2.02 SPRMM121RRB83-0001.pdf

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE Prescribed by GSA

FAR (48 CFR) 53.243

STANDARD FORM 30 (REV. 10-83)

(a) By completing Items 8 and 15, and returning ____ copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDG- MENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

30-105

(If required)

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

tended.

is not ex-is extended,

12. ACCOUNTING AND APPROPRIATION DATA

(Organized by UCF section headings, including solicitation/contract subject matter where feasible.)14. DESCRIPTION OF AMENDMENT/MODIFICATION appropriation date, etc.)

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

(Signature of Contracting Officer)

(Specify authority)

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES

10A. MODIFICATION OF CONTRACT/ORDER NO.

(SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.(No., street, county, State and Zip Code)8. NAME AND ADDRESS OF CONTRACTOR

6. ISSUED BY

PAGE OF PAGES1. CONTRACT ID CODE

3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO.

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

IN ITEM 10A.

THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO:

SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

(such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

(Specify type of modification and authority)D. OTHER

BY(Signature of person authorized to sign)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

CODE FACILITY CODE

CODECODE

(Type or print)16A. NAME AND TITLE OF CONTRACTING OFFICER

16B. UNITED STATES OF AMERICA

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

15B. CONTRACTOR/OFFEROR

15A. NAME AND TITLE OF SIGNER (Type or print)

(SEE ITEM 13)

(If applicable)5. PROJECT NO.4. REQUISITION/PURCHASE REQ. NO.

7. ADMINISTERED BY (If other than Item 6)

16C. DATE SIGNED15C. DATE SIGNED

Contractor is not, is required to sign this document and return ____ copies to the issuing office.

10B. DATED

9B. DATED

E. IMPORTANT:

1 8

0001 2021 AUG 10 20028-0050 (FMBREJ )

SPRMM1

DLA MARITIME - MECHANICSBURG

DLR PROCUREMENT OPS DLA-ZI

P. O. BOX 2020, 5450 CARLISLE PIKE

MECHANICSBURG, PA 17055-0788

CREATOR OFC CD: ZIBA2

SPRMM1-21-R-RB83

X

2021 JUL 24

X X

THE HOUR AND DATE SPECIFIED FOR RECEIPT OF OFFERS IS EXTENDED TO 2:00 PM LOCAL TIME ON 2021 SEP 10.

SEE NEXT PAGE

SPRMM1-21-R-RB83 AMEND: 0001 PAGE 2 OF 8

NOTE:

AMENDMENT IS BEING ISSUED TO UPDATE THE TDP FOR THIS REQUIREMENT. THE REVISED TDP IS SHOWN IN THE FOLLOWING PAGES.

THE SOLICITATION CLOSING IS EXTENDED TO 10 SEPTEMBER 2021.

ALL OTHER TERMS AND CONDITIONS REMAIN UNCHANGED.

PAGES

OFPAGEREFERENCE NO. OF DOCUMENT BEING CONTINUED

NAME OF OFFEROR OR CONTRACTOR

CONTINUATION SHEET

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

SPRMM1-21-R-RB83 AMEND: 0001 3 8

0001 TDP VERSION NUMBER IS CHANGED FROM 006 TO 008

SEE TECHNICAL REQUIREMENTS IN SECTIONS C, D, E AND ATTACHMENTS

ALL REFERENCES TO WAIVERS ON PRIOR TDPS ARE NO LONGER APPLICABLE

SPRMM1-21-R-RB83 AMEND: 0001 PAGE 4 OF 8

PART I - THE SCHEDULE

SECTION C

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

CLIN: 0001

NIIN: 015778328 ACTIVITY USE ONLY: TDP VERSION NO.: 008

ITEM NAME: ANTENNA CONTROL GRP

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the ANTENNA CONTROL GRP .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made.

2.1.2 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.

2.3

DRAWING NO. CAGE REV DOC TYPE DISTR CD SHEET NR REV TYPE SIZE

RE-B102094 80064 C D3 0001 C 49998 0038248

RE-B102107 80064 E D3 0001 E 49998 0068703

RE-B102111 50225 C D3 0001 C 49998 0026842

RE-B102112 50225 C D3 0001 C 49998 0025803

RE-B102113 50225 B D3 0001 B 49998 0022569

RE-B102116 50225 C D3 0001 C 49998 0024877

RE-B102121 50225 F D3 0001 F 49998 0033863

RE-B102122 80064 D D3 0001 D 49998 0251146

RE-B102124 80064 E D3 0001 E 49998 0123376

RE-B102125 80064 D D3 0001 D 49998 0047153

RE-B102129 50225 C D3 0001 C 49998 0026263

RE-B102130 50225 E D3 0001 E 49998 0041548

RE-B102131 50225 E D3 0001 E 49998 0041677

RE-B102133 50225 C D3 0001 C 49998 0024607

RE-B102135 80064 J D3 0001 J 49998 0065379

RE-B102136 80064 C D3 0001 C 49998 0041481

RE-B102137 80064 D D3 0001 D 49998 0042789

RE-B102138 80064 D D3 0001 D 49998 0040619

RE-B102139 80064 D D3 0001 D 49998 0043360

RE-B102140 80064 E D3 0001 E 49998 0050062

RE-B102141 80064 F D3 0001 F 49998 0081427

RE-B102142 80064 E D3 0001 E 49998 0047323

RE-B102143 50225 F D3 0001 F 49998 0130256

RE-B102144 80064 B D3 0001 B 49998 0037175

RE-B102145 80064 C D3 0001 C 49998 0042339

RE-B102146 80064 E D3 0001 49998 0073812

RE-B102147 80064 C D3 0001 C 49998 0052133

RE-B102148 80064 B D3 0001 B 49998 0054967

RE-B102150 80064 E D3 0001 E 49998 0057048

RE-B102151 80064 E D3 0001 E 49998 0055735

RE-B102154 50225 B D3 0001 B 49998 0038831

RE-B102155 80064 D D3 0001 D 49998 0107088

RE-B102156 80064 E D3 0001 E 49998 0136330

RE-B102157 50225 B D3 0001 B 49998 0046975

RE-B102158 50225 B D3 0001 B 49998 0041778

RE-B102159 50225 C D3 0001 C 49998 0044902

SPRMM1-21-R-RB83 AMEND: 0001 PAGE 5 OF 8

RE-B102161 80064 F D3 0001 49998 0067358

RE-B102162 80064 D D3 0001 D 49998 0097450

RE-B102163 80064 D D3 0001 D 49998 0091627

RE-B102164 80064 C D3 0001 C 49998 0079678

RE-B102181 50225 D D3 0001 D 49998 0026774

RE-B102183 80064 C D3 0001 C 49998 0085302

RE-B102186 50225 D D3 0001 D 49998 0108359

RE-B102218 50225 C D3 0001 C 49998 0026814

RE-B102219 50225 C D3 0001 C 49998 0026787

RE-B102222 50225 E D3 0001 E 49998 0037962

RE-B102224 50225 D D3 0001 D 49998 0027968

RE-B102235 50225 E D3 0001 E 49998 0032122

RE-B102236 50225 D D3 0001 D 49998 0029095

RE-B102238 50225 C D3 0001 C 49998 0032836

RE-B102244 50225 C D3 0001 C 49998 0028536

RE-B102248 50225 D D3 0001 D 49998 0027328

RE-B102249 50225 D D3 0001 D 49998 0029099

RE-B102250 50225 E D3 0001 E 49998 0032166

RE-B102251 80064 D D3 0001 D 49998 0043474

RE-B102257 80064 E D3 0001 E 49998 0126324

RE-B102258 50225 C D3 0001 C 49998 0027876

RE-B102259 50225 D D3 0001 D 49998 0026732

RE-B102260 80064 H D3 0001 H 49998 0138850

RE-B102265 50225 C D3 0001 C 49998 0024112

RE-B102267 50225 C D3 0001 C 49998 0025115

RE-B102277 50225 B D3 0001 B 49998 0022276

RE-B102406 53711 B D3 0001 B 49998 0038193

RE-C102103 50225 F D3 0001 F 49998 0040090

RE-C102104 50225 E D3 0001 E 49998 0033608

RE-C102117 80064 D D3 0001 D 49998 0149723

RE-C102119 80064 F D3 0001 F 49998 0156813

RE-C102120 80064 E D3 0001 E 49998 0168221

RE-C102123 80064 G D3 0001 G 49998 0149300

RE-C102149 80064 E D3 0001 E 49998 0069803

RE-C102160 50225 G D3 0001 F 49998 0138545

RE-C102184 50225 E D3 0001 E 49998 0035246

RE-C102187 50225 D D3 0001 D 49998 0028403

RE-C102266 80064 E D3 0001 E 49998 0119811

RE-C49486 80064 G D3 0001 G 49998 0163657

RE-C49491 80064 G D3 0001 F 49998 0057477

RE-C49493 80064 G D3 0001 G 49998 0147223

RE-C49495 80064 H D3 0001 G 49998 0186352

RE-C49499 50225 C D3 0001 C 49998 0027972

RE-C49501 80064 E D3 0001 E 49998 0050639

RE-C49502 80064 H D3 0001 G 49998 0044345

RE-D102093 80064 G D3 0001 G 49998 0059859

RE-D102098 50225 F D3 0001 F 49998 0038716

RE-D102102 80064 F D3 0001 F 49998 0137719

RE-D102118 80064 G D3 0001 G 49998 0163923

RE-D102126 80064 E D3 0001 E 49998 0173323

RE-D102127 80064 J D3 0001 H 49998 0194622

RE-D102128 80064 E D3 0001 E 49998 0163478

RE-D102152 80064 E D3 0001 E 49998 0085710

RE-D49481 80064 H D3 0001 H 49998 0250204

RE-F102091 80064 D D3 0001 D 49998 0046820

RE-F102095 50225 F D3 0001 F 49998 0060655

RE-F102096 50225 H D3 0001 H 49998 0069583

RE-F102097 50225 C D3 0001 C 49998 0109061

RE-F102099 50225 D D3 0001 D 49998 0032070

RE-F102132 50225 C D3 0001 C 49998 0032918

RE-F49492 80064 J D3 0001 J 49998 0164993

02368001 53711 E D3 0001 E 49998 0175268 02368001 88594 F D3 0001 F 49998 0200518 02368002 50225 F D3 0001 F 49998 0052213 02368003 50225 E D3 0001 E 49998 0053250 02368004 50225 D D3 0001 D 49998 0041405 02368005 88594 B D3 0001 B 49998 0074478 02368006 50225 B D3 0001 B 49998 0038823 02368007 88594 E D3 0001 E 49998 0176456 02368010 50225 E D3 0001 E 49998 0071076 02368011 88594 - D3 0001 - 49998 0145717 02712011 50225 F D3 0001 F 49998 0147468

SPRMM1-21-R-RB83 AMEND: 0001 PAGE 6 OF 8

02712012 50225 A D3 0001 A 49998 0037660 02712013 88594 C D3 0001 C 49998 0135753 03400001 88594 C D3 0001 C 49998 0105398 03400002 50225 B D3 0001 B 49998 0181852 03400003 88594 B D3 0001 B 49998 0391848 03400004 88594 C D3 0001 C 49998 0203700 03400005 50225 C D3 0001 C 49998 0116571 03400006 50225 C D3 0001 C 49998 0129794 03400007 50225 A D3 0001 A 49998 0048831 03400008 88594 B D3 0001 B 49998 0129951 03400009 88594 A D3 0001 A 49998 0274779 03400010 88594 A D3 0001 A 49998 0351264 03401003 50225 A D3 0001 A 49998 0029868 03405002 88594 C D3 0001 C 49998 0178430 03405003 88594 B D3 0001 B 49998 0194628 03405004 88594 A D3 0001 A 49998 0063856 03405006 88594 C D3 0001 C 49998 0162049 7226168 53711 B D3 0001 B 49998 0234229 7226169 53711 A D3 0001 A 49998 0061610 7226169 53711 A D3 0002 A 49998 0029680 7226169 53711 A D3 0003 A 49998 0026365 7226169 53711 A D3 0004 A 49998 0021355 7226169 53711 A D3 0005 A 49998 0016714 7556876 53711 - D3 0001 - 49998 0028010 7556876 53711 - D3 0002 - 49998 0014731 7556876 53711 - D3 0003 - 49998 0008260 7556876 53711 - D3 0004 - 49998 0010539 7556876 53711 - D3 0005 - 49998 0006627 7624980 53711 C D3 0001 C 49998 0085796 7649065 53711 B D3 0001 B 49998 0339789

DOCUMENT REFERENCES

SPEC NO. SLASH NO. PART NO REV DATE DISTR CD AMEND CHG NTC SUPP

MIL-STD-129 P 29 OCT 04 A 03

ISO9001 17 APR 01 A

MIL-STD-973 13 JAN 95 A 03

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The ANTENNA CONTROL GRP furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no.

<53711 7649065>

3.2 Marking - This item shall be physically identified in accordance with <MIL-STD-129> .

3.3 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.)

3.3.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation. Such notification shall be in writing setting forth the contract under which the prior authorization was granted, the date of the granting of the authorization, and the name of the granting authority.

Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below.

The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788.

Contractors are cautioned that implementing engineering changes, waivers, deviations or technical inquiries into the contract/purchase order without approval of the Contracting Officer will be at the sole risk of the Contractor.

SPRMM1-21-R-RB83 AMEND: 0001 PAGE 7 OF 8

3.4 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material will be cause for rejection.

If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a "Warning Plate" stating that metallic mercury is a functional part of the item and will include name and location of that part.

The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are located so as not to constitute a contamination hazard.

If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the requirements of this contract are concerned.

These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall insure SubContractor compliance with these requirements.

Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided:

Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface ship atmosphere.

PART I - THE SCHEDULE

SECTION D

PACKAGING AND MARKING

CLIN: 0001

NIIN: 015778328 ACTIVITY USE ONLY: TDP VERSION NO.: 008

ITEM NAME: ANTENNA CONTROL GRP

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

CLIN: 0001

NIIN: 015778328 ACTIVITY USE ONLY: TDP VERSION NO.: 008

ITEM NAME: ANTENNA CONTROL GRP

4. QUALITY ASSURANCE

4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the

SPRMM1-21-R-RB83 AMEND: 0001 PAGE 8 OF 8

right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.2 Quality System Requirements - The supplier shall provide and maintain a quality system acceptable to the Government. The quality system requirements shall be in accordance with ISO 9001.

4.2.1 <Suppliers currently using and maintaining Inspection System Requirements to MIL-I-45208 are granted permission to utilize this if desired.>

4.3 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.4 Records of Inspection - (This requirement is not applicable to Government Purchase Orders) Records of all inspection work performed by the Contractor, as referenced elsewhere in this contract, shall be kept complete and available to the Government during the performance of the contract and for a period of four years after final delivery of supplies.

PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

SECTION J

LIST OF ATTACHMENTS

CLIN: 0001

NIIN: 015778328 ACTIVITY USE ONLY: TDP VERSION NO.: 008

ITEM NAME: ANTENNA CONTROL GRP

DOCUMENT NAME EXHBT/ATTCHMNT

NOTES ATTACHMENT 1

SPRMM1-21-R-RB83 AMEND: 0001

ATTACHMENT 1 PAGE: 1

CLIN: 0001

NIIN: 015778328 ACTIVITY USE ONLY: TDP VERSION NO.: 008

ITEM NAME: ANTENNA CONTROL GRP

6. NOTES

6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products.

A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk.

B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies.

C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to:

Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035

D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document.

E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from:

Contracting Officer

NAVICP-MECH

Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788

F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from:

Commanding Officer

NAVICP-MECH

Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788

G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from:

Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094

H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to

NAVICP-MECH.