Engineering Data Requirements.pdf
PDF 101 KB Posted
- Attached to
- Amplifier Federal contract opportunity
- Solicitation number
- SPRHA3-25-Q-0441
- Issued by
- Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Attachment A) specifying manufacturing requirements for an Amplifier Assembly (AN/FPQ-16) with part number 9378602-10 and National Stock Number 5996014333730ZA.
The document outlines unique identification (UID) requirements that must be applied per MIL-STD-130 in lieu of FPS-3008, including specific labeling requirements for both human-readable and machine-readable formats. The human-readable portion must be minimum 1/8th inch and include CAGE (17V), P/N (1P), and Serial Number (1S). The machine-readable portion requires a minimum 1/4 inch square 2D matrix (Construct 2) with the same information. The document emphasizes that materials and sources listed in standards, specifications, and drawings are the only authorized options, with any substitutions or deviations requiring prior engineering approval. All labels must maintain existing label data if replacing previous labels and use the same label material as specified in the original drawings.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA325Q0441_0007 CUI SSI.pdf | ||
| SPRHA325Q0441_0006 CUI SSI.pdf | ||
| SPRHA325Q0441_0005 CUI SSI.pdf | ||
| SPRHA325Q0441_0004 CUI SSI.pdf | ||
| SPRHA325Q0441_0003 CUI SSI.pdf | ||
| Engineering Change Proposal CDRL.pdf | ||
| SPRHA325Q0441_0002 CUI SSI.pdf | ||
| SPRHA325Q0441_0001 CUI SSI.pdf | ||
| FA Test Report CDRL.pdf | ||
| SPRHA325Q0441 CUI SSI.pdf | ||
| Counterfeit Prevention Plan CDRL.pdf | ||
| Engineering Data List.pdf | ||
| FA Test Plan CDRL.pdf | ||
| Packaging Statement of Work.pdf | ||
| Manufacturing Qualification Requirements.pdf | ||
| Unmarked Eng Data.pdf |
Show all 16
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
AMPLIFIER ASSEMBLY ( AN/FPQ-16)
2. PART NUMBER:
9378602-10
3. NATIONAL STOCK NUMBER:
5996014333730ZA
PREPARED BY:
KENDRIC HORNSBY
OFFICE SYMBOL:
415 SCMS/GUMBC
DATE:
DEC. 7, 2023
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE / MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .