Stand Specifications.pdf
PDF 75 KB Posted
- Attached to
- C-5 Visor Scissor Stand Federal contract opportunity
- Solicitation number
- FA857125Q0015
About this file
This document contains detailed specifications for a C-5 Visor Scissor Stand, outlining three main components: the steel base, scissors lift mechanism, and aluminum platform. The steel base (30" x 180") requires steel tubing construction with four Aero casters, formed steel channel for scissor rollers, and four manual leveling jacks. The scissors lift section specifies a 120-volt hydraulic pump system with a 48" x 3" bore hydraulic cylinder, manual directional valves, counter balance valve, and v-groove rollers.
The aluminum platform specifications include an aluminum base frame, flooring, eight sliding 10" floor extensions, telescoping aluminum ladder with 3" rungs, and removable handrails. Several modifications to the original design are listed, including the removal of the ladder cage, addition of grab bars, padding for slide-outs, toe kick installation around the visor track, gates at the ladder end and center, electric reel with chains and tow bar, and a level bubble. This specification document appears to be part of solicitation FA857125Q0015 for two C-5 Visor Scissor Stands at Robins Air Force Base, being procured as a sole-source acquisition from ALLSTANDS, Inc.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Purchase Description (PD).pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
C-5 Visor Scissor Stand Specifications
Steel Base (30" x 180")
• Fabricate steel base using steel tubing
• Furnish and install (4) Aero( casters)
• Fabricate and install formed steel channel for the scissor rollers
• Furnish and install (4) manual leveling jacks that will slide out
Scissors Lift
• Fabricate and install steel scissor system using steel tubing, includes cross tubes as needed.
• Furnish and install steel bushings, and roller pins to insure a precision fit.
• Furnish and install a 120 volt hydraulic pump.
• Furnish and install (1) 48" x 3" bore hydraulic cylinder
• Furnish and install manual directional valves and counter balance valve to insure the stand will not bleed off and lower while in operation.
• Furnish and install v-groove rollers to operate the scissors mechanism.
Aluminum Platform
• Fabricate and install aluminum platform base frame to the scissors lift.
• Furnish and install aluminum flooring.
• Fabricate and install (8) sliding 10" floor extensions.
• Fabricate and install telescoping aluminum ladder with 3" rungs, at least 1 ½" spacing will be maintained on the ladders as a safety item.
• Fabricate ladder cage around the top section of ladder.
• Fabricate and install removable aluminum handrails for the platform.
Changes to original submitted design
• Delete ladder cage
• Add grab bars to ladder
• Add padding to slide-outs
• Add toe kick to cutout around visor track
• Add gates to the ladder end and the center to allow track to pass through
• Add electric reel, chains and tow bar
• Upgrade electric reel
• Add level bubble
File details come from the government source that posted it. Updated .