letter_RFP_SPRTA1-19-R-0174_Amendment_0001_PR_19-00927.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

AF IMT 3925, 20030819, V1 REPLACES AF FORM 2600, 19940701, WHICH IS OBSOLETE

ENGINEERING ORDER

1. ENGINEERING ORDER NO.

DATE: PAGE OF PAGES

2. DWG TITLE

3. DWG CAGE CODE

4. DWG NO.

5. NEXT ASSY 6. USED ON

7. OPR CAGE CODE

98748

DWG SIZE

DWG SHEET(S)

LATEST DWG REV LTR

8. TYPE OF ENGINEERING ORDER 9. REASONS FOR CHANGE 11. DOCUMENTS AFFECTED (TO/TCTO/SPEC/OTHER)

14. CORROSION CONT. MON. SYMBOL DATE

ADVANCE CHANGE ERROR CORRECTION

DEVIATION AUTHORIZED DESIGN CHANGE 15. NDI SYMBOL DATE

CHANGE NOTICE DRAWING CLARIFICATION

INFORMATION UPDATE DRAWING 12. EO PREPARED/REQUESTED BY

SYMBOL

DATE 16. SYMBOL DATE

10. DISPOSITION OF SPARES OTHER COMMENTS

This EO adds Item Unique Identification (IUID) requirements to the drawing

DRC Contract

PHONE

17. DWG CHANGED BY SYMBOL DATE

REWORK

MODIFY 13. ENGINEERING APPROVAL SYMBOL DATE 18. CHANGE CHECKED BY SYMBOL DATE

SCRAP

REPLACE PHONE 19. EO/DWG RELEASED BY SYMBOL DATE

20. DESCRIPTION OF CHANGES/REMARKS

gregory hite

Sticky Note

Marked set by gregory hite

AF IMT 3926, 20030819, V1 REPLACES AF FORM 2601, 19940701, WHICH IS OBSOLETE

ENGINEERING ORDER

(Continuation Sheet)

2. DWG TITLE

3. DWG CAGE CODE

4. DWG NO.

5. DESCRIPTION OF CHANGES/REMARKS

ENGINEERING ORDER - PARTS LIST CHANGES

AF IMT 3927, 20030819, V1 REPLACES AF FORM 2601, 19940701, WHICH IS OBSOLETE

2. DWG TITLE 3. DWG CAGE CODE 4. DWG NO.

Exception to 3927 for CAD generation approved by HQ AFMC/ENP (AutoCAD)

PARTS LIST CHANGE

ACTION SYM NOMENCLATURE CAGE

CODE IDENTIFYING NO. MATERIAL/SPECIFICATION ZONE FIND

NO.

QTY REQ PER DASH NO

gregory hite

New Stamp

ACTION:

8:

3:

9:

3:

0:

3: ADD

1:

3: ADD

2:

3:

3:

3:

4:

3:

5:

3:

6:

3:

7:

3:

DATE_4: 2012-06-07

DWG CAGE CODE: 99167

DATE_6:

DATE_9: 7June2012

NOMENCLATURE:

8:

3:

9:

3:

0:

3: PLATE, Identification

1:

3: UID Label (Alternate)

2:

3:

3:

3:

4:

3:

5:

3:

6:

3:

7:

3:

QTY REQ 2:

3: B

2012-06-07T14:15:57-0500

ELDEN.MARK.E.JR.1228787902

DATE_2:

DWG NO: 739827

QTY REC 2 Row:

8:

3:

9:

3:

0:

3: 1

1:

3: 1

2:

3:

3:

3:

4:

3:

5:

3:

6:

3:

7:

3:

QTY REC 1 Row:

8:

3:

9:

3:

0:

3: 1

1:

3: 1

2:

3:

3:

3:

4:

3:

5:

3:

6:

3:

7:

3:

NDI:

Check Box10: Off

SYMBOL: 422

SCMS

DOCS AFFECTED: 9H6-5-14-3

9H6-5-14-4

QTY REQ 3:

3:

DESCRIPTION OF CHANGES/REMARKS CONT:

QTY REQ 1:

3: A

2012-06-07T13:33:38-0500

CORTEZ.ADOLFO.JR.1384345812

DWG SIZE: N/A

SYMBOL_8: 422 SCMS

LATEST DWG REV LTR: N/A

Check Box5: Yes

Check Box14: Off

Check Box7: Off

2012-06-07T14:16:11-0500

ELDEN.MARK.E.JR.1228787902

DWG SHEETS: N/A

CAGE CODE:

8:

3:

9:

3:

0:

3: 98748

1:

3: 98747

2:

3:

3:

3:

4:

3:

5:

3:

6:

3:

7:

3:

ENG ORD NO: 2012C1479-T

Check Box13: Off

DWG TITLE: CONSTANT SPEED DRIVE

TOTAL PAGES: 3

Check Box9: Off

DATE_5:

DATE_7: 7June2012

NEXT ASSY:

SYMBOL_2:

PHONE_2: (405) 734-8274

Check Box12: Off

SYMBOL_5:

PHONE: (405) 734-8273

SYMBOL_4:

SYMBOL_7:

USED ON: F-15 Aircraft

Check Box11: Yes

IDENTIFYING NO:

8:

3:

9:

3:

0:

3: 200945069-93

1:

3: 200733803-51

2:

3:

3:

3:

4:

3:

5:

3:

6:

3:

7:

3:

Check Box16: Off

Check Box19: Off

PAGE NO 2:

2: 2

PAGE NO 3:

3: 3

QTY REC 3 Row:

8:

3:

9:

3:

0:

3:

1:

3:

2:

3:

3:

3:

4:

3:

5:

3:

6:

3:

7:

3:

EO DATE: 2011-11-16

Check Box6: Off

Check Box15: Off

DESCRIPTION OF CHANGES/REMARKS: This EO supersedes any IUID related EO dated prior to 16 Nov 2011

- F-15 Aircraft Constant Speed Drive (PN 739827A and 739827B) shall be marked with a Unique Item Identifier (UII). (REF: MIL-STD-130)

- If no UID plate is present, fabricate new UID plate (200945069-93) and attach to the end item in the same location as the existing identification plate/label, using original type fasteners.

- New UID plate will be located on the end item as shown in sketch/photo on page 2, AF form 3926.

(UID Label P/N 200733803-51 is an acceptable alternate part)

Check Box18: Off

EO PREPARED/REQUESTED BY: Aoldo Cortez Jr

PAGE NO: 1

CORROSION CONT MON:

SYMBOL_3:

MATERIALSPECIFICATION:

8:

3:

9:

3:

0:

3: PV6 tesa® Secure™ tape or equivalent

1:

3: PV6 tesa® Secure™ tape or equivalent

2:

3:

3:

3:

4:

3:

5:

3:

6:

3:

7:

3:

DATE_8:

Check Box8: Off

SYMBOL_6: 422SCMS

DATE_3:

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20301900927-00 VERSION: 1

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAA MIL-STD-2073-1 / SPI MIL B F000722292 E 98209 - 28 JUL 1998

ITEM(S):

1650013134227

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

LENGTH

WIDTH

DEPTH

CUBE OPI

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

CAP AND PLUG IAW NAS 847.

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Bar code format shall conform to bar code symbology Format 3 of 9, Code 39 as specified in MIL- STD-129. (c.) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

Strain, Verlisher M

PHONE NUMBER:

405-582-9761 / 852-9761

SIGNATURE:

//SIGNED//Strain, Verlisher M

DATE:

18303 - 30 OCT 2018

Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 10 Jan 2019

TRANSPORTATION DATA FOR SOLICITATIONS

COMMODITY: See Continuation

PURCHASE INSTRUMENT NUMBER:

FD20301900927-00

DATE INITIATED:

20 DEC 2018

STOCK NUMBER: See Continuation

X ORIGIN DESTINATION OTHER DATA / FIRST ARTICLE F.O.B. DESTINATION(Specify)

F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT

TRANSPORTATION PROVISIONS / CLAUSES FAR CITATION

F.O.B. Origin 52.247-29 F.O.B. Origin - Prepaid Freight Shipment(s) shall be made with freight transportation costs prepaid by the Contractor, who shall verify with the freight shipment company that rates for this/these shipment(s) are equal to or lower than those used for U.S. Government shipments. If rates are not equal to or lower than those for Government shipments, contact the Contracting Officer for additional instructions. Shipping charges are to be shown as a separate item on the payment invoice. If the charges are $100 or more, a copy of the freight charges invoice must be attached to the payment invoice. Failure to properly annotate the invoice and provide a copy of the carrier's bill may result in those costs being disallowed.

Vendor Transportation Instructions

Freight Classification Description 52.247-53 Evidence of Shipment FMS 352.225-U037U Contact DCMA Transportation Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System, at http://www.dcma.mil <http://www.dcma.mil/> for ALL FOB:

Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil. If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated. Failure to contact the responsible DCMA may result in vendor incurring additional expenditures.

Vendor Transportation Instructions

IAW Basic Contract 9711X8242.0002 4FX 475W CSAPSR 000000 00000 0

Note to Contractor: Contact CTO if problems arise. Ship Door-to-Door commercial express carrier service for movement of MICAP and project codes (TP-1 and TP-2/RDD 777): 122, 123, 700, 780 (With restrictions), 879, 880, 9FF, 9FV, 9FX, 9GF, 9GJ, 9GV, 9GS, 9GD, Surge and 720.

TACRN:

AAA

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 9711X8242.0002 4FX 475W CSAPSR 000000 00000 035000 503000 F03000 FSR: 053261 PSR: C60431

First Destination Transportation Account Code:

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA: 9711X8242.0002 4FX 475W CSAPSR 000000 00000 0

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 1650013134227

Purchase Instrument Line Item Number: 0001

Ship to (DoDAAC / MAPAC): DSR004

Mark For: DSRA00

Ship To (Address):

WPOD:

APOD:

BBP / CCP:

RIC:

Requisition Number: DSRA5482830008

Supplemental Address: DA4SAP

FMS Case: SAP

Ship To (Remarks):

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

Page 1 of 2DD FORM 1653 Version 2Generated by PRPS using Jasper Reports on 10 Jan 2019

OTHER TRANSPORTATION DATA:

NAME

Carter, Glenn A

ORGANIZATION / OFFICE

SYMBOL

406 SCMS / GULAA

COMMERCIAL / DSN

PHONE

478-327-7399 / 497-7399

SIGNATURE

//SIGNED//Carter, Glenn A

DATE

20 DEC 2018

Page 2 of 2DD FORM 1653 Version 2Generated by PRPS using Jasper Reports on 10 Jan 2019

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (ii) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

1650013134227

VERSION NUMBER

NOUN

DRIVE,CONSTANT SPEE

INITIATOR

Frazier, Joseph H

ORGANIZATION CODE / OFFICE SYMBOL

422 SCMS / GUEA

COMMERCIAL PHONE

405-734-8274

DSN PHONE

884-8274

CAGE / REFERENCE NUMBER

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Engineering Drawing / ECP / ECO

ENGINEERING DRAWING / ECP / ECO NUMBER

2012C1479-T

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

Norman, Richard GNAME: 20 MAR 2015DATE:

Reference IUID plate per drawing excerpt 200945069-93 or tape per drawing excerpt 200733803-51

ATTACHMENT(S)

739827_2012C1479-T.pdf

F15E CSD IUID.pdf

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

CAGE / REFERENCE NUMBER

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 1650013134227

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 10 Jan 2019

A

B

C

D

7 6 5

E

F

G

H

8 67 5

4 3 2 1

4 23

TREATMENT

FINISH

.XX

.XXX

.03

.005 1°

NEXT ASSEMBLY

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON:

FRACTIONS DECIMALS ANGLES

SIZE

USED ON

REV

REVISION STATUS OF SHEETS

SHEET NO.

REVISION

DESCRIPTION DATE APPROVED

REVISIONS

CAGE CODE DWG NO.

98747E 200733803

SCALE: NOTED SHEET: 1 OF 5EF (AUTOCAD 2004)

DATEDFTSMN 510 CBSS/GBHAC

CHECKER 510 CBSS/GBHAC

ROBERT BATEMAN

MATL. ENGR. 809 MXSS/MSDEA

WELDON BETTS

PROJ. ENGR. 518 CBSS/GBMLAR

NATHAN HOWARD

CONTRACT NO.

PROJ. AUTH. 518 CBSS/GBMLAR

LOUIS HOGGE

RELEASE 510 CBSS/GBHAC

RICK HARRISON

TITLE

LABEL, UNIQUE

IDENTIFICATION (UID)

APPLICATION

CURRENT

CAGE CO.

U. S. AIR FORCE

W

N

O

R

V

AIRCRAFT

DDBA

A A SEE EO NO. 07A1051 070718 RICK

HARRISON

B SEE EO NO. 08A1414

DISTRIBUTION STATEMENT D:

DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL TECHNOLOGY; (24 APRIL 2007).

REFER OTHER REQUESTS FOR THIS DOCUMENT TO 416 SCMS/EN, HILL AFB, UT 84056.

WARNING

THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.). OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C., APP. 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DoD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENT OR RECONSTRUCTION OF THE DOCUMENT.

PARTS LISTQUANTITY REQUIRED PER DASH NO.

NOMENCLATURE CAGE CODE IDENTIFYING NO. MATERIAL/SPECIFICATION HCI ZONE FIND

NO.

LABEL, UID, RECTANGLE, LARGE 98747 -01 SEE TABLE 1 3 7E

LABEL, UID, RECTANGLE, LONG 98747 -03 SEE TABLE 1 3 7B

LABEL, UID, RECTANGLE, SMALL 98747 -05 SEE TABLE 1 3 4E

LABEL, UID, DISK 98747 -07 SEE TABLE 1 2 7D

LABEL, UID, DISK 98747 -11 SEE TABLE 1 2 7D

LABEL, UID, SUPPLEMENTAL DATAMATRIX 98747 -13 SEE TABLE 1 3 4B

LABEL, UID, SUPPLEMENTAL DATAMATRIX 98747 -15 SEE TABLE 1 3 4B

LABEL, UID, RECTANGLE, MRI ONLY 98747 -17 SEE TABLE 1 4 6E

LABEL, UID, RECTANGLE, MRI ONLY 98747 -19 SEE TABLE 1

LABEL, UID, RECTANGLE, MRI ONLY 98747 -21 SEE TABLE 1

LABEL, UID, RECTANGLE, MRI ONLY 98747 -23 SEE TABLE 1

LABEL, UID, RECTANGLE, MRI ONLY 98747 -25 SEE TABLE 1

LABEL, UID, RECTANGLE, MRI ONLY 98747 -27 SEE TABLE 1

LABEL, UID, SQUARE, MRI ONLY 98747 -31 SEE TABLE 1

LABEL, UID, SQUARE, MRI ONLY 98747 -33 SEE TABLE 1

LABEL, UID, SQUARE, MRI ONLY 98747 -35 SEE TABLE 1

LABEL, UID, SQUARE, MRI ONLY 98747 -37 SEE TABLE 1

LABEL, UID, SQUARE, MRI ONLY 98747 -39 SEE TABLE 1

LABEL, UID, DISK, MRI ONLY 98747 -41 SEE TABLE 1

LABEL, UID, DISK, MRI ONLY 98747 -43 SEE TABLE 1

LABEL, UID, DISK, MRI ONLY 98747 -45 SEE TABLE 1

LABEL, UID, DISK, MRI ONLY 98747 -47 SEE TABLE 1

LABEL, UID, OVERHAUL DATE 98747 -51 SEE TABLE 1

LABEL, UID, NATIONAL STOCK NUMBER 98747 -53 SEE TABLE 1

NOTES:

1. DRAWING PREPARED IAW ASME Y14.100 INCLUDING APPENDICES B THRU E.

2. INTERPRET DIMENSIONING AND TOLERANCES IAW ASME Y14.5M-1994.

3. IDENTIFY WITH PART NUMBER IAW MIL-STD-130; RUBBER STAMP ON BACK OF

LABEL USING INK AA56031-IIBLK.

4. MACHINE READABLE INFORMATION (MRI) SYMBOL, SYNTAX AND SEMANTICS REQUIREMENTS SHALL BE PER MIL-STD-130.

MRI SHALL FIT WITHIN AREA MARKED ON DRAWING AND MEET ALL READABILITY REQUIREMENTS PER MIL-STD-130.

MAINTAIN MINIMUM .030 QUIET ZONE AROUND DATA MATRIX FROM LABEL EDGE OR FREE TEXT.

PREFERRED

UNIQUE ITEM IDENTIFIER (UII) SHALL BE CONSTRUCT 1 WITH DATA IDENTIFIER 18S. MRI WILL ONLY CONSIST OF THE CAGE CODE AND SEQUENCING CODE. CAGE CODE IS THAT OF THE ACTIVITY RESPONSIBLE FOR GUARANTEEING UNIQUENESS OF THE SEQUENCING CODE AND SEQUENCING CODE SHALL BE A 6-CHARACTER ALPHANUMERIC STRING.

ALTERNATIVE

UNIQUE ITEM IDENTIFIER (UII) SHALL BE CONSTRUCT 2 WITH DATA IDENTIFIER 17V. MRI WILL ONLY CONSIST OF THE

CAGE CODE, ORIGINAL PART NUMBER AND SERIAL NUMBER WITHIN ORIGINAL PART NUMBER.

5. HUMAN READABLE INFORMATION (HRI) FONT TYPE AND READABILITY SHALL BE PER MIL-STD-130, EXCEPT AS NOTED, AND FIT WITHIN AREA MARKED. HRI SHOWN IS NOT TO SCALE AND IS TO INDICATE PREFERRED LOCATION ONLY. MAINTAIN

MINIMUM .030 DISTANCE FROM EDGE OF LABEL

6. PLACE CAGE CODE IN THIS SPACE.

7. PLACE ORIGINAL PART NUMBER IN THIS SPACE.

8. PLACE SERIAL NUMBER OF ORIGINAL PART NUMBER IN THIS SPACE.

9. PLACE HRI IN THIS SPACE. THE HRI WILL ONLY CONSIST OF THE CAGE CODE, ORIGINAL PART NUMBER AND SERIAL

NUMBER OF ORIGINAL PART NUMBER.

10. IF MANUFACTURED LOCALLY LASER ETCH ALL INFORMATION IN ACCORDANCE WITH AS 478-15B.

11. DELETED

12. WHITE LABEL WITH BLACK RIBBON RICOH B110C, R4800 OR EQUIVALENT.

13. DELETED

14. PLACE NOMENCLATURE OR NOUN IN THIS SPACE.

15. DELETED

16. PLACE DATE OF LAST OVERHAUL IN THIS SPACE. TEXT SHALL READ, "DATE OF LAST OVERHAUL: MMYY", WHERE MM IS THE NUMBER REPRESENTING THE MONTH OF THE LAST OVERHAUL AND YY REPRESENTS THE YEAR OF THE LAST

OVERHAUL.

17. DELETED

18. PLACE NATIONAL STOCK NUMBER IN THIS SPACE.

19. PLACE HRI DATA IDENTIFIER (18S) IN THIS SPACE.

20. PLACE HRI SERIALIZATION SEQUENCING CODE IN THIS SPACE. SERIALIZATION SEQUENCING CODE SHALL BE CONSTRUCTED OF CAGE CODE + 6-CHARACTER ALPHANUMERIC UNIQUE SEQUENCING CODE. CAGE CODE IS THAT OF

THE ACTIVITY RESPONSIBLE FOR GUARANTEEING UNIQUENESS OF THE SEQUENCING CODE.

TABLE 1

DASH NO. MATERIAL/SPECIFICATION

MANUFACTURER

ADDRESS CAGE

CODE

MANUFACTURER

PART NO.

-01 -05 -09 -13 -21 -31 -35 -39 -43 -47 -53

-03 -07 -11 -17 -25 -33 -37 -41 -45 -51

TESA SECURE 6973 PV6

(MATTE BLACK)

TESA TAPE INC.

5825 CARNEGIE BLVD.

CHARLOTTE, NC

28209

38XJ0

TESA SECURE 6973 PV6

3M SCOTCHMARK #7847

3M INDUSTRIAL TAPE AND

SPECIALITIES DIVISION

3M CENTER 220-7W-03

ST. PAUL, MN 55144

52152 7847

-15 -19 -23 -27

XF-583

POLYONICS INC.

867 ROUTE 12 UNIT 4

WESTMORELAND, NH

03467-4740

373S2 XF-583

B-479

BRADY WORLDWIDE INC.

6555 GOOD HOPE RD

MILWUAKEE, WI

53223-4634

1AA96 B-479

-55 BLACK ANODIZED

ALUMINUM

MONODE MARKING

PRODUCTS INC.

7620 TYLER BOULEVARD

MENTOR, OHIO 44060

15785 TAG1X1.75X.012B

-57

TESA 6930 PV3

TESA TAPE INC.

5825 CARNEGIE BLVD.

CHARLOTTE, NC

28209

38XJ0

TESA 6930 PV3

4 6E 4 6E 4 6E 4 6E 4 6E 4 4E 4 4E 4 4E 4 4E 4 4E 4 8E 4 8E 4 8E 4 8E 4 7B 4 4B

ALFRED FLORES 070424

070711

070717

ICBM

RICK

HARRISON080820

C SEE EO NO. 10A0710 MIKE

MCKIM100526

LABEL, UID, DISK 98747 -09 SEE TABLE 1 2 7D

LABEL, UID, MONODE TAG1X1.75X.012B 98747 -55 SEE TABLE 1 5 8E

LABEL, UID, PTO SHAFT 98747 -57 SEE TABLE 1 5 8B

D SEE EO NO. 10A1433-H

1” x 1.75” x .012”

RICK

HARRISON101213

7 6 5

8 67 5

4 3 2 1

4 23

SIZE

REV DESCRIPTION DATE APPROVED

REVISIONS

CAGE CODE DWG NO.

98747E 200733803

SCALE: NOTED SHEET: 4EF (AUTOCAD 2004)

W

N

O

R

V

LABEL, UID, DISK, MRI ONLY

DASH NO. Ø A B C

-41 1.500 .750 .375

-43 1.000 .500 .250

-45 .750 .375 .188

-47 .500 .250 .125

2X B

2X C

Ø A

4 LABEL, UID, RECTANGLE, MRI ONLY

DASH NO. A B

-17 .180 .420

-19 .180 .420

-21 .227 .560

-23 .227 .560

-25 .310 .810

-27 .310 .810

LABEL, UID, RECTANGLE, MRI ONLY

NOT TO SCALE

4X R .060

LABEL, UID, SQUARE, MRI ONLY

DASH NO. A

-31 .350

-33 .475

-35 .600

-37 .725

-39 .850

LABEL, UID, SQUARE, MRI ONLY

LABEL, UID, DISK, MRI ONLY

-51 LABEL, UID, OVERHAUL DATE

SCALE: 4/1

2.000

.600

-53 LABEL, UID, NATIONAL STOCK NUMBER

SCALE: 4/1

2.000

.600

SEE EO NO. 10A0710 MIKE

MCKIM100526

5CAGE

P/N S/N

NSN

5CAGE

P/N S/N

DATE OF LAST OVERHAUL:

A SEE EO NO. 10A1433-H RICK

HARRISON101213

200733803_sht01d

200733803_sht04d

200945069_sht01b

200945069_sht04b

200945069_sht05b

MEMORANDUM FOR: Gisele Lajoie Sr. Contracts Specialist – Military Programs – Customer Service UTC AEROSPACE SYSTEMS

UTAS/Hamilton Sundstrand

FROM: DLA Aviation - AOBB 3001 Staff Dr., 2B95 Tinker AFB, OK 73145

SUBJECT: Letter Solicitation SPRTA1-19-R-0174 to order the CONSTANT SPEED DRIVE against the Hamilton Sundstrand

BOA SPRPA1-13-G-001X. NSN: 1650-01-313-4227; PN: 739827B; PR: FD2030-19-00927.

This Solicitation for subject part is sole sourced to Hamilton Sundstrand Corporation (cage 99167).

Cage Code P/N NSN Noun Best Estimated Quantity (BEQ)

99167 739827B 1650-01-313-4227 CONSTANT SPEED DRIVE 5

Please provide pricing and delivery for purchase of this NSN in accordance with the terms and conditions of the Hamilton Sundstrand BOA, SPRPA1-13-G-001X, as well as FAR 15 Clauses i.e. 52.215-10, 52.215-12, 52.219-9, 52.222-54, 252.211-7006, 252.225-7008, 252.225-7009, 252.215-7009, 52.215-20, 52.215-22, and 52.215-23. Hamilton is requested to provide capacity, PLT and pricing based upon the firm quantity listed below.

Quantity: 5 each

IUID: DFARS 252.211.7003 applies – See Note 3

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required.

Quality Assurance: Standard Inspection Buy American Act/balance of Payments Program Requested Delivery: 5 each On or Before 25 SEP 2021

Ship to: DSR004 Supplemental Address: DA4SAP

The terms and conditions of the Hamilton Sundstrand BOA SPRPA1-13-G-001X will apply to this NSN. Please respond with your pricing and delivery for the item by the solicitation closing date of 1 Mar 2019. If you have any further questions, please contact Mindy Cannon 405-855-3544 or mindy.cannon@us.af.mil.

Sincerely, //SIGNED//

Mindy Cannon Contracting Officer

ATTACHMENTS:

NOTE 1 – Packaging to be accomplished IAW the Special Packaging Instructions attached NOTE 2 - Transportation to be accomplished IAW the applicable transportation documents attached

DEFENSE LOGISTICS AGENCY

AVIATION AT OKLAHOMA CITY

3001 STAFF DRIVE SUITE 2AG1 109B

TINKER AIR FORCE BASE, OKLAHOMA 73145-3015

30 Jan 2019

NOTE 3 – IUID Marking to be accomplished IAW the applicable IUID checklist and engineering orders attached