TDP PNTD0162.pdf

This is a Technical Data Package (TDP) for a Tube Connector component (NIIN: FNTDP0162) intended for use in critical shipboard systems for the U.S. Navy. The document establishes technical, quality, and material certification requirements for contractors supplying this component.

The tube connector must conform to Honeywell International Inc. drawing 3799950, Find No. 33, and be manufactured from SAE-AMS-QQ-S-763, class 302 or 304 material. The component is classified as a Special Emphasis Material requiring quantitative chemical and mechanical analysis. Key technical requirements include: intergranular corrosion testing (prior to fabrication/machining), ISO-9001 quality system compliance, material traceability with permanent markings (heat-lot or heat-treat numbers), 100% inspection for traceability markings and legibility, and certificate of compliance certifying full specification and requirement adherence. Material certification must include chemical composition and mechanical properties analysis traceable to traceability markings. The document prohibits mercury contamination and requires welding/weld repair to follow S9074-AR-GIB-010A/278 procedures with personnel and procedures qualified per S9074-AR-GIB-010A/248. Configuration control via Engineering Change Proposals (ECPs) is mandatory, with Class I changes requiring Government approval and Class II changes reviewed for concurrence. Material handling procedures must maintain traceability throughout all process operations, including manufacturing and fabrication. Receiving inspection must verify traceability marking agreement with certification test reports and confirm certification legibility and compliance. Payment and data submission are governed by clauses 252,232-7006 and 252,232-7003, with certification data submitted to Portsmouth Naval Shipyard prior to each material shipment under separate shipment numbers.