Engineer Notes.xlsx

12 KB Posted

Attached to
POWER CABLE ASSEMBLY (25-R-0007)
Solicitation number
SPRHA225R0007
Issued by

About this file

Written by GovTribe AI ·

The document is an Excel spreadsheet containing engineer notes related to a Defense Logistics Agency Aviation solicitation for power cable assemblies for the Minuteman III ICBM system. The spreadsheet includes detailed sourcing recommendations for various technical components, including dust caps, wire, connectors, and adhesives, with specific supplier suggestions such as TCAS Aviation, LLC, Boeing, Mouser Electronics, and ITT Cannon RF Products.

The solicitation (SPRHA225R0007) covers multiple NSN-coded power cable assemblies with varying quantities, totaling approximately 218 units across 12 different NSN part numbers. Recommended suppliers for specialized components include Kirkhill, Inc. for neoprene jacket material, Wiremasters, Inc. for twisted shielded cable, and Boeing for specific connectors. The engineer notes provide technical sourcing guidance, alternative part recommendations, and potential supplier contacts to support the procurement process for these critical ICBM cable assembly components.

View the file

Other files

File Type Posted
SPRHA2-25-R-0007-0004 CUI.pdf PDF
SPRHA2-25-R-0007-0002 CUI.pdf PDF
SPRHA2-25-R-0007-0001 CUI.pdf PDF
SPRHA225R0007.pdf PDF
CDRLTESTINSPECTION-A062.pdf PDF
CDRLCPP-A014.pdf PDF
CDRLTESTPLAN-A060.pdf PDF
EDL-Portfolio.pdf PDF
SOW.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1

Engineer Notes:
DRAWING NUMBERDESCRIPTIONResponse
1BACC14XDUST CAP, SENT COPY IS 1 PAGE TO CONTACT BOEINGDocument Found*
2BMS 13-11WIREWould Recommend TCAS Aviation, LLC**
3BMS 13-5WIREWould Recommend TCAS Aviation, LLC **
4BAC 5109FAB. SPECDocument Found*
5PLPD-FDUST COVERSee Below***
6EXC943HEAT SHRINK TUBINGWould Recommend Mouser or Amphenol for this part
7BACC47BCONTACT, SENT COPY IS 1 PAGE TO CONTACT BOEINGDocument Found (BACC47BW and BACC47BV)*
8D180-18754-1PROCEDURE SPECDocument Found*
9414-3980ConnectorTry procurement through Boeing (CAGE: 08903)
10PR 380 A1/2ADHESIVECan use PR_2701 Instead as substitute*
11Hysol 1105ADHESIVECan use Loctite 0151 Instead as substitute*
* I was able to find these documents I will send you the information via DoD Safe right after this.
** For BMS13-11 would recommend TCAS AVIATION, LLC (See attached email). Although not mentioned in email BMS 13-5 should also be available by the same contractor.
*** For PLPD-F there are multiple Part Numbers. Here are some good sources of supply for them:
DescriptionPart NumberManufacturerCage
DUST COVERPLPD-F-11TRI-COM INC.60296
DUST COVERPLPD-F-15DCX-XHOL Enterprises, INC30463
DUST COVERPLPD-F-17DCX-XHOL Enterprises, INC30463
DUST COVERPLPD-F-19DCX-XHOL Enterprises, INC30463
DUST COVERPLPD-F-21DCX-XHOL Enterprises, INC30463
DescriptionPart NumberManufacturerCage
DUST COVER660-01M22S6-01Mouser Electronics, INC1JN02
CONNECTOR, COVER660-032M2356-01Boeing*08903
CONNECTOR414-2575-008Boeing08903
CONNECTOR414-3980-157Boeing08903
CONNECTOR51-049-0000-220ITT Cannon RF Products98291
1. Kirkhill Yellow Neoprene jacket material:
We don’t have detailed information on this, however Kirkhill, Inc. is an active qualified contractor for the Air Force. They should have the information needed. If they provide a substitution material then this can possibly be qualified.
2. M27500-2TE2T03 twisted shielded cable:
We don’t have detailed information on this either, but Wiremasters, Inc. is also an active qualified contractor for the Air Force that is familiar with this part. This is an option for obtaining the part/information.

File details come from the government source that posted it. Updated .