Statement of Work (SOW)_Metal Art.pdf

METAL ART

433D MXG ART UPGRADE

STATEMENT OF WORK (SOW)

1. PURPOSE

433d Maintenance Group (MXG) has a requirement to fabricate multiple metal art pieces to display within the Group and Squadron facilities. It is a total of six (6) different metal art insignias/emblems following the style and dimensions detailed within the SOW.

2. SCOPE

Contractor shall provide all equipment, tools, materials, supplies, labor, and other incidentals necessary to meet the requirements as stated in this SOW. All equipment, supplies, and materials provided shall be new and not refurbished. The contractor shall coordinate with the Government representative prior to initiating delivery of items.

3. DESCRIPTION OF WORK

a. Constructing six (6) different metal shields with the designated Maintenance Squadron and Group insignia to be displayed at each squadron. The design shape and color of each shield should resemble that of the included artwork for each squadron. The 60-inch and 42-inch shields will be displayed outside and should be made with material that can withstand the elements. The 30-inch and 20-inch shields will be displayed indoors. All items need to include the necessary items for wall-mounting and displaying the items.

b. The assigned Group or Squadron, size and general description of each item needed as followed:

433 MXG – 60-inch diameter shield made of aluminum, has powder coating and has wall-mounting hardware. Qty: 1 each

433 MXS, 433 AMXS – 42-inch diameter shield made of aluminum, has powder coating and has wall-mounting hardware. Qty: 2 each

433 MXG – 30-inch diameter shield made of stainless steel, has powder coating and has wall-mounting hardware. Qty: 1 each

433 MXS, 433 AMXS – 20-inch diameter shield made of stainless steel, has powder coating and has wall-mounting hardware. Qty: 2 each

4. METAL ART DESIGN

433d Maintenance Group (433 MXG) 433d Maintenance Squadron (433 MXS)

433d Aircraft Maintenance Squadron (433 AMXS)

5. CONTRACT MANAGEMENT

No changes or deviation from the scope of service shall be affected without a modification executed by the Contracting Officer authorizing changes.

6. INSPECTION AND ACCEPTANCE

Government representative will require a digital drawing via disk, email, etc. reflecting a preview of what the insignias will look like prior to initial production. Government representative will conduct the final inspection with the Contractor to determine whether the project can be accepted or if corrections are required prior to final acceptance.