A02 Peformance Work Statement_(PWS)_JO-B-YDM_A5_20260219.pdf

This document contains information sensitive to the Government of the Hashemite Kingdom of Jordan.

Distribution beyond Official US Government channels is not authorized without the express consent of the

Government of the Hashemite Kingdom of Jordan.

Jordan Command, Control, Communications, Computers, and Intelligence, Surveillance, and Reconnaissance

(JC4ISR)

Performance Work Statement (Version 3.2)

Jordan Armed Forces

Highest Financial Requirement – Information Technology Equipment

Prepared by the United States Army

Communications Electronics Command (CECOM) Security Assistance Management Division (SAMD)

Aberdeen Proving Grounds, Maryland

February 19, 2026

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[1]

Table Of Content

1 SCOPE

1.1 BACKGROUND

1.2 PERIOD OF PERFORMANCE / PLACE OF PERFORMANCE

1.3 CONTRACT TYPE AND CONTRACT MANAGEMENT

1.4 POST-AWARD CONFERENCE

1.5 TRANSPORTATION/INSPECTION AND ACCEPTANCE

1.6 SECURITY

2 APPLICABLE DOCUMENTS

3 REQUIREMENTS

3.1 CONTRACTOR ACQUIRED EQUIPMENT/MATERIAL

3.2 PROGRAM MANAGEMENT

3.3 IT TECHNICAL REQUIREMENTS

3.3.1 C8300 Router

3.3.2 C8200 Router

3.3.3 C9200 Switch

3.3.4 Network Module

3.3.5 Desktop Computer

3.3.6 Monitor

3.3.7 Laptop Computer

3.3.8 External USB DVD ROM

3.3.9 Enterprise Laser Printer

3.3.10 Multifunction All in One Printer

3.3.11 ADF Scanner

3.4 TRANSFERABLE ORIGINAL EQUIPMENT MANUFACTURER (OEM) COMMERCIAL WARRANTIES

4 ACRONYMS

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[2]

1 SCOPE

The US Army Communications Electronic Command (CECOM) Security Assistance Management Directorate (SAMD) has been tasked to assist the Royal Hashemite Kingdom of Jordan’s Armed Forces (JAF) in improving the Jordan C4ISR (JC4ISR) capability. The primary focus of this effort will be to provide an increase in operational effectiveness by integrating design and equipment enhancements with the existing capability in country and provide the flexibility to allow for increased interoperability with other Jordanian defense systems.

1.1 BACKGROUND

As used in this PWS, the definitions for the following terms apply:

• Government – U.S. Government on behalf of Jordan

• End User – Jordan Armed Forces

• Program/Project – JC4ISR-IT: Jordan Armed Forces Information Technology Equipment

1.2 PERIOD OF PERFORMANCE / PLACE OF PERFORMANCE

The Contract’s total period of performance shall not exceed eight (8) months from date of contract award. All equipment/material procurements and deliveries shall be accomplished within the contract’s period of performance. The contractor shall procure Original Equipment Manufacturer (OEM) commercial warranties as a part of this effort.

1.3 CONTRACT TYPE AND CONTRACT MANAGEMENT

This effort shall be a Firm Fixed price (FFP) contract. The Contracting Officer and Specialist will be from the Army Contracting Command (ACC) and the Contracting Officer Representative (COR) will be from CECOM SAMD.

1.4 POST-AWARD CONFERENCE

The Government intends to convene a post award conference no later than twenty

(20) days after Contract award. The Contracting Officer will notify the Contractor of the specific date, the CONUS location in the vicinity of Aberdeen Proving Ground, MD, and the agenda of the post award within ten (10) days of contract award.

1.5 TRANSPORTATION/INSPECTION and ACCEPTANCE

Pursuant to the Letter of Offer and Acceptance JO-B-YDM and FMS procedures, Inspection and Acceptance shall be at Origin by a delegated US Government Representative for all equipment and materials procured in CONUS and delivered under this contract. Origin is defined as the contractor’s facilities in CONUS. The final contract from the ACC will define the final transportation logistical requirements.

1.6 SECURITY

There are no U.S. Government security requirements for this effort and a DD 254 will not be required.

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[3]

2 APPLICABLE DOCUMENTS

Reserved

3 REQUIREMENTS

The contractor shall provide the Information Technology (IT) equipment identified within the PWS. The contractor shall provide:

• Program Management,

• Material procurement,

• Logistics

3.1 Contractor Acquired Equipment/Material

The contractor shall provide all materials and equipment necessary to meet the requirements of this PWS. The Contractor shall provide new, unused equipment, including but not limited to routers, computers, scanners and printers. All commercial material warranties that run with incidental items purchased shall be transferred to the government.

3.2 PROGRAM MANAGEMENT

The Contractor shall designate a Program Manager (PM) to oversee all aspects of contract performance. The designated PM shall utilize an appropriate management system to ensure that all programmatic, logistical, and special requirements are executed in a timely and compliant manner. The PM shall serve as the single point of contact within the Contractor’s organization for all matters related to program status, including administrative, managerial, and financial reporting.

The Contractor shall develop an Integrated Master Schedule which shall include scheduling details for equipment delivery, and acceptance by the government. This Master Schedule will also include scheduled completion and delivery of all required CDRLs and other contract documentation in accordance with CDRL, DD Form 1423, Data Item A001, DO-MGMT-81650, Integrated Master Schedule.

The contractor shall continuously monitor the technical performance of this contract, to include all subcontractors and deliver to the Government a monthly assessment report in accordance with CDRL, DD Form 1423, Data Item A002, DO-MGMT- 81466A, Contract Performance Report. This report will convey the status of contractor activity during the previous month as well as cumulative contract performance. The performance report as a minimum shall discuss:

a. Significant accomplishments and issues that arose during the reporting period

b. Projected activities for the following and subsequent periods

c. Subcontractor performance when applicable

d. Program risks and mitigation efforts (technical, cost & schedule)

e. Status of performance payments, as applicable

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[4]

f. Dates and quantities of any hardware/software shipments to/from the contractor’s warehouse

g. Any general meetings that occurred with the Government or End User representatives during the reporting period

The Contractor shall participate in regularly scheduled teleconferences and meetings, as required, to discuss contract performance, ongoing activities, and potential issues to mitigate program risk. The Contractor shall document and report all meetings and teleconferences in accordance with standard commercial practices.

3.3 IT TECHNICAL REQUIREMENTS

The contractor shall provide IT equipment as defined in Table 1 – IT Equipment. All hardware shall include all necessary ancillary equipment required for full system functionality in Jordan. Keyboards shall include Arabic lettering. All hardware shall be compatible with Jordanian power standards, including but not limited to BS 1363 three-pin plugs and sockets, and shall operate on 230V, 50Hz electrical power.

Table 1 – IT Equipment

Item Item Description Quantity Item Requirements Para A C8300 Router 8 3.3.1 B C8200 Router 100 3.3.2 C C9200 Switch 100 3.3.3 D Networking Module 100 3.3.4 E Desktop Computer 200 3.3.5 F Monitor 200 3.3.6 G Laptop Computer 100 3.3.7

H DVD ROM 100 3.3.8

I Enterprise Laser Printer 150 3.3.9 J Multifunctional All-in-One Printer 50 3.3.10 K Scanner 50 3.3.11

3.3.1 C8300 Router

The contractor shall provide QTY 8 of Cisco part number C8300-2N2S-4T2X, which consists of a Cisco Catalyst C8300-2N2S-4T2X router. Routers shall be Trade Agreements Act (TAA) compliant, in accordance with Federal Acquisition Regulation (FAR) 52.225-5. The country of origin must be a designated TAA-compliant country, and the Contractor shall provide documentation upon request to verify compliance, routers shall be TAA certified. Each router shall consist of the following subcomponents which are found in Table 2 - C8300 Router Components.

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[5]

If item subcomponents become end-of-life at Request For Proposal (RFP) (example, power cable part number), the contractor is permitted to propose the equivalent or better subcomponent; however, the contractor cannot propose a different router to meet this Cisco C8300 requirement. The contractor is also permitted to propose additional subcomponents that are not listed in the table below (example, additional zero-dollar part numbers auto-populated by the manufacturer).

Table 2 - C8300 Router Components

Line Item Part Number Description Qty

C8300-2N2S-4T2X Cisco Catalyst C8300-2N2S-4T2X Router

2 CON-SNT-C8302TNX

SNTC-8X5XNBD Cisco Catalyst C8300

3 MEM-C8300-8GB

Cisco Catalyst 8300 Edge 8GB memory

4 M2USB-16G

Cisco Catalyst 8000 Edge M.2 USB 16GB

5 C-RFID-2R

RFID - 2RU for Cisco 8200/8300 Series

6 C8300-RM-19-2R

Cisco Catalyst 8300 Rack mount kit - 19" 2R

7 C8300-PIM-BLANK PIM Blank for Cisco 8300 Series 8

8 C8300-FAN-2R

Cisco Catalyst 8300 Edge Fan Tray, 2RU

9 NETWORK-PNP-LIC

Network Plug-n-Play Connect for zero-touch device deployment 8

10 C-POE-COVER

Cover for empty POE slot on Cisco Catalyst Edge 8300

11 TE-R-SW

TE agent for IOSXE on Enterprise Routing

12 C8000-HSEC

U.S. Export Restriction Compliance license for C8000 series

13 SC8KBEUK9-1712 UNIVERSAL 8

14 IOSXE-AUTO-MODE

IOS XE Autonomous for Unified image

15 NIM-8MFT-T1/E1

8 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module

16 NIM-8MFT-T1/E1

8 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module

17 NIM-8MFT-T1/E1

8 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module

18 C-SM-NIM-ADPT

Cisco Catalyst SM to NIM Module Adaptor

19 C-SM-NIM-ADPT

Cisco Catalyst SM to NIM Module Adaptor

20 PWR-CC1-650WAC Cisco C8300 2RU AC Power supply 16

21 CAB-ACU

AC Power Cord (UK), C13, BS 1363, 2.5m

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[6]

Line Item Part Number Description Qty

22 DNA-C8300-SW

Cisco DNA subscription for C8300 series

23 DNA-P-T1-A-3Y

Cisco DNA Advantage On-Prem Lic 3Y - upto 250M (Aggr, 500M) 8

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

24 SVS-PDNA-ADV

Cisco Support Standard - Tiered DNA Advantage On-Prem

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

25 DSTACK-T1-A

Cisco DNA Advantage Stack - upto 250M (Aggr, 500M)

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

26 NWSTACK-T1-A

Cisco Network Advantage Stack - upto 250M (Aggr, 500M)

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

27 TE-EMBED-WANI

Cisco ThousandEyes WAN Insights Embedded

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

28 SDWAN-UMB-ADV Cisco Umbrella for DNA Advantage 8 Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

29 DNAC-ONPREM-PF

Cisco DNA Center On Prem Deployment Option for WAN

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

30 C83-2N2S-4T2X-PF

C8300-2N2S-4T2X Platform Selection for DNA Subscription

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

31 IOSXE-AUTO-MODE-PF

IOS XE Autonomous for Unified image

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

32 NIM-8MFT-T1/E1

8 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module

Please ensure your technical proposal for the C8300 build captures all line items above.

3.3.2 C8200 Router

The contractor shall provide QTY 100 of Cisco part number C8200-1N-4T, which consists of a Cisco Catalyst C8200-1N-4T router. Routers shall be Trade Agreements Act (TAA) compliant, in accordance with Federal Acquisition Regulation (FAR) 52.225-5. The country of origin must be a designated TAA-compliant country, and the Contractor shall provide documentation upon request to verify compliance. Each router shall consist of the following subcomponents which are found in Table 3 - C8200 Roter Components.

If item subcomponents become end-of-life at Request For Proposal (RFP) (example, power cable part number), the contractor is permitted to propose the

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[7] equivalent or better subcomponent; however, the contractor cannot propose a different router to meet this Cisco C8200 requirement. The contractor is also permitted to propose additional subcomponents that are not listed in the table below (example, additional zero-dollar part numbers auto-populated by the manufacturer).

Table 3 - C8200 Router Components

Line Part Number Description Qty

1 C8200-1N-4T Cisco Catalyst C8200-1N-4T Router 100

2 CON-SNT-C82001N4 SNTC-8X5XNBD Cisco Catalyst C8200 100

3 MEM-C8200-8GB Cisco Catalyst 8200 Edge 8GB memory 100 4 M2USB-16G Cisco Catalyst 8000 Edge M.2 USB 16GB 100 5 C-RFID-1R RFID - 1RU for Cisco 8200/8300/8400/8500L Series 100

6 C8200-RM-19-1R Cisco Catalyst 8200 Rack mount kit - 19" 1R 100

7 NETWORK-PNP-LIC Network Plug-n-Play Connect for zero-touch device deployment 100

8 C8200-PIM-BLANK PIM Blank for Cisco 8200 Series 100 9 TE-R-SW TE agent for IOSXE on Enterprise Routing 100

10 C8000-HSEC U.S. Export Restriction Compliance license for C8000 series 100

11 CAB-ACU AC Power Cord (UK), C13, BS 1363, 2.5m 100

12 SC8KBEUK9-1712 UNIVERSAL 100

13 IOSXE-AUTO-MODE IOS XE Autonomous for Unified image 100

14 NIM-4MFT-T1/E1 4 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module 100

15 DNA-C8200-SW Cisco DNA subscription for C8200 series 100

16 DNA-P-T0-A-3Y Cisco DNA Advantage On-Prem Lic 3Y - upto 25M (Aggr, 50M) 100

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

17 DSTACK-T0-A

Cisco DNA Advantage Stack - upto 25M (Aggr, 50M)

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

18 NWSTACK-T0-A

Cisco Network Advantage Stack - upto 25M (Aggr, 50M)

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

19 TE-EMBED-WANI

Cisco ThousandEyes WAN Insights Embedded

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

20 SDWAN-UMB-ADV Cisco Umbrella for DNA Advantage 100 Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

21 DNAC-ONPREM-PF

Cisco DNA Center On Prem Deployment Option for WAN

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

22 C82-1N-4T-PF

C8200-1N-4T Platform Selection for DNA Subscription

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[8]

Line Part Number Description Qty Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

23 IOSXE-AUTO-MODE-PF

IOS XE Autonomous for Unified image

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term

24 SVS-PDNA-ADV

Cisco Support Standard - Tiered DNA Advantage On-Prem

Initial Term - 36.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term 25 CAB-ACU AC Power Cord (UK), C13, BS 1363, 2.5m 100 26 PWR-CC1-150WAC Cisco C8200 1RU AC 150W PoE Power supply 100

Please ensure your technical proposal for the C8200 build captures all line items above.

3.3.3 C9200 Switch

The contractor shall provide QTY 100, Cisco part number C9200L-24T-4G-A, which consists of a Cisco C9200L-24T-4G-A router. Switches shall be Trade Agreements Act (TAA) compliant, in accordance with Federal Acquisition Regulation (FAR) 52.225-5. The country of origin must be a designated TAA-compliant country, and the Contractor shall provide documentation upon request to verify compliance. Each router shall consist of the following subcomponents which are found in Table 4 - C9200 Switch components.

If item subcomponents become end-of-life at Request For Proposal (RFP) (example, power cable part number), the contractor is permitted to propose the equivalent or better subcomponent; however, the contractor cannot propose a different router to meet this Cisco C9200 requirement. The contractor is also permitted to propose additional subcomponents that are not listed in the table below (example, additional zero-dollar part numbers auto-populated by the manufacturer).

Table 4 - C9200 Switch components

Line Part Number Description Qty

1 C9200L-24T-4G-A++ TAA C9200 24p data only, 4 x 1G, Network Advantage 100

2 CON-L1NCD-C920L24A CX LEVEL 1 8X7NCDCatalyst 9200L 24port data only 4 x 1G 100

3 CAB-TA-UK United Kingdom AC Type A Power Cable 200

4 C9200L-DNA-A-24 C9200L Cisco DNA Advantage, 24-port Term license 100

5 CON-L1SWT-C92LA24 CX LEVEL 1 SW SUB C9200L Cisco DNA Adv 100

6 C9200L-DNA-A-24-3Y C9200L Cisco DNA Advantage, 24-port, 3 Year Term license 100

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[9]

Line Part Number Description Qty

7 CAB-GUIDE-1RU 1RU CABLE MANAGEMENT GUIDES 9200 and 9300 100

8 C9K-ACC-RBFT RUBBER FEET FOR TABLE TOP SETUP 9200 and 93xx 100

9 C9K-ACC-SCR-4 12-24 and 10-32 SCREWS FOR RACK INSTALLATION 400

10 C9200L-NW-A-24 C9200L Network Advantage, 24-port license 100

11 C9200-STACK-BLANK Catalyst 9200 Blank Stack Module 200

12 PWR-C5-125WAC/2 125W AC Config 5 Power Supply - Secondary Power Supply 100

13 NETWORK-PNP-NONE Network Plug-n-Play Opt Out SKU 100

Please ensure your technical proposal for the C9200 build captures all line items above.

3.3.4 Network Module

The contractor shall provide QTY 100, Cisco part number “GLC-LH-SMD=” which consist of 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, Digital Optical Monitoring (DOM).

Table 5 – Network Module

5Lin e

Part Number Description

1 GLC-LH-SMD++= 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM

3.3.5 Desktop Computer

Contractor shall provide 200 desktop computers. The desktop computers shall meet or exceed the following components characteristics found in Table 5. Dell nomenclature was used to identify base hardware, software and warranty requirements. Contractor is permitted to offer Dell or equivalent item. If item below is end-of-life, Contractor shall propose a substitute that meets or exceeds the base requirements.

Table 6 – Desktop Computer Requirements

Line Part Number Description

Precision 3680 Tower, or equivalent Precision 3680 Tower CTO Base

2 Processor Intel Core i7 14700 (20 cores, 28 threads, up to 5.4 GHz, 65 W) 3 Chassis Options Precision 3680 Tower with 500W (80 Plus Platinum) PSU, DAO 4 Thermal Cooling Standard CPU Air Cooler

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[10]

Line Part Number Description 5 Memory 16GB: 1 x 16 GB, DDR5, 4400 MT/s, non-ECC 6 Video Card Intel Integrated Graphics only 7 Boot Drive C1 M.2 SSD Boot + SSD 8 Raid Connectivity No SATA RAID 9 1st M.2 NVMe SSD 1 TB, M.2 2280, Gen 4 PCIe NVMe, SSD

10 Network Card No Additional Network Card Selected (Integrated NIC included) 11 CD ROM/DVD ROM 8x DVD+/-RW/RAM 9.5mm Slimline Optical Disk Drive 12 Optical Software CMS Software not included 13 Systems Management Intel Management Engine with vPro 14 Keyboard Wired Keyboard Arabic 15 Mouse Dell Optical Mouse - MS116 (Black) 16 E-Star ENERGY STAR Qualified 17 EPEAT EPEAT 2018 Registered (Gold) 18 Power Cord System Power Cord C13 (UK 220V, 15A) 19 Documentation/Disks SERI Guide (ENG/FR/Multi) 20 Internal Speakers Internal Speaker for Precision 21 Hard Drive Software Intel Rapid Storage Technology Driver, Precision 3680T 22 Hardware Support Dell Limited Hardware Warranty Plus Service 23 Hardware Support Jordan Onsite/In-Home Service After Remote Diagnosis 3 Years 24 Operating System Windows 11 Pro, English, Brazilian Portuguese PT-BR, French, Spanish 25 Dell Premier Color Dell Premier Color 6.2

3.3.6 Monitor

Contractor shall provide QTY 200, Dell Ultra Sharp 24" monitor, or equivalent, with the following features:

• UltraSharp 24 Monitor - U2424H

• Limited Hardware Warranty

• Advanced Exchange Service, 3 Years

Dell nomenclature was used to identify base hardware and warranty requirements.

Contractor is permitted to offer Dell or equivalent item. If item above is end-of-life, Contractor shall propose a substitute that meets or exceeds the base requirements.

3.3.7 Laptop Computer

QTY 100, Dell Mobile Precision 3571 laptop computer, or equivalent, with the following features found in Table 6. Dell nomenclature was used to identify base hardware, software and warranty requirements. Contractor is permitted to offer Dell or equivalent item. If item below is end-of-life, Contractor shall propose a substitute that meets or exceeds the base requirements.

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[11]

Table 7 – Laptop Computer Requirements

Line Description

1 Dell Mobile Precision Workstation 3591, or equivalent 2 Ultra 5 135H vPro Enterprise (14 cores, 18 threads, to 4.6 GHz, 45W) 3 Ultra 5 135H Processor with vPro and Intel Integrated Graphics 4 Intel vPro Management Disabled 5 Intel Graphics or Intel Arc Pro Graphics 6 15.6" FHD 1920x1080, 60Hz, 250 nits, Non-Touch, Mic, WLAN 7 FHD HDR IR Camera, Express Sign-In, No Intelligent Privacy, TNR, Camera Shutter, Microphone 8 16 GB: 1 x 16 GB, DDR5, 5600 MT/s, non-ECC 9 1TB, M.2 2230, Gen4 PCIe NVMe, SSD, Class 35

10 Arabic Keyboard Single Pointing Non-Backlit and numeric keypad 11 Single Pointing, Smart Card Reader, CV3+, Non-Backlit Keyboard 12 Intel AX211, 2x2 MIMO, 2400 Mbps, 2.4/5/6 GHz, Wi-Fi 6/6E, Bluetooth 13 4 Cell, 64WHr, Standard Battery 14 4 Cell Battery Cable 15 100W AC adapter, USB Type-C, EPEAT, TCO Gen9 compliant 16 ENERGY STAR Qualified 17 Intel® Core™ Ultra 5 non-vPro Processor Label 18 ProSupport: 7x24 Technical Support, 3 Years 19 Dell Limited Hardware Warranty Plus Service 20 ProSupport: Next Business Day Jordan Onsite, 3 Years 21 Windows 11 Pro, English, Brazilian Portuguese PT-BR, French, Spanish

3.3.8 External USB DVD ROM

Qty 100, Dell External USB Slim DVD +/– RW Optical Drive, or equivalent. Plug and play disc burning and disc playing solution that you can use with a USB port. non-

TAA

3.3.9 Enterprise Laser Printer

Contractor shall provide QTY 150, HP LaserJet Enterprise M507 Printers, or equivalent, with the following features:

Table 8 – Enterprise Laser Printer Requirements

Line Printer Requirements 1 HP LaserJet Enterprise M507dng 1PV89A#AAZ – or equivalent 2 Normal: Up to 45 ppm (default); Up to 52 ppm (HP High Speed) 3 Printing Method- Monochrome 4 1200 X 1200 dpi resolution 5 Double Sided Printing- Automatic duplex

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[12]

Line Printer Requirements 6 1.5 GB memory RAM 7 Hi-Speed Device USB 2.0 8 Hi-Speed USB 2.0 Host 9 Gigabit Ethernet

10 Hardware Integration Pocket 11 drivers and utilities included, USB cable 12 3-years warranty including labor and spare parts 13 Power AC 230 V – UK cable included

3.3.10 Multifunction All in One Printer

Contractor shall provide 50 monochrome printers. The printers shall meet or exceed the following components characteristics:

Table 9 – Multifunction All in One Printer Requirements

Line Printer Requirements 1 HP LaserJet Pro MFP M428fdw (W1A30A) or equivalent 2 Multi-Function Print, Copy, Scan, Fax 3 Up to 999 copies 4 Digital Color faxing through software 5 3 seconds per page 6 Up to 400 pages 7 1200 X 1200 dpi resolution 8 38 ppm

9 512MB RAM

10 Hi-Speed USB 2.0;

11 Gigabit Ethernet 10/100/1000BASET network; 802.3az(EEE);

12 802.11b/g/n/2.4/5 GHZ Wi-Fi radio, 13 RJ-11 Modem Port 14 3-years warranty including labor and spare parts 15 UK Power Cord

3.3.11 ADF Scanner

Contractor shall provide QTY 50, HP Scanjet Enterprise Flow N7000 scanner, or equivalent, with the following features:

Table 10 – ADF Scanner Requirements

Line Scanner Requirements 1 HP ScanJet Enterprise Flow N7000 snw1 or equivalent 2 Sheeted Scanner

Scan Mode- Duplex/ simplex, color/gray scale/ monochrome

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[13]

Line Scanner Requirements 4 600 dpi x 600 dpi 5 up to 75 ppm (mono) 6 up to 75 ppm (color)

7 150 IPM

8 ADF Capacity- 80 sheets 9 Recommended daily duty cycle: 7500 pages

10 Max Paper Size: A4, A5, and legal 8.5 x 122 in 11 Min Paper size: 2 x 2 in 12 USB enabled 13 Windows: 32-bit and 64-bit TWAIN version 2.1; Mac: n/a 14 Windows: HP WIA scan driver, HP TWAIN scan driver 15 Input Voltage range: 90 - 264 VAC, 16 Rated Frequency: 50 - 60HZ, Worldwide use;

17 Power cable, USB cable and software 18 3-years warranty including labor and spare parts 19 Power AC 230 V – UK cable

3.4 Transferable Original Equipment Manufacturer (OEM) Commercial

Warranties As a part of this procurement, the contractor shall procure extended OEM commercial warranties for all materials/incidental items which shall be transferable to the End User and will be valid for not less than 36 months. Warranty is understood to begin at equipment shipment to the vendor. The OEM warranty must be honored and serviced within Jordan by either an authorized OEM service provider located in Jordan, or an OEM-approved warranty channel that supports in-country service. All commercial warranties will be provided in accordance with commercial standards.

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[14]

4 ACRONYMS

ACA After Contract Award ALSC American Lumber Standard Committee

APO Army Post Office C2 Command and Control C4ISR Command, Control, Computers, Communications, Intelligence, Surveillance, and Reconnaissance CDR Critical Design Review CDRL Contractor Data Requirements List CFE Commercially-Furnished Equipment CoC Certificate of Completion CONUS Continental United States COTS Commercial off-the-shelf DIDs Data Item Descriptions DMEA Defense Microelectronics Activity DOD Department of Defense ECP Engineering Change Proposal FFP Firm Fixed Price FMS Foreign Military Sales FOB Freight on Board FOUO For Official Use Only GFE Government Furnished Equipment GHQ General Headquarters I&CO Installation and Checkout IAW In Accordance With ICASS International Cooperative Administrative Support Services ILS Integrated Logistics Support ILSP Integrated Logistics Support Plan ISO International Organization For Standardization ISPM International Standards for Phytosanitary Measures IUID Item Unique Identification JAF Jordan Armed Forces JC4ISR JAF Command, Control, Computers, Communications, Intelligence, Surveillance, and Reconnaissance JTR Joint Travel Regulations

Distribution beyond Official US Government channels is not authorized without the express consent of the Government of the Hashemite Kingdom of Jordan.

[15]

LHC Long Haul Communications LM Last mile LOA Letter of Offer and Acceptance NATO North Atlantic Treaty Organization O&M Operations and Maintenance OCONUS Outside the Continental United States PCO Procuring Contracting Officer PIPC Property in Possession of Contractor PM Program Manager PMR Program Management Review POC Point of Contact POP Period of Performance PWS Procurement Work Statement

QA Quality Assurance SAMD Security Assistance Management Directorate PWS Statement of Work SPO Special Projects Office SRD Systems Requirement Document STR System Trouble Report TIM Technical Interchange Meetings US United States USG United States Government WAN Wide Area Network WPM Wood Packing Material

3.4 Transferable Original Equipment Manufacturer (OEM) Commercial Warranties

4 ACRONYMS