T3060 18DPP00160 Offer and Acceptance Page.pdf
PDF 267 KB Posted
- Attached to
- T3060 Crawler/Dozer, Screened Cab Enclosure, Low Ground Pressure, Diesel, with Min. 2 Cu. Yd. Blade
- Solicitation number
- 18DPP00160
- Issued by
- New Jersey
About this file
This document is an Offer and Acceptance form for a contract between the State of New Jersey Department of the Treasury Division of Purchase and Property and a Vendor/Bidder. The contract is for a Crawler/Dozer with a Screened Cab Enclosure, Low Ground Pressure, Diesel Engine, and a Minimum 2 Cu. Yd. Capacity Blade and Hydraulic System for Rear Mounted Attachments. The contract is open to cooperative purchasing, meaning other jurisdictions may also purchase from the contract. The contract term is not specified.
The Vendor/Bidder must agree to terms and conditions set forth in the State of New Jersey Standard Terms and Conditions, as well as certifications regarding MacBride Principles, Subcontractors, Non-Collusion, and the New Jersey Business Ethics Guide. The Vendor/Bidder's failure to meet the contract terms may result in suspension or debarment from further State bidding. For set-aside contracts, the Vendor/Bidder must be registered with the New Jersey Division of Revenue and Enterprise Services, Small Business Registration and M/WBE Certification Services Unit. The Vendor/Bidder may identify as a Minority-Owned or Women-Owned Business.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
OFFER AND ACCEPTANCE
State of New Jersey
Department of the Treasury Division of Purchase and Property 33 West State Street, P.O. Box 230 Trenton, New Jersey 08625-0230
Bid Solicitation {RFP} #:
Bid Solicitation {RFP} Title:
OFFER (To be completed by the Vendor {Bidder})
TO THE STATE OF NEW JERSEY:
The Undersigned hereby offers and agrees to furnish the goods, products, or services in compliance with all terms of this Master Blanket Purchase Order (Blanket P.O.) {Contract} as defined in Section 2.0 of the Bid Solicitation {Request for Proposal (RFP)}.
Vendor {Bidder}: Title:
Address: E-Mail Address:
City, State, ZIP: Phone Number:
Fax Number:
Printed Name: FEIN:
By signing and submitting this Offer, the Vendor {Bidder} certifies and confirms that:
1. The Vendor {Bidder} has read, understands, and agrees to all terms, conditions, and specifications set forth in the State of New Jersey Standard Terms and Conditions and the provisions set forth in Bid Solicitation {RFP} Section 4.4.1.1.1 (MacBride Principles Certification), Section 4.4.1.1.2 (No Subcontractor Certification), Section 4.4.1.1.3 (Non-Collusion), and Section 4.4.1.1.4 (New Jersey Business Ethics Guide Certification);
2. The Vendor's {Bidder's} failure to meet any terms and conditions of the Blanket P.O. {Contract} as defined in the Bid Solicitation {RFP} shall constitute a breach and may result in suspension or debarment from further State bidding;
3. A defaulting Vendor {Contractor} may also be liable, at the option of the State, for the difference between the Blanket P.O {Contract} price and the price bid by an alternate vendor of the goods or services in addition to other remedies available; and
4. By signing and submitting this Offer, the Vendor {Bidder} consents to receipt of any and all documents related to this Bid Solicitation {RFP} and the resulting Blanket P.O. {Contract} by electronic medium or facsimile.
Blanket P.O. {Contract} Term: Open to Cooperative Purchasing
ACCEPTANCE OF OFFER (For State Use Only) The Offer above is hereby accepted and now constitutes a Blanket P.O. {Contract} with the State of New Jersey. The Vendor {Contractor} is now bound to sell the goods, products, or services listed by the attached Blanket P.O. {Contract} as defined by Section 2.0 of the Bid Solicitation {RFP}. The Vendor {Contractor} shall not commence any work or provide any good, product, or service under this Blanket P.O. {Contract} until the Vendor {Contractor} complies with all requirements set forth in the Bid Solicitation {RFP} and receives written notice to proceed.
Blanket P.O. {Contract} Number:
Blanket P.O. {Contract} Effective Date:
State of New Jersey Authorized Signature:
Blanket P.O. {Contract} Award Date:
THIS FORM SHOULD BE SIGNED, COMPLETED AND INCLUDED WITH THE VENDOR'S {BIDDER'S} QUOTE {PROPOSAL}.
ADDITIONAL VENDOR {BIDDER} REQUIREMENTS (For State Use Only)
Performance Security
For set-aside contracts only, a Vendor {Bidder} must be registered with the N.J. Division of Revenue and Enterprise Services, Small Business Registration and M/WBE Certification Services Unit. Please refer to N.J.A.C. 17:13-3.1 & 17:13-3.2 for additional information.
Amount:
Bid Security Amount: Payment Security
Authorized Signature:
(Electronic Signature Acceptable)
Amount:
Percentage: Retainage
Pursuant to P.L. 2017, c. 95, please indicate whether the Vendor {Bidder} identifies as any of the following as defined in N.J.S.A. 52:32-19:
Minority-Owned Business Women-Owned Business Not Applicable
9.0.0.2.20120627.2.874785
OFFER AND ACCEPTANCE
State of New Jersey Department of the Treasury Division of Purchase and Property 33 West State Street, P.O. Box 230 Trenton, New Jersey 08625-0230 OFFER (To be completed by the Vendor {Bidder})
TO THE STATE OF NEW JERSEY:
The Undersigned hereby offers and agrees to furnish the goods, products, or services in compliance with all terms of this Master Blanket Purchase Order (Blanket P.O.) {Contract} as defined in Section 2.0 of the Bid Solicitation {Request for Proposal (RFP)}.
By signing and submitting this Offer, the Vendor {Bidder} certifies and confirms that:
1. The Vendor {Bidder} has read, understands, and agrees to all terms, conditions, and specifications set forth in the State of New Jersey Standard Terms and Conditions and the provisions set forth in Bid Solicitation {RFP} Section 4.4.1.1.1 (MacBride Principles Certification), Section 4.4.1.1.2 (No Subcontractor Certification), Section 4.4.1.1.3 (Non-Collusion), and Section 4.4.1.1.4 (New Jersey Business Ethics Guide Certification);
2. The Vendor's {Bidder's} failure to meet any terms and conditions of the Blanket P.O. {Contract} as defined in the Bid Solicitation {RFP} shall constitute a breach and may result in suspension or debarment from further State bidding;
3. A defaulting Vendor {Contractor} may also be liable, at the option of the State, for the difference between the Blanket P.O {Contract} price and the price bid by an alternate vendor of the goods or services in addition to other remedies available; and
4. By signing and submitting this Offer, the Vendor {Bidder} consents to receipt of any and all documents related to this Bid Solicitation {RFP} and the resulting Blanket P.O. {Contract} by electronic medium or facsimile.
ACCEPTANCE OF OFFER (For State Use Only) The Offer above is hereby accepted and now constitutes a Blanket P.O. {Contract} with the State of New Jersey. The Vendor {Contractor} is now bound to sell the goods, products, or services listed by the attached Blanket P.O. {Contract} as defined by Section 2.0 of the Bid Solicitation {RFP}. The Vendor {Contractor} shall not commence any work or provide any good, product, or service under this Blanket P.O. {Contract} until the Vendor {Contractor} complies with all requirements set forth in the Bid Solicitation {RFP} and receives written notice to proceed.
THIS FORM SHOULD BE SIGNED, COMPLETED AND INCLUDED WITH THE VENDOR'S {BIDDER'S} QUOTE {PROPOSAL}.
ADDITIONAL VENDOR {BIDDER} REQUIREMENTS (For State Use Only) For set-aside contracts only, a Vendor {Bidder} must be registered with the N.J. Division of Revenue and Enterprise Services, Small Business Registration and M/WBE Certification Services Unit. Please refer to N.J.A.C. 17:13-3.1 & 17:13-3.2 for additional information.
Pursuant to P.L. 2017, c. 95, please indicate whether the Vendor {Bidder} identifies as any of the following as defined in N.J.S.A. 52:32-19:
Three Years
| TextField1: 18DPP00160 |
| TextField1: T3060 Rebid: Crawler/Dozer with Screened Cab Enclosure, Low Ground Pressure, Diesel Engine, Mn. 2 Cu. Yd. Capacity Blade and Hydraulic System for Rear Mounted Attachments |
| : |
| CheckBox1: 1 |
| CheckBox2: 0 |
| CheckBox2: 0 |
| CheckBox2: 0 |
| CheckBox2: 0 |
| TextField2: |
| CheckBox3: 0 |
| CheckBox4: 0 |
| CheckBox5: 0 |
File details come from the government source that posted it. Updated .