SS TAPE 6-15-26_Redacted.pdf
PDF 179 KB Posted
- Attached to
- PRESSURE SENSITIVE TAPE
- Solicitation number
- SPMYM226Q7936
About this file
This is a Justification for Sole Source Procurement document for a contract under $150,000, referencing FAR 13.106 and NAVSUP 4200.85D Chapter 5.
The government seeks to procure pressure sensitive tape, 2 inches wide by 60 yards long, in white color with a temperature range of -65 to 450 degrees Fahrenheit. The tape features a glass overall and cotton construction with cold, heat, and solvent resistance properties. Part number is 361 (2-inch rolls), and each roll must be marked with manufacturer and part number. The required delivery date is August 10, 2026. The sole source manufacturer is 3M Company, located at 3M Corporate Headquarters, St. Paul, Minnesota 55144-1000, with manufacturer point of contact at 1-888-364-3577. The authorized dealer/representative is PLUSSTAR, INC., located at 2650 Nova Drive, Dallas, Texas 75229, reachable at 1-877-389-6637.
The justification cites proprietary silicone adhesive coating technology as the basis for sole source restriction. The tape withstands intermittent temperatures up to 550 degrees Fahrenheit, provides adhesion to steel of 38 ounces per inch width, tensile strength of 146 pounds per inch width, backing thickness of 5.0 mils, and total tape thickness of 6.4 mils. The document confirms this is the only tape approved for use with hotwork operations at Puget Sound Naval Shipyard (PSNS) and has been approved by C/106 for hot work area applications. Any substitute material requires specific approval by C/106.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SS TAPE 7-7-26_Redacted.pdf | ||
| Solicitation SPMYM226Q7936.pdf | ||
| SS TAPE 6-23-26_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JUSTIFICATION FOR SOLE SOURCE (SAP <$150k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)
The service or material listed on (Document number) __6163-7904___ is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.
Restricted to the following source or brand name. Provide original manufacturer's name.
(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)
Manufacturer: _____ _______________________________________________________ Manufacturer POC & Phone Nr. ___ 1-888-364-3577_______________
Mfr. Address_______3M Corporate Headquarters, 3M Center St. Paul, MN 55144-1000______ Manufacturers Dealer/Rep: PLUSSTAR, INC._____________ Dealer/Rep Address/Phone Number_2650 Nova Drive Dallas, Texas 75229__1-_877-389-
6637_______
__X__ Description of the item or service required, the estimated cost, and required delivery date.
____PRESSURE SENSITIVE TAPE, 2" WD X 60 YD LG, COLOR WHITE, TEMP RANGE -65 TO 450 DEG F GLASS OVERALL & COTTEN, COLD, HEAT & SOLVENT RESISTANT. PART NUMBER:361 (2 IN. ROLLS) (EA ROLL MUST BE MARKED W/MFR & PART#) Any other substitute must be approved by C/106 for use in hot work areas. Required Delivery Date: 8-10-26___________
__X__ Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).
Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.
__Tape is coated with a silicone adhesive for many applications requiring high temperature resistance, high adhesion and a very strong, abrasion- resistant backing. Can withstand intermittent temperatures up to 550°F (288°C) or higher, depending upon the type and duration of the heat source. Adhesion to Steel:38 oz./in. width. Tensile Strength:
146 lbs./in. width. Elongation at Break:9%. Backing Thickness:5.0 mils. Total Tape Thickness: 6.4 mils. Temperature Use Range: -65° to 450°F (-54° to 232°C) Each roll is marked with MFR & PART number for reference. This tape is the only one approved for use with HOTWORK in PSNS and approved by C/106 for use. __________________
_X_ The requested material or service represents the minimum requirements of the government
CHECK & FILL IN ALL APPLICABLE BLANKS BELOW
____The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Just Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.
__X__A patent, copyright, or proprietary data limits competition. The proprietary data is:
___Tape is coated with a silicone adhesive for many applications requiring high temperature resistance, high adhesion and a very strong, abrasion- resistant backing. Can withstand intermittent temperatures up to 550°F (288°C) or higher, depending upon the type and duration of the heat source. Adhesion to Steel:38 oz./in. width. Tensile Strength:
146 lbs./in. width. Elongation at Break:9%. Backing Thickness:5.0 mils. Total Tape Thickness: 6.4 mils. Temperature Use Range: -65° to 450°F (-54° to 232°C) Each roll is marked with MFR & PART number for reference__________________________________________________________________________________ for existing brand name equipment.
____Other information to support a sole-source buy:
File details come from the government source that posted it. Updated .