Statement of Work Grove Crane - 09D00158.docx

STATEMENT OF WORK FOR

REPAIR OF 2009 Grove 50T Crane

1. DESCRIPTION OF SERVICES. The contractor shall provide all management, tools, equipment, supplies, technical data, and labor necessary to test, tear down, quote (TD&Q), and complete required and authorized repairs on one (1) TMS700E model Grove 50T crane, Vehicle Identification Number (VIN) 476S700E59S229552. All work shall be accomplished at the contractor’s repair facility. Transportation to and from the repair facility will be performed by the 823 RED HORSE Squadron. All work shall be IAW (in accordance with) Grove specifications and all OSHA regulations. The contractor shall accomplish all tasks to meet the requirements of the Statement of Work (SOW).

1.1. The contractor shall perform the following actions or repair the listed parts:

· Perform any and all applicable software updates

· PTO (power take-off) mainline leak

· Repair/replace Output shaft flange gasket

· HYD (hydraulic) leak on swivel manifold

· Transmission fluid change

· Rear differential input shaft leak

· Repair/replace all inoperable turn signals

· Lift cycle seal

· Bell housing Plug

· Rebuild the swing valve

· Repair/replace hydraulic pump

· HYD hoses bulging

· Repair/replace rear differential gasket

· Boom inspection and lube

· Repair/replace drag link bushings

· Repair A/C (air conditioning)

· Perform proper clutch brake adjustments

· Perform an inspection to ensure no other repairs are required. If there are, the Contractor will provide a detailed report and quote.

1.1.2. The contractor shall provide and install only OEM (original equipment manufacturer) approved parts. Additionally, the contractor shall repair the unit IAW the manufacturer’s technical specifications.

1.1.3. The contractor shall, in strict accordance with the manufacturer’s technical data and approved procedures, perform an operator’s check after the repair is complete to determine if the unit is functioning IAW manufacturer’s specifications.

2. Deliverables.

2.1. Parts and Repair Documentation. The contractor shall provide to the customer written documentation identifying all repairs completed and any applicable warranties provided.

2.2. The 823d RED HORSE Squadron will deliver one (1) TMS700E model Grove 50T crane, Vehicle Identification Number (VIN) 476S700E59S229552 to the repair facility.

2.3. Upon acceptance of the repairs, the contractor will contact 823d RED HORSE Squadron Vehicle Management to coordinate the inspection of repairs and pick up the vehicle from the repair facility.

GENERAL INFORMATION

3.1. Physical Security. The contractor shall ensure no government-owned or controlled real or personal property is damaged during any service provided under the contract. The contractor will be responsible for the repair or replacement of any government property damaged by the contractor at no expense to the government.