DI_MGMT_81804A_IUID_Marking_Activity_Report.pdf

Data Item Description Rev. A PDF 83 KB Posted

Attached to
Surplus acqusition of the Mode Select in support of the C-130 Aircraft
Solicitation number
SPRWA1-18-Q-0031
Issued by

About this file

From the source

DID - DI-MGMT-81804A - IUID Marking Activity & Verification Report

View the file

Other versions and copies of DI-MGMT-81804A

12 government files on GovTribe name DI-MGMT-81804A. Different revisions are separate documents; copies of this exact file point search engines to its first posting.

File Revision Posted Attached to
A007 CDRL DI-MGMT-81804A IUID Marking Activity and Verification Report _FD20602400023 (2).pdf Rev. A SYPNOPSIS/SOLICITATION -C-5 Hydraulic Winches-Remanufacture
Exhibit 11 DI-MGMT-81804A.pdf Rev. A Repair Inertial Measurement Unit & Attitude Motion Sensor Set for the B-2
A006 DI-MGMT-81804A IUID Marking.pdf Rev. A NP2000-EPCS Propeller Repair
A006 DI-MGMT-81804A IUID Marking FD2060-20-30513.pdf Rev. A DRAFT RFP* NP2000 Propeller Component Repair *DRAFT RFP*
DI-MGMT-81804A___CDRL_D00F_ITEM_UNIQUE_IDENTIFICATION_DATA_(IUID)_PACKAGE_(3.4.5).pdf Rev. A Intelligent Power Distribution Panels
DI_MGMT_81804A_IUID_Marking_Activity_Report.pdf Same revision and size as this file Rev. A Multiple Indicator spares in support of the C-130 H3 and HC-130N Aircraft
FA810514R0009_A002_DI_MGMT_81804A_IUID_Verification_Report.pdf Rev. A Block 45 Full Rate Production Group A Kit Procurement
A002_DI_MGMT_81804A_IUID_Verification_Report.pdf Rev. A Block 45 Full Rate Production Group A Kit Procurement
A19_DIMGMT_81804.pdf Revision not stated Design, Build and Deliver Three (3) Universal Fuel Control Test Stands
FA810514R0009_Di_MGMT_81804_CDRL_A002.pdf Revision not stated Block 45 Full Rate Production Group A Kit Procurement
CDRL_A010_DI-MGMT-81804.pdf Revision not stated Automatic Hydraulic Test Stands -- F16 EHSV/ISA TEST STANDS
Show all 11

Who attaches DI-MGMT-81804A

Agency Files
Department of the Air Force Materiel Command Lifecycle Management Center Tinker Air Force Base 5
Department of the Air Force Materiel Command Air Force Sustainment Center 2
Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base 2
Department of the Air Force Materiel Command Lifecycle Management Center Robins Air Force Base 2
United States Marine Corps 1

Other files

File Type Posted
DI_MGMT_81803_Marking_Plan.pdf PDF
Form_158.pdf PDF
Form_1653_02.pdf PDF
SPRWA1-18-Q-0031.pdf PDF
IUID_Checklist.pdf PDF
A003_IUID_Marking_Activity_Verification_Report.pdf PDF
Form_813.pdf PDF
A002_IUID_Marking_Plan.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DI-MGMT-81804A

DATA ITEM DESCRIPTION

Title: Item Unique Identification (IUID) Marking Activity, Validation and Verification Report

Number: DI-MGMT-81804A Approval Date: 20130212

AMSC Number: F9335 Limitation: N/A

DTIC Applicable: No GIDEP Applicable: No

Office of Primary Responsibility: 70 (OO-ALC) Applicable Forms: N/A

Use/relationship: The Item Unique Identification (IUID) Marking Activity, Validation and

Verification Report is a tabular list providing IUID marking activity, validation and verification data such as: physical asset marking, registration, inventory audits, quality audits, and verification/validation results.

This Data Item Description (DID) contains format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID may be applied in any contract which contains a requirement for marking parts and equipment with IUID encoded in data matrix symbols.

Requirements:

1. Reference document: MIL-STD-130. The applicable issue of MIL-STD-130 shall be the latest version cited online at Acquisition Streamlining and Standardization Information System

(ASSIST) Update, at the time of the solicitation. Other documents referenced in MIL-STD-130 shall also be applied.

2. The Contractor’s format is acceptable. Recommend electronic transfer of information.

3. A representative sample of IUID-related data matrix marks on items in each delivered

Contract Line Item Number/Sub-Contract Line Item Number/Exhibit Line Item Number

(CLIN/SLIN/ELIN) shall be validated and verified. Verification and validation results shall be provided using this report format. Marks failing verification or validation must be replaced with compliant marks prior to government acceptance of the items.

4. The tabular report shall include the following alphanumeric fields:

4.1 Unique Item Identifier (UII).

4.2 UII Type (Construct).

4.3 Enterprise Identifier (EID).

4.4 EID Type (CAGE/NCAGE, DUNS, etc).

4.5 Original Equipment Manufacturer (OEM) Part Number.

Downloaded from http://www.everyspec.com

DI-MGMT-81804A

4.6 Service Assigned Serial Number (if assigned).

4.7 Original Equipment Manufacturer (OEM) serial number.

4.8 Equipment Nomenclature (name and type).

4.9 National Stock Number (NSN).

4.10 Validation Date.

4.11 Validation Result (Pass/Fail).

4.12 Verification Date.

4.13 Verification Result (Pass/Fail).

4.14 Other Event/Activity Date* (optional).

4.15 Other Event/Activity* (optional).

4.16 For items marked that “Fail” IUID validation or verification, identify corrective action

(whether the item has been re-marked or scrapped).

*Other Event/Activity will be defined in the Contract Data Requirements Lists (CDRLS) if required.

5. The Key attributes for the report are the validation and verification columns which each indicate (Pass/Fail). (NOTE: Most verification apparatus provide electronic records with pass/fail summaries for both verification and validation.)

A “Pass” validation value shall be assigned to records whose data matrix symbol(s) properly encode Item Unique Identification data as prescribed in MIL-STD-130 DoD Standard Practice

Identification Marking of U.S. Military Property requirements for machine readable information

(MRI) marking.

A “Pass” verification value shall be assigned to records whose data matrix symbol(s) meet or exceed MIL-STD-130 DoD Standard Practice Identification Marking of U.S. Military Property requirements for data matrix symbol quality.

6. The Contractor shall ensure machine-readable IUID marks required under this contract are permanently placed on the items subjected to contractually-required performance testing prior to that testing; and further shall include all mark serviceability problems in the item’s test report(s).

7. End of DI-MGMT-81804A.

Downloaded from http://www.everyspec.com

File details come from the government source that posted it.