Statement of Work FFA.docx
DOCX document 21 KB Posted
- Solicitation number
- W911PT25Q0023
About this file
This Statement of Work outlines annual maintenance requirements for three Watervliet Arsenal firetrucks (WV586, WV082, and WV085) for the Department of the Army Materiel Command. The maintenance tasks are being solicited under contract number W911PT25Q0023 as a sole source procurement with Firematic in Shirley, NY, though all responsible entities may submit quotes.
The SOW details specific preventative maintenance tasks for each vehicle, including chassis service (oil changes, filters, lubrication, brake adjustments), automatic transmission service, and complete pump service operating at 150psi. Additional requirements vary by vehicle - WV082 requires aerial service maintenance and TAK-4 inspection per Pierce checklist. All vehicles require Carwell Rust Inhibitive Treatment or similar protection. The contract includes an option for repairs beyond the specified preventative maintenance tasks. The work falls under Service Contract Labor Standards Wage Determination No. 2015-4143.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W911PT25Q0023.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CQL-M
Statement of Work
PR: 91028489
1. Purpose: Perform annual maintenance on WVA Firetrucks
2. PM Tasks: Perform annual maintenance for WV586
a. Chassis Service: Change oil and filters, fuel filters, coolant filters, grease and lube pump, chassis driveline, lube all doors and reels. Complete vehicle inspection with reports. Adjust brakes, check tire pressure, re-torque wheels, perform test drive and post trip inspection.
b. Automatic transmission service: Replace transmission filter and fluid.
c. Complete pump service: Inspect pump, valves, drains, and inlet screens. Change transfer case fluid, adjust pump packings, lubricate valves and levers, check oil bearing lubrication. Operate and recirculate pump at 150psi and inspect pump. Test relieve valve and/or electronic vernier throttle. Inspect all gauges and fluid levels. Inspect foam system(if so equipped).
d. Perform Carwell Rust Inhibitive Treatment or similar.
3. PM Task: Perform annual maintenance for WV082
a. Chassis Service: Change oil and filters, fuel filters, coolant filters, grease and lube pump, chassis driveline, lube all doors and reels. Complete vehicle inspection with reports. Adjust brakes, check tire pressure, re-torque wheels, perform test drive and post trip inspection.
b. Automatic transmission service: Replace transmission filter and fluid.
a. Complete pump service: Inspect pump, valves, drains, and inlet screens. Change transfer case fluid, adjust pump packings, lubricate valves and levers, check oil bearing lubrication. Operate and recirculate pump at 150psi and inspect pump. Test relieve valve and/or electronic vernier throttle. Inspect all gauges and fluid levels. Inspect foam system(if so equipped).
c. Aerial Service: Clean and lube slide-ways, guide pads, waterways, and lift cables. Grease all pivot points and swing bearing. Clean and lube outriggers and manual hydraulic levers and overrides. Visual inspection, change hydraulic filters, check and top off aerial hydraulic fluid. Adjust guide pads and cables.
d. TAK-4 Inspection: Perform complete TAK-4 inspection per checklist provided by Pierce
e. Perform Carwell Rust Inhibitive Treatment or similar.
4. PM Tasks: Perform annual maintenance for WV085
a. Chassis Service: Change oil and filters, fuel filters, coolant filters, grease and lube pump, chassis driveline, lube all doors and reels. Complete vehicle inspection with reports. Adjust brakes, check tire pressure, re-torque wheels, perform test drive and post trip inspection
b. Automatic transmission service: Replace transmission filter and fluid.
c. Complete pump service: Inspect pump, valves, drains, and inlet screens. Change transfer case fluid, adjust pump packings, lubricate valves and levers, check oil bearing lubrication. Operate and recirculate pump at 150psi and inspect pump. Test relieve valve and/or electronic vernier throttle. Inspect all gauges and fluid levels. Inspect foam system(if so equipped).
d. Perform Carwell Rust Inhibitive Treatment or similar
5. Option to perform any repairs of WV586, WV082, and WV085 above and beyond services listed in PM tasks.
File details come from the government source that posted it. Updated .