A2. EIC LLRF Phase Noise Analyzer SOW.pdf
PDF 261 KB Posted
- Attached to
- Phase Noise Analyzer
- Solicitation number
- SS_472468
- Issued by
-
Department of Energy Office of Science
About this file
This Statement of Work (SOW) from Brookhaven National Laboratory details requirements for a Phase Noise Analyzer for EIC RF Systems, to be procured for the U.S. Department of Energy. The technical requirements specify the analyzer must measure phase and amplitude noise for carrier frequencies from 1 MHz to 8 GHz, with carrier power range of -20 dBm to 25 dBm. Specific performance specifications include precise noise sensitivity measurements at various offset frequencies, with requirements for both absolute and additive noise measurements. All electrical components must be NRTL certified.
The deliverables include the phase noise analyzer with applicable software and licenses, a 24-month warranty extension, and 36 months of calibration coverage. The delivery schedule mandates that the unit meeting all requirements must be completed 7 weeks from the vendor's purchase order acknowledgement. The document is dated December 8, 2025, and is signed by Geetha Narayan, with the analyzer to be shipped to Brookhaven National Laboratory (BNL) and include initial setup support from the vendor.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
P.O. Box 5000
Upton, NY 11973-5000 managed by Brookhaven Science Associates for the U.S. Department of Energy
Date: December 8, 2025
Subject: Statement of Work (SOW) for EIC Phase Noise Analyzer
I. Scope
1. Provide a Phase Noise Analyzer suitable for measurement of phase and amplitude noise of low noise signals for EIC RF Systems.
II. Requirements
1. Must be capable of making additive and absolute phase and amplitude noise measurements for carrier frequencies in the range of 1 MHz to 8 GHz.
2. Must be capable of making additive and absolute phase and amplitude noise measurements for carrier power in the range of -20 dBm to 25 dBm.
3. Deliver specified absolute phase noise sensitivity for a 100 MHz carrier signal better than -174 dBc/Hz at a 1 MHz offset frequency and better than -94 dBc/Hz at a 1 Hz offset frequency (cross-correlation factor equal to 1).
4. Deliver specified absolute amplitude noise sensitivity for a 100 MHz carrier signal better than -164 dBc/Hz at a 1 MHz offset frequency and better than -100 dBc/Hz at a 1 Hz offset frequency (cross-correlation factor equal to 1).
5. Deliver specified additive phase noise sensitivity for a 100 MHz carrier signal better than
-154 dBc/Hz at a 1 MHz offset frequency and better than -117 dBc/Hz at a 1 Hz offset frequency (cross-correlation factor equal to 10).
6. Deliver specified additive amplitude noise sensitivity for a 100 MHz carrier signal better than -159 dBc/Hz at a 1 MHz offset frequency and better than -102 dBc/Hz at a 1 Hz offset frequency (cross-correlation factor equal to 10).
7. All electrical components shall be NRTL certified.
III. Shipping / Installation
1. Vendor will ship phase noise analyzer to BNL and provide initial setup support.
IV. Deliverables
1. A phase noise analyzer that meets the specifications herein with applicable software and licenses.
2. Warranty extension by 24 months
3. Calibration coverage for 36 months
V. Schedule
1. Delivery of Phase noise analyzer unit that meets requirements shall be completed 7 weeks from the vendor’s acknowledgement of purchase order.
Signature: ______Geetha Narayan____12/8/2025_______
Of Requestor or Technical Rep
File details come from the government source that posted it. Updated .