINERS.

ADDITIONAL INFORMATION FOR PPP-B-676:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR PPP-T-45:

PPP-T-45 IS CANCELLED AND SUPERSEDED BY A-A-1671: TAPE, GUMMED

(PAPER, REINFORCED, LAMINATED)

NOTE: A-A-1671 IS WRITTEN TO BE APPLIED TO PPP-T-45'S REQUIREMENTS OF TYPE III,

CLASS B.

(ref. T0592 - 9/11/06)

MIL-DTL-368K Cloth, Satin, Rayon and Cloth, Twill, Rayon dated 19 NOV 2019

No information follows

MIL-DTL-823M Cloth, Serge, Wool, Wool and Nylon, Polyester and Wool dated 02 SEP

Additional information for MIL-DTL-823M

Standard sample for Air Force Blue shade 1620

Is available and identified as PIECE NO. 11-01 for shade only

(T0915)

ADDITIONAL INFORMATION FOR MIL-F-20268:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1208)

MIL-DTL-10176L Cloth, Gabardine: Wool, Polyester and Wool dated 30-Mar-2018

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER ALCOHOL WETTING AGENT SHALL BE USED TO

INSURE SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT FINISH (when specified) IS

NOT RELEASED.

THE WATER REPELLANT TREATMENT (When Specified) SHALL BE APPLIED BEFORE THE

SPONGING OPERATION.

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE CLOTH SHALL BE PIECE DYED.

MIL-DTL-41820E Cloth, Gabardine, Polyester and Rayon dated 18 SEP 2019

No information follows

LIST OF APPROVED WATER REPELLENT TREATMENTS FOR MILITARY FABRICS 1/

THE FOLLOWING ARE APPROVED FLUOROCARBON EXTENDER COMPONENTS WHICH MAY BE COMBINED

WITH AN APPROVED FLUOROCARBON WATER REPELLENT TO PRODUCE A "QUARPEL" TYPE WATER

REPELLENT TREATMENT:

TRADE NAME SUPPLIER

AEROTEX 96 AMERICAN CYANAMID CO, PO

AEROTEX 96-B PO BOX 32787

CHARLOTTE, NC

ARIDRY C C.N.C. INTERNATIONAL

ARIDRY Q PO BOX 3000

WOONSOCKET, RI 02895

AURAPEL EM AURALUX CORP. PO BOX 113

AURAPEL SP YANTIC, CT. 06389

AURAPEL W-68

AURAPEL 328

AURAPEL 330-R

AURAPEL 391

AURAPEL 396

AURAPEL NSE

CHEMAPEL 102 CHEMATRON, INC. PO BOX

668732, CHARLOTTE, NC

28266

THE FOLLOWING ARE APPROVED FLUOROCARBON EXTENDER COMPONENTS FOR "QUARPEL" TYPE

WATER REPELLENT TREATMENTS.":

TRADE NAME SUPPLIER

CHEMPEL WA CHEM-TEX INC.

P.O. BOX 1105, 1891 N.

COLUMBIA ST., BLDG. 106

MILLEDGEVILLE, GA. 31061

NALAN W E. I. DUPONT DE NEMOURS & CO.

WILMINGTON, DE 19898

NEPTON FC PAT-CHEM, INC.

NEPTON EXT PO BOX 1926

GREENVILLE, SC 29602

NORANE 18 SEQUA CHEMICAL CORP.

NORANE F ONE SEQUA DRIVE

NORANE 100 CHESTER, SC 29706-0070

PHOBOTEX FTC/NEW CIBA-GEIGY CORPORATION

PHOBOTEX WR PO BOX 11422

GREENSBORO, NC 27409

SYNTHOPEL QP SYNTHRON, INC.

PO BOX 1111

MORGANTON, NC 28655

MARKPEL K-154 IVAX INDUSTRIES, 2 PARKWAY,

UPPER SADDLE RIVER, NJ 07458

TANAPEL 54 SYBRON CHEMICALS INC.

465 BOULEVARD

ELMWOOD PARK, NJ 07407

UNIPEL 101-N UNICHEM, INC.

P.O. BOX 612

916 W. MAIN ST.

HAW RIVER, NC 27258

1/ A SEPARATE LIST OF APPROVED WATER REPELLENT TREATMENTS EXISTS FOR FABRICS

CONFORMING TO CLOTH, CAMOUFLAGE PATTERN; WOODLAND, COTTON AND NYLON, CLASS 2, MIL-

C-44031 AND CLOTH, TWILL, CAMOUFLAGE PATTERN, COTTON AND NYLON FOR DESERT UNIFORM, CLASS 1A, MIL-C-44034.

(ref. T0164 - May 18, 2006)

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN

CANCELLED AND REPLACED BY ASTM-D-6193, 4/98

STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE

TO FED-STD-751.

(ref. T0216 - May 18, 2006)

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD

INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for

Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA

19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution

Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING

FOR SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL)

SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T

ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT

MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE

PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH

SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON

THE CONTAINER.

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

ADDITIONAL INFORMATION FOR MIL-STD-1394:

PAGE 10, PARAGRAPH XI, ADD THE FOLLOWING:

D. LABEL/TAG

. 1. BAR-CODE OMITTED OR NOT READABLE

. BY SCANNER HUMAN-READABLE 1 POINT

. 2. INTERPRETATION (HRI) OMITTED

. OR ILLEGIBLE 1 POINT

. 3. NOT VISIBLE ON FOLDED

. ON FOLDED PACKAGED END ITEM 1 POINT

. 4. CAUSES DAMAGE TO THE

. END ITEM 3 POINT

MIL-STD-1394B PAGES 2 & 3 TABLE I, DELETE IN ITS

ENTIRETY AND SUBSTITUTE "TABLE I SAMPLING

PROVISIONS FOR END ITEM VISUAL EXAMINATION".

NORMAL INSPECTION

LOT SZ SAMP SZ MAX ACCP MAX ACCP PT VALU

. NO. FOR

. SELECTED 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS DEFECTS

. (SEE 1.2)

UP THRU 90 20 1/

91-150 32 2 3

151-280 503 5

281-500 80 5 9

501-12001 125 8 12

1201-3200 200 11 17

3201-10,000 315 16 25

10,001-35000 500 21 31

35,000&OVER 800 32 50

TIGHTEN INSPECTION

UP THRU 90 20 1/

91-15- 32 1/

151-280 50 2 3

281-500 80 3 5

501-1200 125 5 10

1201-3200 200 8 14

3201-10,000 315 12 20

10,001-35,000 500 21 31

35,000 & OVER 800 32 50

REDUCED INSPECTION

UP THRU 90 8 1/

91-150 13 1/

151-280 20 2-3 5

281-500 32 3-5 6

501-1200 50 3-6 9

1201-3200 80 5-7 11

3201-10,000 125 8-11 15

10,000-35,000 200 11-14 19

35,001 & OVER 315 16-18 28

1/ FOR THIS INSPECTION USE FIRST SAMPLING PLAN

BELOW. IF SAMPLING SIZE EQUALS OR EXCEEDS LOT OR

BATCH SIZE, DO 100 PERCENT INSPECTION.

2/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND

VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT

REINSTATE NORMAL INSPECTION (SEE 5.7.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT

VALUE.

MIL-STD-1394B PAGES 2 & 3 TABLE I, DELETE IN ITS

ENTIRETY AND SUBSTITUTE "TABLE I SAMPLING

PROVISIONS FOR END ITEM VISUAL EXAMINATION".

NORMAL INSPECTION

LOT SZ SAMP SZ MAX ACCP MAX ACCP PT VALU

. NO. FOR

. SELECTED 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS DEFECTS

. (SEE 1.2)

UP THRU 90 20 1/

91-150 32 2 3

151-280 503 5

281-500 80 5 9

501-12001 125 8 12

1201-3200 200 11 17

3201-10,000 315 16 25

10,001-35000 500 21 31

35,000&OVER 800 32 50

TIGHTEN INSPECTION

UP THRU 90 20 1/

91-15- 32 1/

151-280 50 2 3

281-500 80 3 5

501-1200 125 5 10

1201-3200 200 8 14

3201-10,000 315 12 20

10,001-35,000 500 21 31

35,000 & OVER 800 32 50

REDUCED INSPECTION

UP THRU 90 8 1/

91-150 13 1/

151-280 20 2-3 5

281-500 32 3-5 6

501-1200 50 3-6 9

1201-3200 80 5-7 11

3201-10,000 125 8-11 15

10,000-35,000 200 11-14 19

35,001 & OVER 315 16-18 28

1/ FOR THIS INSPECTION USE FIRST SAMPLING PLAN

BELOW. IF SAMPLING SIZE EQUALS OR EXCEEDS LOT OR

BATCH SIZE, DO 100 PERCENT INSPECTION.

2/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND

VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT

REINSTATE NORMAL INSPECTION (SEE 5.7.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT

VALUE.

(Ref. T0336)