Statement of Work Dental Imaging.docx

STATEMENT OF WORK

INTRODUCTION: The purpose of this Statement of Work (SOW) is to outline the tasks and responsibilities of the vendor in supplying electrocardiogram machines for the newly constructed Antelope Valley CBOC within VISN22 under VA Greater Los Angeles Healthcare System.

BACKGROUND: The Antelope Valley CBOC is part of VA Greater Los Angeles Healthcare System. The new CBOC offers primary care, dental, women’s health, physical therapy, mental health, telehealth, and other specialty services. This new clinic has a requirement for new dental imaging systems.

PURPOSE: The dental imaging systems help dentists diagnose and treat oral health issues by providing a clear view of the inside of the mouth. These imaging systems helps in improving patient care within Antelope Valley CBOC.

SCOPE: VA GLA is requesting contractors provide brand name or equal that meet or exceed the physical, functional and performance of the listed salient characteristics in this section. The equipment feature is essential to the technical requirements to meet the need of the government.

PHYSICAL CHARACTERISTICS: Equipment must have the physical characteristics to enable the government to perform the capabilities:

X6505 – Radiographic Unit, Dental, Panographic – Dexis OP 3D

a) Dental Imaging OP 3D Pan Upgradable (2D Unit)

b) Fast Scan – 2D panoramic imaging in just 9 seconds

c) Standard and pediatric images, along with bitewing and lateral TMJ projections cover all the extraoral imaging

d) Bitewing-like view is a quick and easy alternative to intraoral bitewing imaging

e) Must be able to provide the optimum panoramic image layer automatically

f) Image volume: 5x5, 6x9, 9x11

g) Image detector: CMOS

h) Image voxel size: 80-400 micrometer (um)

i) Tube voltage: 95 kV

j) Tube current: 2-12.5mA

k) Easy wheelchair accessibility

l) The device meets the RoHS Directive 2011/65/EU

m) Dimension: 17.7”D x 39.2”W x 96.65”H

n) Quantity: 1

X6600 – Radiographic Unit, Dental, Wall Mounted – Dexis FOCUS IntraOral

a) Must include Generator Constant Potential High Voltage DC, 100-200kHz

b) Tube Voltage 60 or 70 kV

c) Tube Current 7 mA

d) Focal Spot 0.7 mm to IEC 60336

e) Total Filtration 2.0 mm AI (70kV)

f) Line Voltage 115 / 230 VAC +/- 10% 60/50HZ

g) Must have Exposure Time Range 0.02-3.2 seconds

h) Must have reach of 85 inches or 216 cm

i) Must have Beam Limiting Cone Dimensions

j) Round diameter 2.36 inches (60 mm), rectangular 1.38 x 1.77 inches (35 x 45 mm)

k) SSD (Source-Skin Distance): Standard cone 9 inches (229 mm), long cone 12 inches (305 mm)

l) Dimension: 85”D x 46”W x 47”H

m) Quantity: 3

X6610 – Sensor, Dental Imaging System – Dexis IXS Sensor

a) Must include size 1 (child) and size 2 (standard)

b) Thermoplastic resin coating

c) 2.5 m / 3 mm long Kevlar reinforced cable

d) Pixel size: 19.5 micrometer (um)

e) Number of pixels: Size 1 1.6M (1026 x 1539), size 2 2.4M (1324 x 1842)

f) Resolution: theoretical: 25.6 lp/mm Visible: 20+ lp/mm

g) Must have USB 2.0 port

h) Must be capable with most common image acquisition and clinic management software

i) Sloped dome housing, rounded corners and edges

j) Dimension: 1”D x 1.02”W x 1.42”H

k) Quantity: 3

FUNCTIONAL AND PERFORMANCE CHARACTERISTICS: Equipment must provide the functional and performance capability as listed above in section in above.

TRAINING: Contractor is to provide a one-time training at installation of equipment. Government will not require additional training.

WARRANTY OF EQUIPMENT: Government requirement for standard manufacturer industry warranty term. Government does not accept extended warranty, which requires advance payment.

PERFORMANCE:

· All items to be delivered and or installed after receipt of purchase order by 8/1/2025.

· Hours: Normal duty hours are 8:00 a.m. through 4:00 p.m., Monday through Friday, not including federal holidays. Whenever contact with a facility is required outside of normal duty hours, the Contractor shall coordinate these times with the designated COR, POC or designee.

· In accordance with 5 U.S.C. 6103, Executive Order 11582 and Public Law 94-97 the following national holidays are observed and for the purpose of this contract are defined as “Legal Federal official holidays”

· Noncontract Charges: The contractor shall not perform any service that will result in additional charges without prior approval from the Contracting Officer.

· Payment: Payment will be made upon receipt of a properly prepared invoice which references the period for which payment is due, the contract number and/or assigned purchase order number. The invoice must include the correct payment address.

· Waste Removal: The contractor is responsible to remove and properly dispose of all waste related to the services provide on-site at all VA facilities.

· Failure to carry out the above procedures will be considered as a failure to document the service visit and will constitute a failure to perform.

· All shipping for parts will be included in the cost of the contract.

PLACE OF DELIVERY: VA Antelope Valley CBOC 44439 17th St. W. Lancaster, CA 93534

SECURITY

Information Security

· The vendor shall ensure adequate LAN/Internet, data, information, and system security in accordance with VA standard operating procedures and standard contract language, conditions laws, and regulations. The vendor’s firewall and web server shall meet or exceed the government minimum requirements for security. All government data shall be protected behind an approved firewall. Any security violations or attempted violations shall be reported to the VA Project Manager and the VBA Headquarters Information Security Officer as soon as possible. The vendor shall follow all applicable VA policies and procedures governing information security, especially those that pertain to certification accreditation.

· The contractor shall follow The Veterans Affair Acquisition Regulation (VAAR) security clause VAAR- 852.273-75 “SECURITY REQUIREMENTS FOR UNCLASSIFIED INFORMATION TECHNOLOGY RESOURCES” sited in section C. Contract Clauses

(a) The contractor and their personnel shall be subject to the same Federal laws, regulations, standards and VA policies as VA personnel, regarding information and information system security. These include but are not limited to Federal Information Security Management Act (FISMA), Appendix III of OMB Circular A-130, and guidance and standards, available from the Department of Commerce's National Institute of Standards and Technology (NIST). This also includes the use of common security configurations available from NIST's Web site at: http://checklists.nist.gov

(b) To ensure that appropriate security controls are in place, Contractors must follow the procedures set forth in "VA Information and Information System Security/Privacy Requirements for IT Contracts" located at the following Web site: http://www.iprm.oit.va.gov

Contract Personnel Security All contractor employees who require access to the Department of Veterans Affairs' computer systems shall be the subject of a background investigation and must receive a favorable adjudication from the VA Security and Investigations Center (07C). The level of background security investigation will be in accordance with VA Directive 0710 dated September 10, 2004 and is available at: http://www.va.gov/pubs/asp/edsdirec.asp (VA Handbook 0710, Appendix A, Tables 1 - 3). Appropriate Background Investigation (BI) forms will be provided upon contract (or task order) award, and are to be completed and returned to the VA Security and Investigations Center (07C) within 30 days for processing. Contractors will be notified by 07C when the BI has been completed and adjudicated. These requirements are applicable to all subcontractor personnel requiring the same access. If the security clearance investigation is not completed prior to the start date of the contract, the employee may work on the contract while the security clearance is being processed, but the contractor will be responsible for the actions of those individuals they provide to perform work for the VA. In the event that damage arises from work performed by contractor personnel, under the auspices of the contract, the contractor will be responsible for resources necessary to remedy the incident.