SUMMARY OF WORK.pdf

PDF 186 KB Posted

Attached to
Open-End Painting USAG-HI
Solicitation number
W912CN22B0003
Issued by

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

SECTION 01026

SUMMARY OF WORK

PART 1 GENERAL

1.1 WORK COVERED BY CONTRACT DOCUMENTS

1.1.1 Project Description

Contractor shall furnish all labor, equipment, materials, and other services required to perform all work described below in strict accordance with these technical provisions. The scope of work covered by this Contract does not cover Exterior / Interior Painting work which might arise as part of a Contract to repair or renovate a Building or group of Buildings. This work covered by this Contract does not include projects awarded by The U.S. Army Engineering District, Honolulu.

1.1.2 DESCRIPTION OF WORK:

Exterior painting involving; Two-coat painting with masonry, wood and metal paint, to be applied on walls and other surfaces considered to be Exterior to include but not be limited to previously painted floors, stairs/steps, painted or varnished balcony walls, balcony ceilings, underside of eaves, and railings. Other work includes surface preparation and puttying, replacement of deteriorated surface or structural lumber, and priming of new and previously painted Oil Based painted surfaces, prior to painting with Latex paint.

Interior painting involving; Two coats of flat, semi-gloss and gloss latex paint. Paint will be applied on wood, metal, plywood, fiberwood, masonry, acoustic plaster, gypsum board; walls ceilings; doors, sashes, cabinets, closets, trim work, shelves, floors, and other surfaces considered to be Interior. Other work includes surface preparation and puttying; replacement of deteriorated floor sheathing, surface or structural lumber, and priming of new and previously painted Oil Base painted surfaces, prior to painting with Latex paint.

Furnish all labor, equipment, materials, and services necessary to complete the work in accordance with the Technical Provisions for Removal and Disposal of Lead Containing Paint, Miscellaneous Buildings at Various Army Installations, Island of Oahu, Hawaii. Exterior work consists of:

Misting (no hosing) of flaky paint prior to scraping.

Scraping and catching of flaky chips in plastic sheets and vacuuming of affected areas.

Collecting and storing of flaky chips in steel drums, secured in Poly-Paks and disposing of same in a timely manner.

Test collected paint chips to determine if Hazardous Waste (Minimum of one test per container).

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Contractor to provide a detailed procedure plan for the Exterior abatement work described above. For Interior work, Contractor to provide a paint removal plan. Plans to be submitted for approval within ten (10) calendar days after the award date of the contract.

1.2 ESTIMATED QUANTITIES

The estimated quantities of work, indicated herein, are for information of the prospective Contractors. The actual quantities ordered may be more or less than the estimated quantities.

LOCATIONS

The location of work sites shall be as follows:

Fort Shafter Areas

Fort Shafter Fort DeRussy Tripler Army Medical Center, (Except for the main Medical Bldg.) Aliamanu Military Reservation

Schofield Barracks Area

Schofield Barracks (includes East Range & Leilehua Golf Course, Wheeler Army Airfield Helemano Military Reservation)

The exact locations will be shown by the Contracting Officer.

1.3 ITEMS OF WORK

1.3.1 Base Year Estimated quantities, item numbers, units of measure, unit prices and amounts are as follows:

LOT: I Exterior/Interior Painting of Miscellaneous Buildings at Fort Shafter, Fort DeRussy, Tripler,(excluding the Medical Facilities (TAMC), and Buildings at Aliamanu Military Reservation), Schofield Barracks, Helemano Military Reservation, and Wheeler Army Airfield

BID ITEM NO. 0001

Pressure wash building exterior prior to painting. To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 0002

Two-coats exterior painting with two-coat masonry paint. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 400,000 S.F.

BID ITEM NO. 0003

Two-coats exterior painting of previously painted concrete steps, porches, and floors. To include clean-up, and all incidental items

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 0004

Two-coats exterior painting of wood surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50,000 S.F.

BID ITEM NO. 0005

Two-coats exterior painting of metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 0006

Two-coats exterior painting of galvanized surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 10,000 S.F.

BID ITEM NO. 0007

Replacement of exterior deteriorated surface lumber. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 B.F.

BID ITEM NO. 0008

Replacement of exterior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 0009

One-coat Exterior grade primer of bare or previously painted surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 0010

One-coat cement emulsion fill coat. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 0011

Non-Lead paint chips removal and disposal from various Wood surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 30,000 S.F.

BID ITEM NO. 0012

Non-Lead paint chips removal various Metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 5,000 S.F.

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

BID ITEM NO. 0013

Non-Lead paint chips removal and disposal from various Concrete surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 6,000 S.F.

BID ITEM NO. 0014

Non-Lead paint chips removal and disposal from various CMU surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 0015

Non-Lead paint chips removal and disposal from various drywall surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 0016

Remove mold prior to painting. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 0017

Two-coats interior painting with semi-gloss latex paint on wood, metal, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 200,000 S.F.

BID ITEM NO. 0018

Two-coats interior painting with gloss latex paint on wood, metal, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 0019

Two-coats interior painting with flat latex paint on wood, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 0020

Two-coats interior painting with flat latex paint on rough textured acoustical plaster ceilings. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 0021

Two-component Epoxy paint, with surface preparation, mixing, Epoxy base, and finish. To include clean-up, and all incidental items

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 0022

Replacement of interior deteriorated surface lumber. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 B.F.

BID ITEM NO. 0023

Replacement of interior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 0024

Repair/replace drywall. Provide 1/2" or 5/8 gypsum wallboard (match existing), tape edges, level 4 finish. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 0025

One-coat Interior grade primer of bare or previously painted surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 150,000 S.F.

BID ITEM NO. 0026

Sample analysis: Collection and laboratory analysis to determine if paint contains lead and resulting debris can be classified as hazardous waste. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 10 Ea.

BID ITEM NO. 0027

Soil sample testing prior to and after work completion. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 5 Ea.

BID ITEM NO. 0028

Collection and laboratory analysis to determine if paint exceeds regulatory limits for RCRA 8 materials and resulting debris can be classified as hazardous waste, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 30 Ea

BID ITEM NO. 0029

Lead based paint chips removal and disposal from Various Wood surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 0030

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Lead based paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 0031

Lead based paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 0032

Lead based paint chips removal and disposal from various CMU surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 0033

Lead based paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 0034

Lead containing paint chips removal and disposal from Various Wood surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 4,500 S.F.

BID ITEM NO. 0035

Lead containing paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 0036

Lead containing paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 0037

Lead containing paint chips removal and disposal from various CMU surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 0038

Lead containing paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 0039

Remove and replace existing gypsum board with lead-containing paint with

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 new gypsum board, to match existing thickness, (1/2" or 5/8" thick), tape edges, and dispose of existing. To include clean-up, and all incidental items necessary to complete the work. Estimated at 150 S.F

BID ITEM NO. 0040

Remove and replace existing Plywood panels with lead-containing paint with new Plywood panels, to match existing thickness, (1/2" or 5/8" thk.), and dispose of existing. To include clean-up, and all incidental items necessary to complete the work. Estimated at 150 S.F.

BID ITEM NO. 0041

Equipment Rental of Articulating Telescopic Boom lift with the following nominal/minimal requirements: (40’-0” to 10” working height, 60”x30” platform size, 500 lb capacity aluminum platform and 23’-0” to 7.5” horizontal reach. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 40 WK

BID ITEM NO. 0042

Equipment Rental of telescopic forklift with 55’-0” lift height and 10,000 lbs lift capacity. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 3 WK

BID ITEM NO. 0043

Surface preparation using Shot Blasting to clean and prepare existing surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50 S.F.

BID ITEM NO. 0044

Contractor shall install high performance epoxy floor coating to include sand blast, sealant, four coats epoxy system and stenciling. Estimated at 100 S.F.

BID ITEM NO. 0045

Contractor shall move all furniture prior to painting and return furniture to original location after painting. (EA equals Cubic Feet) Estimated at 1,000 EA.

BID ITEM NO. 0046

Scaffolding, stairs, landings erection and dismantling. To include delivery to jobsite, erection, dismantling and return to rental company.

To include all incidental items required to complete the work. (EA equals Cubic Feet) Estimated at 500 EA.

BID ITEM NO. 0047

Scaffolding rental per month. To include scaffolding, stairs, landings bracing and all incidental items required to complete the work. (EA equals Cubic Feet. 100 CF rented for 2 months will be paid at 200 EA) Estimated

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 at 500 EA.

BID ITEM NO. 0048

Non-Lead paint chips removal from various surfaces where excessive peeling is caused by latex paint over oil based paint. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

1.3.2 1st Option ITEMS OF WORK

1st Option Year Estimated quantities, item numbers, units of measure, unit prices and amounts are as follows:

BID ITEM NO. 1001

Pressure wash building exterior prior to painting. To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 1002

Two-coats exterior painting with two-coat masonry paint. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 400,000 S.F.

BID ITEM NO. 1003

Two-coats exterior painting of previously painted concrete steps, porches, and floors. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 1004

Two-coats exterior painting of wood surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50,000 S.F.

BID ITEM NO. 1005

Two-coats exterior painting of metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 1006

Two-coats exterior painting of galvanized surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 10,000 S.F.

BID ITEM NO. 1007

Replacement of exterior deteriorated surface lumber. To include clean-

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 at 100 B.F.

BID ITEM NO. 1008

Replacement of exterior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 1009

One-coat Exterior grade primer of bare or previously painted surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 1010

One-coat cement emulsion fill coat. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 1011

Non-Lead paint chips removal and disposal from various Wood surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 30,000 S.F.

BID ITEM NO. 1012

Non-Lead paint chips removal various Metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 5,000 S.F.

BID ITEM NO. 1013

Non-Lead paint chips removal and disposal from various Concrete surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 6,000 S.F.

BID ITEM NO. 1014

Non-Lead paint chips removal and disposal from various CMU surfaces.

BID ITEM NO. 1015

BID ITEM NO. 1016

BID ITEM NO. 1017

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 metal, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 200,000 S.F.

BID ITEM NO. 1018

Two-coats interior painting with gloss latex paint on wood, metal, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 1019

Two-coats interior painting with flat latex paint on wood, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 1020

Two-coats interior painting with flat latex paint on rough textured acoustical plaster ceilings. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 1021

Two-component Epoxy paint, with surface preparation, mixing, Epoxy base, and finish. To include clean-up, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 1022

Replacement of interior deteriorated surface lumber. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 B.F.

BID ITEM NO. 1023

Replacement of interior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 1024

Repair/replace drywall. Provide 1/2" or 5/8 gypsum wallboard (match

BID ITEM NO. 1025

work. Estimated at 150,000 S.F.

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

BID ITEM NO. 1026

Sample analysis: Collection and laboratory analysis to determine if paint contains lead and resulting debris can be classified as hazardous waste. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 10 Ea.

BID ITEM NO. 1027

Soil sample testing prior to and after work completion. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 5 Ea.

BID ITEM NO. 1028

Collection and laboratory analysis to determine if paint exceeds regulatory limits for RCRA 8 materials and resulting debris can be classified as hazardous waste, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 30 Ea

BID ITEM NO. 1029

Lead based paint chips removal and disposal from Various Wood surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 1030

Lead based paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 1031

Lead based paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 1032

Lead based paint chips removal and disposal from various CMU surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 1033

Lead based paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 1034

Lead containing paint chips removal and disposal from Various Wood items necessary to complete the work. Estimated at 4,500 S.F.

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

BID ITEM NO. 1035

Lead containing paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 1036

Lead containing paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 1037

Lead containing paint chips removal and disposal from various CMU surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 1038

Lead containing paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 1039

Remove and replace existing gypsum board with lead-containing paint with new gypsum board, to match existing thickness, (1/2" or 5/8" thick), tape

BID ITEM NO. 1040

with new Plywood panels, to match existing thickness, (1/2" or 5/8" thk.), BID ITEM NO. 1041 nominal/minimal requirements: (40’-0” to 10” working height, 60”x30” platform size, 500 lb capacity aluminum platform and 23’-0” to 7.5” horizontal reach. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 40 WK

BID ITEM NO. 1042

Equipment Rental of telescopic forklift with 55’-0” lift height and 10,000 lbs lift capacity. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 3 WK

BID ITEM NO. 1043

Surface preparation using Shot Blasting to clean and prepare existing

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 complete the work. Estimated at 50 S.F.

BID ITEM NO. 1044

Contractor shall install high performance epoxy floor coating to include sand blast, sealant, four coats epoxy system and stenciling. Estimated at 100 S.F.

BID ITEM NO. 1045

Contractor shall move all furniture prior to painting and return furniture to original location after painting. (EA equals Cubic Feet) Estimated at 1,000 EA.

BID ITEM NO. 1046

Scaffolding, stairs, landings erection and dismantling. To include delivery to jobsite, erection, dismantling and return to rental company.

To include all incidental items required to complete the work. (EA equals Cubic Feet) Estimated at 500 EA.

BID ITEM NO. 1047

Scaffolding rental per month. To include scaffolding, stairs, landings bracing and all incidental items required to complete the work. (EA equals Cubic Feet. 100 CF rented for 2 months will be paid at 200 EA) Estimated at 500 EA.

BID ITEM NO. 1048

Non-Lead paint chips removal from various surfaces where excessive peeling is caused by latex paint over oil based paint. To include clean-

1.3.3 2nd Option ITEMS OF WORK

2nd Option Year Estimated quantities, item numbers, units of measure, unit prices and amounts are as follows:

BID ITEM NO. 2001

Pressure wash building exterior prior to painting. To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 2002

Two-coats exterior painting with two-coat masonry paint. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 400,000 S.F.

BID ITEM NO. 2003

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Two-coats exterior painting of previously painted concrete steps, porches, and floors. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 2004

Two-coats exterior painting of wood surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50,000 S.F.

BID ITEM NO. 2005

Two-coats exterior painting of metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 2006

Two-coats exterior painting of galvanized surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 10,000 S.F.

BID ITEM NO. 2007

Replacement of exterior deteriorated surface lumber. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 B.F.

BID ITEM NO. 2008

Replacement of exterior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 2009

One-coat Exterior grade primer of bare or previously painted surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 2010

One-coat cement emulsion fill coat. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 2011

Non-Lead paint chips removal and disposal from various Wood surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 30,000 S.F.

BID ITEM NO. 2012

Non-Lead paint chips removal various Metal surfaces. To include clean-

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 at 5,000 S.F.

BID ITEM NO. 2013

Non-Lead paint chips removal and disposal from various Concrete surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 6,000 S.F.

BID ITEM NO. 2014

Non-Lead paint chips removal and disposal from various CMU surfaces.

BID ITEM NO. 2015

BID ITEM NO. 2016

BID ITEM NO. 2017

metal, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 200,000 S.F.

BID ITEM NO. 2018

Two-coats interior painting with gloss latex paint on wood, metal, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 2019

Two-coats interior painting with flat latex paint on wood, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 2020

Two-coats interior painting with flat latex paint on rough textured acoustical plaster ceilings. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 2021

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Two-component Epoxy paint, with surface preparation, mixing, Epoxy base, and finish. To include clean-up, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 2022

Replacement of interior deteriorated surface lumber. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 B.F.

BID ITEM NO. 2023

Replacement of interior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 2024

Repair/replace drywall. Provide 1/2" or 5/8 gypsum wallboard (match

BID ITEM NO. 2025

To include clean-up, and all incidental items necessary to complete the work. Estimated at 150,000 S.F.

BID ITEM NO. 2026

Sample analysis: Collection and laboratory analysis to determine if paint contains lead and resulting debris can be classified as hazardous waste. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 10 Ea.

BID ITEM NO. 2027

Soil sample testing prior to and after work completion. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 5 Ea.

BID ITEM NO. 2028

Collection and laboratory analysis to determine if paint exceeds regulatory limits for RCRA 8 materials and resulting debris can be classified as hazardous waste, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 30 Ea

BID ITEM NO. 2029

Lead based paint chips removal and disposal from Various Wood surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

BID ITEM NO. 2030

Lead based paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 2031

Lead based paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 2032

Lead based paint chips removal and disposal from various CMU surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 2033

Lead based paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 2034

Lead containing paint chips removal and disposal from Various Wood surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 4,500 S.F.

BID ITEM NO. 2035

Lead containing paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 2036

Lead containing paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 2037

Lead containing paint chips removal and disposal from various CMU surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 2038

Lead containing paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 2039

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Remove and replace existing gypsum board with lead-containing paint with new gypsum board, to match existing thickness, (1/2" or 5/8" thick), tape

BID ITEM NO. 2040

with new Plywood panels, to match existing thickness, (1/2" or 5/8" thk.), BID ITEM NO. 2041 nominal/minimal requirements: (40’-0” to 10” working height, 60”x30” platform size, 500 lb capacity aluminum platform and 23’-0” to 7.5” horizontal reach. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 40 WK

BID ITEM NO. 2042

Equipment Rental of telescopic forklift with 55’-0” lift height and 10,000 lbs lift capacity. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 3 WK

BID ITEM NO. 2043

Surface preparation using Shot Blasting to clean and prepare existing surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50 S.F.

BID ITEM NO. 2044

Contractor shall install high performance epoxy floor coating to include sand blast, sealant, four coats epoxy system and stenciling. Estimated at 100 S.F.

BID ITEM NO. 2045

Contractor shall move all furniture prior to painting and return furniture to original location after painting. (EA equals Cubic Feet) Estimated at 1,000 EA.

BID ITEM NO. 2046

Scaffolding, stairs, landings erection and dismantling. To include delivery to jobsite, erection, dismantling and return to rental company.

To include all incidental items required to complete the work. (EA equals Cubic Feet) Estimated at 500 EA.

BID ITEM NO. 2047

Scaffolding rental per month. To include scaffolding, stairs, landings bracing and all incidental items required to complete the work. (EA equals

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Cubic Feet. 100 CF rented for 2 months will be paid at 200 EA) Estimated at 500 EA.

BID ITEM NO. 2048

Non-Lead paint chips removal from various surfaces where excessive peeling is caused by latex paint over oil based paint. To include clean-

1.3.4 3rd Option ITEMS OF WORK

3rd Option Year Estimated quantities, item numbers, units of measure, unit prices and amounts are as follows:

BID ITEM NO. 3001

Pressure wash building exterior prior to painting. To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 3002

Two-coats exterior painting with two-coat masonry paint. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 400,000 S.F.

BID ITEM NO. 3003

Two-coats exterior painting of previously painted concrete steps, porches, and floors. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 3004

Two-coats exterior painting of wood surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50,000 S.F.

BID ITEM NO. 3005

Two-coats exterior painting of metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 3006

Two-coats exterior painting of galvanized surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 10,000 S.F.

BID ITEM NO. 3007

Replacement of exterior deteriorated surface lumber. To include clean-

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 at 100 B.F.

BID ITEM NO. 3008

Replacement of exterior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 3009

One-coat Exterior grade primer of bare or previously painted surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 3010

One-coat cement emulsion fill coat. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 3011

Non-Lead paint chips removal and disposal from various Wood surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 30,000 S.F.

BID ITEM NO. 3012

Non-Lead paint chips removal various Metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 5,000 S.F.

BID ITEM NO. 3013

Non-Lead paint chips removal and disposal from various Concrete surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 6,000 S.F.

BID ITEM NO. 3014

Non-Lead paint chips removal and disposal from various CMU surfaces.

BID ITEM NO. 3015

BID ITEM NO. 3016

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

BID ITEM NO. 3017

windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 200,000 S.F.

BID ITEM NO. 3018

Two-coats interior painting with gloss latex paint on wood, metal, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 3019

Two-coats interior painting with flat latex paint on wood, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 3020

Two-coats interior painting with flat latex paint on rough textured acoustical plaster ceilings. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 3021

Two-component Epoxy paint, with surface preparation, mixing, Epoxy base, and finish. To include clean-up, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 3022

Replacement of interior deteriorated surface lumber. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 B.F.

BID ITEM NO. 3023

Replacement of interior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 3024

Repair/replace drywall. Provide 1/2" or 5/8 gypsum wallboard (match

BID ITEM NO. 3025

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 work. Estimated at 150,000 S.F.

BID ITEM NO. 3026

Sample analysis: Collection and laboratory analysis to determine if paint contains lead and resulting debris can be classified as hazardous waste. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 10 Ea.

BID ITEM NO. 3027

Soil sample testing prior to and after work completion. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 5 Ea.

BID ITEM NO. 3028

Collection and laboratory analysis to determine if paint exceeds regulatory limits for RCRA 8 materials and resulting debris can be classified as hazardous waste, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 30 Ea

BID ITEM NO. 3029

Lead based paint chips removal and disposal from Various Wood surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 3030

Lead based paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 3031

Lead based paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 3032

Lead based paint chips removal and disposal from various CMU surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 3033

Lead based paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental

BID ITEM NO. 3034

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Lead containing paint chips removal and disposal from Various Wood items necessary to complete the work. Estimated at 4,500 S.F.

BID ITEM NO. 3035

Lead containing paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 3036

Lead containing paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 3037

Lead containing paint chips removal and disposal from various CMU surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 3038

Lead containing paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 3039

Remove and replace existing gypsum board with lead-containing paint with new gypsum board, to match existing thickness, (1/2" or 5/8" thick), tape

BID ITEM NO. 3040

with new Plywood panels, to match existing thickness, (1/2" or 5/8" thk.), BID ITEM NO. 3041 nominal/minimal requirements: (40’-0” to 10” working height, 60”x30” platform size, 500 lb capacity aluminum platform and 23’-0” to 7.5” horizontal reach. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 40 WK

BID ITEM NO. 3042

Equipment Rental of telescopic forklift with 55’-0” lift height and 10,000 lbs lift capacity. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 3 WK

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

BID ITEM NO. 3043

Surface preparation using Shot Blasting to clean and prepare existing surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50 S.F.

BID ITEM NO. 3044

Contractor shall install high performance epoxy floor coating to include sand blast, sealant, four coats epoxy system and stenciling. Estimated at 100 S.F.

BID ITEM NO. 3045

Contractor shall move all furniture prior to painting and return furniture to original location after painting. (EA equals Cubic Feet) Estimated at 1,000 EA.

BID ITEM NO. 3046

Scaffolding, stairs, landings erection and dismantling. To include delivery to jobsite, erection, dismantling and return to rental company.

To include all incidental items required to complete the work. (EA equals Cubic Feet) Estimated at 500 EA.

BID ITEM NO. 3047

Scaffolding rental per month. To include scaffolding, stairs, landings bracing and all incidental items required to complete the work. (EA equals Cubic Feet. 100 CF rented for 2 months will be paid at 200 EA) Estimated at 500 EA.

BID ITEM NO. 3048

Non-Lead paint chips removal from various surfaces where excessive peeling is caused by latex paint over oil based paint. To include clean-

1.3.5 4th Option ITEMS OF WORK

4th Option Year Estimated quantities, item numbers, units of measure, unit prices and amounts are as follows:

BID ITEM NO. 4001

Pressure wash building exterior prior to painting. To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 4002

Two-coats exterior painting with two-coat masonry paint. To include clean-up, and all incidental items necessary to complete the work.

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Estimated at 400,000 S.F.

BID ITEM NO. 4003

Two-coats exterior painting of previously painted concrete steps, porches, and floors. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 4004

Two-coats exterior painting of wood surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50,000 S.F.

BID ITEM NO. 4005

Two-coats exterior painting of metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 20,000 S.F.

BID ITEM NO. 4006

Two-coats exterior painting of galvanized surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 10,000 S.F.

BID ITEM NO. 4007

Replacement of exterior deteriorated surface lumber. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 B.F.

BID ITEM NO. 4008

Replacement of exterior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 4009

One-coat Exterior grade primer of bare or previously painted surfaces.

To include clean-up, and all incidental items necessary to complete the work. Estimated at 550,000 S.F.

BID ITEM NO. 4010

One-coat cement emulsion fill coat. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 4011

Non-Lead paint chips removal and disposal from various Wood surfaces.

work. Estimated at 30,000 S.F.

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

BID ITEM NO. 4012

Non-Lead paint chips removal various Metal surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 5,000 S.F.

BID ITEM NO. 4013

Non-Lead paint chips removal and disposal from various Concrete surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 6,000 S.F.

BID ITEM NO. 4014

Non-Lead paint chips removal and disposal from various CMU surfaces.

BID ITEM NO. 4015

BID ITEM NO. 4016

BID ITEM NO. 4017

windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 200,000 S.F.

BID ITEM NO. 4018

Two-coats interior painting with gloss latex paint on wood, metal, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 4019

Two-coats interior painting with flat latex paint on wood, concrete, fiberboard or gypsum board walls, ceilings, doors, and windows. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 4020

Two-coats interior painting with flat latex paint on rough textured acoustical plaster ceilings. To include clean-up, and all incidental

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23 items necessary to complete the work. Estimated at 100 S.F.

BID ITEM NO. 4021

Two-component Epoxy paint, with surface preparation, mixing, Epoxy base, and finish. To include clean-up, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 4022

Replacement of interior deteriorated surface lumber. To include clean-up, and all incidental items necessary to complete the work. Estimated at 100 B.F.

BID ITEM NO. 4023

Replacement of interior deteriorated structural lumber. To include clean-up, and all incidental items necessary to complete the work.

Estimated at 100 B.F.

BID ITEM NO. 4024

Repair/replace drywall. Provide 1/2" or 5/8 gypsum wallboard (match

BID ITEM NO. 4025

To include clean-up, and all incidental items necessary to complete the work. Estimated at 150,000 S.F.

BID ITEM NO. 4026

Sample analysis: Collection and laboratory analysis to determine if paint contains lead and resulting debris can be classified as hazardous waste. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 10 Ea.

BID ITEM NO. 4027

Soil sample testing prior to and after work completion. To include sampling, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 5 Ea.

BID ITEM NO. 4028

Collection and laboratory analysis to determine if paint exceeds regulatory limits for RCRA 8 materials and resulting debris can be classified as hazardous waste, testing, clean-up, and all incidental items necessary to complete the work. Estimated at 30 Ea

BID ITEM NO. 4029

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

Lead based paint chips removal and disposal from Various Wood surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 4030

Lead based paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 4031

Lead based paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 15,000 S.F.

BID ITEM NO. 4032

Lead based paint chips removal and disposal from various CMU surfaces.

To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 4033

Lead based paint chips removal and disposal from various drywall surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 4034

Lead containing paint chips removal and disposal from Various Wood surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 4,500 S.F.

BID ITEM NO. 4035

Lead containing paint chips removal and disposal from various Metal surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 4036

Lead containing paint chips removal and disposal from various Concrete surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 2,000 S.F.

BID ITEM NO. 4037

Lead containing paint chips removal and disposal from various CMU surfaces. To include clean-up, area air monitoring, and all incidental items necessary to complete the work. Estimated at 500 S.F.

BID ITEM NO. 4038

Lead containing paint chips removal and disposal from various drywall

Requirements‐Type Exterior/Interior Painting O/EPNTG FY’23

BID ITEM NO. 4039

Remove and replace existing gypsum board with lead-containing paint with new gypsum board, to match existing thickness, (1/2" or 5/8" thick), tape

BID ITEM NO. 4040

with new Plywood panels, to match existing thickness, (1/2" or 5/8" thk.), BID ITEM NO. 4041 nominal/minimal requirements: (40’-0” to 10” working height, 60”x30” platform size, 500 lb capacity aluminum platform and 23’-0” to 7.5” horizontal reach. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 40 WK

BID ITEM NO. 4042

Equipment Rental of telescopic forklift with 55’-0” lift height and 10,000 lbs lift capacity. To include delivery to jobsite location and return to Rental Company. (weekly rental) Estimated at 3 WK

BID ITEM NO. 4043

Surface preparation using Shot Blasting to clean and prepare existing surfaces. To include clean-up, and all incidental items necessary to complete the work. Estimated at 50 S.F.

BID ITEM NO. 4044

Contractor shall install high performance epoxy floor coating to include sand blast, sealant, four coats epoxy system and stenciling. Estimated at 100 S.F.

BID ITEM NO. 4045

Contractor shall move all furniture prior to painting and return furniture to original location after painting. (EA equals Cubic Feet) Estimated at 1,000 EA.

BID ITEM NO. 4046

Scaffolding, stairs, landings erection and dismantling.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .