Statement of Work Rotational Viscomeer.pdf
PDF 150 KB Posted
- Attached to
- ROTATIONAL PADDLE VISCOMETER-AASHTO T 382 COMPLIANT Federal contract opportunity
- Solicitation number
- 693C7325Q000032
About this file
This Statement of Work details the procurement of a rotational paddle viscometer for measuring emulsion viscosity compliance with specific AASHTO standards. The device must meet precise technical specifications, including a measurement range of 30mPa·s to 3000 mPa·s, microprocessor temperature control within ±0.1 Celsius, rotation capability of 100 revolutions per minute, and temperature maintenance between 25 and 90 Celsius.
The viscometer requires automated result determination, data collection capabilities, and calibration within 5% of viscosity standards. Electrical requirements mandate operation on standard U.S. 115V power systems. Service and support provisions include full manufacturer support for operations and wear parts, one training session on maintenance and operating procedures, supplier support via phone and email, and a one-year warranty. The equipment will be delivered to 1827 Jack Delozier Dr., Sevierville, TN 37876, with the pricing instruction to exclude taxes and tariff fees.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| RFQ NO. 693C7325Q000032-REVISED.pdf | ||
| RFQ NO. 693C7325Q000032.pdf | ||
| PROVISION 52.204-24.pdf | ||
| PROVISION 52.204-26.pdf | ||
| Sec 889 Offeror Representation Form.pdf | ||
| 52.204-27 Prohibition on a ByteDance Covered Application.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
This statement of work is for the purchase of a rotational paddle viscometer used to measure emulsion viscosity compliance from AASHTO M 140, AASHTO M 208 and AASHTO M 316 and tested in accordance with AASHTO T 382. The rotational paddle viscometer differs from a standard rotational viscometer in the ability to measure specimen temperature directly and paddle geometry.
Specification/Requirements
A. Rotational Paddle Viscometer Designed and meets AASHTO T 382 requirements to ensure compliance with AASHTO M 140, M208 and AASHTO M316 between temperatures of 25 Celsius to 90 Celsius.
• Measurement range form 30mPa·s to 3000 mPa·s
• Must have microprocessor circuity system controlling preset temperature to +/- 0.1
Celsius.
• Must have controlled rotation ability of 100 revolutions per minute.
• Must have ability to maintain controlled temperature of 25 Celsius and 50 Celsius and other ranges between 25 and 90 Celsius.
• Must have automated and consistent determination.
• Must have results automated and presented simplified by display with data collection ability.
• Must have ability to calibrate both temperature and standardize viscosity measure within 5% of viscosity standards S60 and S600.
• Must be delivered in factory working condition to address below
Address: 1827 Jack Delozier Dr., Sevierville, TN 37876
B. Electrical Requirements
1. Operate on standard U.S. power systems and 115V.
C: Service & Support
1. Equipment must be fully supported for operations and wear parts from manufacturer.
2. Must provide one session of describing maintenance and training of operating procedures.
3. The Cylinder Grinder supplier must be capable of support through phone, e-mail. Warranty for one year.
D: Do not include Taxes or Tariff fees in pricing.
File details come from the government source that posted it. Updated .