Tab_2_LTC PID Packaging Consolidated Text.docx

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:011647927

REFERENCE NUMBER:RQ032

DISK,CLUTCH

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

DISC SEPERATING, USED ON NAVY

STANDARD WINCH.

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 53711 5210161

REVISION NR C DTD 05/01/2016

PART PIECE NUMBER: 521

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C

UNIT CONT:E5 OPI:O

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

NSN:013787513

FRAME SECTION,STRUCTURAL,VEHICULAR

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:CQ042

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:ZD047

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12414567

REVISION NR J DTD 01/13/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420325

REVISION NR K DTD 07/09/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12414567

REVISION NR A DTD 02/29/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12414567

REVISION NR DTD 02/28/2024

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

SPECIAL PACKAGING INSTRUCTION: AK12787513

REVISION: A

DATED: 02/29/2024

Level Of Preservation: Military Level Of Packing: A

ZZ - SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP

OPEN THIS SIDE

MECHANICAL HANDLING REQUIRED

REFERENCE NUMBER:IP056 OBJECT TEXT ID ST

NSN:014197047

HUB ASSEMBLY, ROAD WHEEL.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RD002

CoC for DWG 12364377 CoC for DWG 12364379 CoC for DWG 5380856

REFERENCE NUMBER:ZD087

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD054

REFERENCE NUMBER:A1166

REFERENCE NUMBER:RD004

REFERENCE NUMBER:ZD004

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ZD047

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12364378

REVISION NR A DTD 09/19/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364377

REVISION NR DTD 11/12/1994

PART PIECE NUMBER: 12364377-2

IAW REFERENCE DRAWING NR 19207 12364689

REVISION NR DTD 10/26/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5380856

REVISION NR D DTD 09/19/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364379

REVISION NR DTD 10/26/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR H DTD 09/24/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364378

REVISION NR DTD 10/01/2024

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361

REVISION NR DTD 12/01/2017

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272

REVISION NR DTD 12/01/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364378

REVISION NR C DTD 10/10/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364378

REVISION NR A DTD 09/19/2016

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

ACORDING TO SPI AK14197047 REV C DATE 10/10/2024

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

NSN:014591021

RETAINER, EJECTOR CARTRIDGE, BOMB RACK

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ES371

REFERENCE NUMBER:CQ006

REFERENCE NUMBER:CS072

REFERENCE NUMBER:ZD003

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778-2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

GOVERNMENT FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE CONTACTED

TO PRICE THE FAT REQUIREMENT.

TWO (2) EXHIBITS ARE REQUIRED.

EXHIBIT DISPOSITION INSTRUCTIONS: ONE (1) PART MIGHT

BE RETURNED TO THE CONTRACTOR AND CAN BE INCLUDED

IN THE PRODUCTION QUANTITY. ONE (1) WILL BE

DAMAGED IN TESTING.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE

DCMA QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL MANUFACTURER

MUST BE SUBMITTED TO THE CONTRACTING OFFICER

FOR INCLUSION IN THE AWARD. UPON AWARD, ANY

CHANGES TO THE ABOVE MUST BE APPROVED BY THE

PCO VIA FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED,

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED..

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 82340 116053

REVISION NR AD DTD 04/13/2023

PART PIECE NUMBER: 116053-1

IAW REFERENCE DRAWING NR 82340 EDO5370-130

REVISION NR A DTD 07/18/1986

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82340 EDO5370-43

REVISION NR C DTD 05/05/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82340 EDO5370-57

REVISION NR C DTD 01/26/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82340 EDO5370-98

REVISION NR E DTD 01/19/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 PS21202

REVISION NR AR DTD 09/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76301 P.S.23001

REVISION NR T DTD 12/03/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR E DTD 01/30/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82340 EI-014591021

REVISION NR DTD 09/22/2021

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP014591021

REVISION NR DTD 11/17/2023

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

NSN:016703433

COVER ACCESS

REFERENCE NUMBER:RD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ES371

_______________EXCEPTION DATA____________________

DRAWING 11583106

FROM:

DISTRIBUTION STATEMENT D.

TO:

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT D.

______________END OF EXCEPTIONS__________________

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778-2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY

IDENTIFIED ON THIS CONTRACT. THE IDENTIFICATION

OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO

THE CONTRACTING OFFICER FOR INCLUSION IN THE

AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST

BE APPROVED BY THE PCO VIA FORMAL CONTRACT

MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED,

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES<(>,<)> UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 1NUW7 11583106

REVISION NR DTD 06/30/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 QAP-APPX-BL

REVISION NR DTD 07/31/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 12521199

REVISION NR A DTD 05/28/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 11583106

REVISION NR DTD 05/01/2018

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 11583106

REVISION NR DTD 06/30/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 11583106

REVISION NR DTD 10/16/2023

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER RD004

RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICATION LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER CQ042

THIS NSN REQUIRES GOVERNMENT SOURCE INSPECTION

WITH A FIRST ARTICLE TEST REQUIREMENT. THE

GOVERNMENT SOURCE INSPECTION REQUIREMENT IS

VALID WHETHER OR NOT THE FIRST ARTICLE TEST

REQUIREMENT IS INVOKED.

REFERENCE NUMBER ZD047

Casting and Forging information was added to the POT to enhance the solicitation process. Please do not remove. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

REFERENCE NUMBER IP056

IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,

PACKAGING, PACKING AND MARKING.

REFERENCE NUMBER ZD087

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER ZD054

CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,

UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.

REFERENCE NUMBER A1166

RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)

AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR

EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING

ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE

UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE

TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE

DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER

BEARINGS.

A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL

BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT

https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN

A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND

HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO

PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD

FOR AWARD.

IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS

SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL

REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED

WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE

RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS

225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.

REFERENCE NUMBER ZD004

A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

REFERENCE NUMBER ZD003

A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER RD001

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

REFERENCE NUMBER ES371

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.

(End of TQ Requirement)

REFERENCE NUMBER CQ006

"CONTRACTOR/MANUFACTURER IS REQUIRED TO

ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT

MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994,

AMERICAN NATIONAL STANDARD FOR CALIBRATION -

CALIBRATION LABORATORIES AND MEASURING AND TEST

EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1,

QUALITY ASSURANCE REQUIREMENTS FOR MEASURING

EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION

SYSTEM FOR MEASURING EQUIPMENT."

REFERENCE NUMBER CS072

CLASS 3 THREADS APPLY TO THIS NSN.