TE 20 Marathon Operation Service and Installation Manual.pdf
PDF 10 MB Posted
- Attached to
- Solid Waste Management - Refuse Collection Federal contract opportunity
- Solicitation number
- W911SG-22-R-0018
About this file
This document provides details on a federal contract solicitation for solid waste management services at Fort Bliss, Texas. The Mission and Installation Contracting Command at Fort Bliss is seeking proposals for refuse collection, transportation, and disposal services to support the Directorate of Public Works at the base. Services are required for collection from all refuse generated locations on the base including housing, food service, administrative offices, medical facilities, and operational areas. A site visit will be held on May 25th, 2022, with registration due by May 23rd. Questions on the solicitation must be submitted in writing by May 27th. The point of contacts for the solicitation are Ms. Elsa Gomez and Ms. Amanda Silva and can be reached by email.
View the file
Other files for this federal contract opportunity
Show all 22
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
COMPACTION & RECYCLING SOLUTIONS
The specific Lock-Out and Tag-Out instructions may vary from company to company (i.e. multiple locks may be required, or other machinery may need to be locked-out and tagged-out). The following instructions are provided as minimum guidelines.
*Determined by the size and capacity of the container.
Normal Business Hours:
Monday-Friday 8:00am - 5:00pm
(Central Standard Time)
1. This switch requires a key for operation. Insert the key and turn left to START compactor. Turn and hold the key for one to two seconds and release. The compactor will cycle the preset number of times determined by the Multi-Cycle Counter*, then stop. Turn the key to the right to start dumper. Remove key in center.
2.
3.
4.
*For more information on the Multi-Cycle Counter see PLC Maintenance page .
If you are loading the compactor through a door or gate, close it before starting the compactor. Refer to "Optional Loading Configurations” on page 13 to determine how your compactor is configure.
The specific Lock-Out and Tag-Out instructions may vary from company to company (i.e. multiple locks may be required, or other machinery may need to be locked-out and tagged-out). The following instructions are provided as minimum guidelines.
06-0038 06-0039 06-0249
06-3044 06-0121 06-0002
06-0072 06-0133 06-3123
06-0094 06-3726 06-0124
06-3976 06-1839
06-3231 06-0093 06-0104
06-0105 06-0052
06-0040 06-2751 06-3977
06-0057 06-3978 06-0364
06-0041 06-0087
File details come from the government source that posted it. Updated .