Statement of Work - Rollover Flexi Flatbed Applicator Table.pdf
PDF 108 KB Posted
- Solicitation number
- FA441826Q0099
About this file
This is a Statement of Work (SOW) for the procurement of one Rollover Flexi Flatbed Applicator table to support the 437th Maintenance Squadron at Joint Base Lindsey Graham, South Carolina. The equipment will be used by the Structural Maintenance Section to manufacture, align, and apply aircraft decals, tail flashes, and mandatory identification markings to the C-17 Globemaster III fleet. The contractor must deliver a fully operational flatbed applicator table meeting minimum specifications including a 5.1ft x 11.1ft size with height adjustment capability, optional heat assist roller (Model F3315), Rollover Contact Cleaner Starter Pack (12in), and Rollover Long Reach Cutter with 28–40 inch cleaning path width. The contractor is responsible for providing all equipment, materials, freight delivery, and on-site assembly/setup, along with operator manuals, maintenance documentation, and warranty documentation. No contractor-provided training is required as Government personnel are fully proficient in operating this equipment line.
Delivery and setup must be completed within 30 days of delivery at Building 515 (Corrosion Control Facility/Paint Shop), 201 N Bates Street, Joint Base Lindsey Graham, SC 29404. The Government will provide a standard 20 AMP 115V AC grounded electrical outlet and an active facility shop air line delivering 90–110 PSI of compressed air; the contractor is responsible for providing all hoses, power cables, and couplings necessary to connect the table to these utility points. Equipment acceptance will be based on successful delivery, operational verification, and receipt of required technical documentation, with inspection performed upon delivery to ensure compliance with specifications.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
Rollover Flexi Flatbed Applicator table
1. Objective
The objective of this acquisition is to procure one (1) Rollover Flexi Flatbed Applicator table to support the 437th Maintenance Squadron (437 MXS) Structural Maintenance Section in manufacturing, aligning, and applying aircraft decals, tail flashes, and mandatory identification markings to the C-17 Globemaster III strategic transport aircraft fleet.
2. Scope of Work
The contractor shall provide all equipment, materials, freight delivery, and on-site assembly/setup necessary to deliver a fully operational flatbed applicator table.
Since the Government’s operational personnel possess extensive direct experience and are fully proficient in operating this equipment line, contractor-provided training is not required.
3. Technical Requirements
The Rollover Flexi Flatbed Applicator table must meet the following minimum specifications:
• Size: 5.1ft x 11.1ft
• Model: Height Adjust
• Optional Heat Assist Roller (Factory Install):
• Rollover Heat Assisted Roller Flexi
• Model F3315
• Rollover Contact Cleaner: Rollover
• Contact Cleaner Starter Pack 12in
• Rollover Long Reach Cutter: Rollover Cleaning path width: 28–40 inches
4. Deliverables
• One Rollover Flexi Flatbed Applicator Table, meeting all specifications.
• Operator manual and maintenance documentation
• Warranty documentation
5. Period of Performance
The contractor shall complete delivery and set up within 30 days of delivery.
6. Place of Performance
The equipment shall be delivered, assembled, and set up at:
Building 515 (Corrosion Control Facility / Paint Shop)
201 N Bates St.
Joint Base Lindsey Graham, SC 29404
7. Acceptance Criteria
The Government facility will provide the following utility connections at the immediate installation site within Building 515:
• A standard 20 AMP 115V AC grounded electrical outlet.
• An active, integrated facility shop air line delivering 90 to 110 PSI of compressed air to power the pneumatic gantry lift mechanism.
The Contractor is responsible for providing all standard hoses, power cables, and couplings required to connect the delivered table to these Government-furnished utility points.
8. Acceptance Criteria
The equipment will be inspected upon delivery to ensure compliance with specifications. Acceptance will be based on successful equipment delivery, operational verification, and receipt of technical documentation provided.
File details come from the government source that posted it. Updated .