Statement_of_Work_Amendment_0001_0001.pdf
PDF 447 KB Posted
- Attached to
- Cibola Unit 1 Pipe and Fittings Materials
- Solicitation number
- 140R4022Q0083
About this file
This document is a statement of work amendment for the Cibola Unit 1 Pipe and Fittings Materials procurement. The Bureau of Reclamation requires approximately 8,900 feet of 30-inch DR 32.5 IPS HDPE pipe along with associated fittings to be delivered by February 25, 2023 to a location approximately 18 miles south of Blythe, California. The specifications outline the requirements for the HDPE pipe and fittings to include material grade, joining system, dimensions, and delivery terms. The related federal contract opportunity is solicitation number 140R4022Q0083 for the Cibola Unit 1 Pipe and Fittings Materials being procured by the Department of Interior Bureau of Reclamation.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Purpose_of_Amendment_0001_0001.pdf | ||
| Combined_Synopsis_Solicitation.pdf | ||
| Attachment_1_Statement_of_Work.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Cibola Unit 1 Pipe HDPE Pipe and Fittings Specifications
Amendment 0001
Cibola Unit 1 HDPE Pipe and Fittings Materials Specifications
INTRODUCTION
The Bureau of Reclamation, Upper Colorado Region, requires HDPE piping and associated components as described in this specification.
LOCATION
Delivery location is near the Cibola National Wildlife Refuge (approximately 33.361403, - 114.696753). This site is located 18 miles south of Blythe, CA.
Cibola Unit 1 Pipe HDPE Pipe and Fittings Specifications
Amendment 0001
QUANTITIES
Quantity Item 8900 FT 30” DR 32.5 IPS HDPE Pipe 16 EA 30” X 2” IPS HDPE Electrofusion Saddle with HDPE to PVC outlet 16 EA 2” 3500 Air/Vacuum Relief Valve 16 EA 2” T11001-NL Brass Valve 32 EA 2”X6” Brass Nipple 16 EA “Tee” 30” x 24” x 30” 2 EA 30” flange with backer ring and bolts 16 EA 24” flange with backer ring and bolts 16 EA 24” Blind Flange
Contractor shall supply and deliver HDPE Pipe and Fittings and shall supply documentation ensuring compliance with these specifications.
1.01 HIGH DENSITY POLYETHYLENE (HDPE) PIPE
A. HDPE solid wall pipe having the following salient characteristics:
1. ASTM F 714, solid wall, Dimension Ratio as specified in the quantities table.
2. Material: PE 4710 polyethylene material conforming to ASTM D 3350, Cell
Classification 345464C or 345464E.
3. Pipe delivered in 50-foot segments.
B. Joining System: Butt fusion joints
C. Fittings, Reducers, and Couplings, Backing Rings, Bolts, Gaskets
1. Adapters, couplings, bends, and connections at structures and encasements:
Fabricated from HDPE unless otherwise specified.
2. HDPE fittings: In accordance with ASTM F 2206.
3. Material: Same as specified for pipe.
4. Manufacturer’s standard couplings.
5. Backing rings shall be ductile iron ASTM A536 Gr 65/45/12 – No surface finish required. Powder coated, hot dip galvanized, or painted is also acceptable.
6. Backing ring bolts, washers, and nuts shall be zinc plated.
7. Gaskets shall be TTMA Fiber as manufactured by JM Eagle, or equivalent.
2.01 DELIVERY
A. Supplier shall deliver pipe in 50-foot lengths. Supply couplers and fittings boxed and palleted where possible.
Tentative delivery date shall be Jan 3 – Feb 25, 2023. Please coordinate delivery with Ryan Proctor 801-669-1105.
All pipe and fittings are to be delivered F.O.B Destination to “Location” above.
File details come from the government source that posted it. Updated .