Spring Initiator 10520412 Form 43.pdf
PDF 44 KB Posted
- Attached to
- M27 Parts Federal contract opportunity
- Solicitation number
- N0017424Q0011
About this file
This document provides special shipping and packaging instructions for a spring initiator part under solicitation number N0017424Q0011 for M27 parts issued by the Department of the Navy Naval Sea Systems Command. The instructions specify that each spring initiator part must be placed in an appropriately sized desiccant bag and heat-sealed or zip locked polybag marked with the part name, number, revision letter and quantity. The bagged parts must then be bulk packaged for shipment to the Indian Head Division Naval Surface Warfare Center with the contract number, part information and quantities clearly marked on two surfaces of the shipping container.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Housing Firing Pin 10520410 Form 43.pdf | ||
| M27 PSS SOW V1.pdf | ||
| Pin Initiator 10520553 Form 43.pdf | ||
| N0017424Q0011 - Request for Quote.pdf | ||
| Pin Safety 10522817 Form 43.pdf | ||
| Pin Firing 10520411 Form 43.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
NSWC IHEODTD 4200
NSWC IHD 4200/15 REV FEB 2021
Page of
PREVIOUS EDITION IS OBSOLETE
Attachment ( )
SPECIAL SHIPPING & PACKAGING INSTRUCTIONS
AKA Contracts Form 43 Source selection information, see FAR 2.101 and FAR 3.104
FEB 2021
degas.legal@navy.mil 07/25/2018 Degas Legal Special Shipping and Packaging Instructions AKA Contracts Form 43 02/23/2021 A. Insert a desiccant bag per MIL-D-3464, Type I or II of appropriate size, with up to 50 components, into any poly-bag with a minimum thickness .002 inch, which is necessary to provide moisture protection. Each unit may either be heat-sealed, or zip locked.
All bags must be either be heat-sealed, or zip locked. The bag must be legibly marked with part name, part number, revision letter and quantity.
C. After completion of the above requirements the parts are to be bulk packaged for shipment to the Indian head Division, Naval Surface Warfare Center.
Note: The shipping containers must be legibly marked on two surfaces with the contract number, part name, part number and quantity.
Attachment ( )
| CurrentPage: |
| PageCount: |
| NormalColorsFld: |
| GreyedColorsFld: |
| TextField1: |
| Date: 8/30/2023 |
| Date: |
| Date: 10520412, Spring, Initiator |
| CheckBox1: |
File details come from the government source that posted it. Updated .