SPI AK15653896.pdf
PDF 111 KB Posted
- Attached to
- FIRE EXTINGUISHER
- Solicitation number
- SPRDL1-25-R-0228
About this file
This is a DD Form 2169C, Special Packaging Instruction form, dated August 5, 2025 (Revision B), for a dry chemical fire extinguisher (Part/Drawing No. 901500 (3R5K2), National Stock No. 4210-01-565-3896, CAGE 19207, SPI No. AK15653896). The form specifies packaging and preservation requirements for this hazardous material item with an estimated unit pack weight of 17.6 pounds, cube of 0.644 cubic feet, and dimensions of 20.4 x 7.9 x 6.9 inches.
The form mandates military preservation using MIL-STD-2073-1 Method HM for cleaning and drying, with Level A packing using wood-cleated panelboard shipping boxes conforming to ASTM-D 6251 Type III Class 2 or nailed wood boxes per ASTM-D 6880 Class 2, and Level B packing using fiberboard or triplewall corrugated fiberboard boxes per ASTM D5118 or D5168. All packaging and labeling must comply with MIL-STD-129 and applicable hazardous material regulations including IATA Dangerous Goods Regulations, IMDG Code, CFR Titles 29, 40, and 49, AFMAN 24-204/TM 38-250, and DLAR 4145.41. Hazardous material package testing is required, and all shipments must be supported by documentation and signed shipper certification incorporated on DD Form 250 or equivalent acceptance documents, with all certificates and reports retained for three years. When total shipment quantity exceeds 125 pounds to the same destination, exterior packs without skids shall be palletized per MIL-STD-147.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL125R0228 conformed solicitation.pdf | ||
| SPRDL125R0228 amendment 0001.pdf | ||
| SPRDL1-25-R-0228 solicitation.pdf | ||
| SPI AK15653896.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
XFA
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
19207 AK
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
5 AUG 2025
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 11. UNIT PACK SIZE (INCHES)
NONE *
10. UNIT PACK CU (CU. FT.)
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD HM
13. CLEANING SEE NOTES
MIL-STD-2073-1
14. DRYING
MIL-STD-2073-1
15. PACKING
a. LEVEL A
MIL-STD-2073-1 AND NOTE E
b. LEVEL B
MIL-STD-2073-1 AND NOTE E
16. MARKING
MIL-STD-129 AND NOTE B
17. NOTES/ DRAWING
* WARNING – THIS IS AN ESTIMATED SPI. UNIT PACK WEIGHT, CUBE, AND SIZE ARE ESTIMATED AND INTENDED FOR
INTERNAL GOVERNMENT PLANNING PURPOSES ONLY
A. PACKAGE AND INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKAGING IN ACCORDANCE WITH:
MIL-STD-2073-1, ITEM SDS SHEET, PACKING TM 38-701, AND THE APPLICABLE REGULATION PER MODE OF
TRANSPORTATION IN EFFECT AT TIME OF SHIPMENT BELOW:
INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA) DANGEROUS GOODS REGULATIONS
INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE
CODE OF FEDERAL REGULATIONS (CFR) TITLE 29, TITLE 40 AND TITLE 49
INTERSERVICE PUBLICATIONS AFMAN24-204/TM 38-250/NAVSUP PUB 505/DLAI 4145.3 (FOR MILITARY AIR
SHIPMENTS)
JOINT MANUAL DLAR 4145.41 “PACKAGING OF HAZARDOUS MATERIAL”
B. ALL UNIT PACKS AND SHIPPING CONTAINERS SHALL BE MARKED AND LABELED IN ACCORDANCE WITH MIL-STD-
129 AND THE APPLICABLE HAZARDOUS MATERIAL REGULATION FOR THE MODE OF SHIPMENT.
C. HAZARDOUS MATERIAL PACKAGE TESTING SHALL BE CONDUCTED AS SPECIFIED BY NOTE “A” REGULATIONS.
D. HAZARDOUS MATERIAL SHIPMENT DOCUMENTATION
ALL SHIPMENTS SHALL BE SUPPORTED BY DOCUMENTATION ATTESTING TO THE DATE AND THE TEST RESULTS OBTAINED FROM PERFORMANCE PACKAGING TESTING. THE SHIPPER, IF NOT A SELF-CERTIFIER, SHALL BE RESPONSIBLE FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING PERFORMANCE TESTING SERVICES ARE, IN FACT, REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION. THE SHIPPER'S SIGNED CERTIFICATION THAT THE PACKAGED CONFIGURATION MEETS APPLICABLE REQUIREMENTS SHALL BE INCORPORATED ON THE DD FORM 250, MATERIEL INSPECTION AND RECEIVING REPORT, OR OTHER RELATED ACCEPTANCE DOCUMENT IF THE DD FORM 250 IS NOT USED. ALL CERTIFICATES AND REPORTS SHALL BE AVAILABLE FOR INSPECTION BY AUTHORIZED GOVERNMENT REPRESENTATIVES FOR A PERIOD OF THREE
YEARS.
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
19207 AK
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
5 AUG 2025
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
17. NOTES/ DRAWING
E. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBERBOARD BOXES, WEATHER-RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM D5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR
PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
File details come from the government source that posted it. Updated .