Sub Doc L Rev E.pdf

This is a technical drawing and parts list for a U.S. Air Force Repair Kit, Field – Valve, Seven Port, MLG (landing gear). The document specifies component identification, procurement requirements, and assembly instructions for field repair operations.

The parts list identifies ten line items required for the repair kit, including washers, sealing rings, scrapers, springs, sealers, slippers, packing materials, and T-seals sourced primarily from Eaton Corporation (Aerospace Division) located in Los Angeles, California. Specific part numbers are provided using IAW MIL-STD-130 and SAE 47B-35 marking standards. The drawing was prepared in accordance with IAW ASME Y14.100 standards with dimensioning and tolerancing per IAW ASME Y14.5-2009. Distribution is limited to Department of Defense and U.S. DOD contractors only, and the document contains technical data restricted under the Arms Export Control Act (Title 22, U.S.C., 2751 et seq.). The document is classified as Critical Technology as of 2013/2028. The drawing is identified as document number 98747, revision B, with an effective date of 20112078, and indicates this is page 1 of 1 of the complete specification.