SPI AK15653896.pdf
PDF 157 KB Posted
- Attached to
- FIRE EXTINGUISHER
- Solicitation number
- SPRDL1-25-R-0228
About this file
This is a DD Form 2169C Special Packaging Instruction document for a dry chemical fire extinguisher (Part No. 901500, CAGE 3R5K2, National Stock No. 4210-01-565-3896). The form was last revised on 24 JUL 2025 (Revision A) and is dated 24 JUL 2025. The unit pack specifications indicate a weight of 17.6 pounds, cubic volume of 0.644 cubic feet, and dimensions of 20.4 x 7.9 x 6.9 inches. The SPI number is AK15653896.
The packaging and preservation requirements mandate compliance with MIL-STD-2073-1 Method HM for cleaning and drying, with Level A and Level B packing specifications. Marking shall follow MIL-STD-129 standards. All shipments must comply with hazardous material regulations including IATA Dangerous Goods Regulations, IMDG Code, CFR Titles 29, 40, and 49, and applicable military transportation publications. The shipper must conduct hazardous material package performance testing and provide signed certification on the DD Form 250 or related acceptance document. All test certificates and reports must be retained and made available to authorized government representatives for three years. If the shipper is not a self-certifier, third-party testing sources must be registered with the Department of Transportation.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL125R0228 amendment 0001.pdf | ||
| SPRDL125R0228 conformed solicitation.pdf | ||
| SPI AK15653896.pdf | ||
| SPRDL1-25-R-0228 solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 18 Pages
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
XFA
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Washington Headquarters Services, at whs.mc-alex.esd.mbx.dd-dod-informationcollections@mail.mil. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
901500 (3R5K2) DRY CHEMICAL, FIRE EXTINGUISHER 19207 AK15653896
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4210-01-565-3896 24 JUL 2025 A
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
001 NONE 17.6 * 0.644 * 20.4 X 7.9 X 6.9 *
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD HM
13. CLEANING SEE NOTES
MIL-STD-2073-1
14. DRYING
MIL-STD-2073-1
15. PACKING
a. LEVEL A
MIL-STD-2073-1 AND NOTE E
b. LEVEL B
MIL-STD-2073-1 AND NOTE E
16. MARKING
MIL-STD-129 AND NOTE B
17. NOTES/ DRAWING
* WARNING – THIS IS AN ESTIMATED SPI. UNIT PACK WEIGHT, CUBE, AND SIZE ARE ESTIMATED AND INTENDED FOR
INTERNAL GOVERNMENT PLANNING PURPOSES ONLY
A. PACKAGE AND INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKAGING IN ACCORDANCE WITH:
MIL-STD-2073-1, ITEM SDS SHEET, PACKING TM 38-701, AND THE APPLICABLE REGULATION PER MODE OF
TRANSPORTATION IN EFFECT AT TIME OF SHIPMENT BELOW:
• INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA) DANGEROUS GOODS REGULATIONS
• INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE
• CODE OF FEDERAL REGULATIONS (CFR) TITLE 29, TITLE 40 AND TITLE 49
• INTERSERVICE PUBLICATIONS AFMAN24-204/TM 38-250/NAVSUP PUB 505/DLAI 4145.3 (FOR MILITARY AIR
SHIPMENTS)
• JOINT MANUAL DLAR 4145.41 “PACKAGING OF HAZARDOUS MATERIAL”
B. ALL UNIT PACKS AND SHIPPING CONTAINERS SHALL BE MARKED AND LABELED IN ACCORDANCE WITH MIL-STD-
129 AND THE APPLICABLE HAZARDOUS MATERIAL REGULATION FOR THE MODE OF SHIPMENT.
C. HAZARDOUS MATERIAL PACKAGE TESTING SHALL BE CONDUCTED AS SPECIFIED BY NOTE “A” REGULATIONS.
D. HAZARDOUS MATERIAL SHIPMENT DOCUMENTATION
ALL SHIPMENTS SHALL BE SUPPORTED BY DOCUMENTATION ATTESTING TO THE DATE AND THE TEST RESULTS
OBTAINED FROM PERFORMANCE PACKAGING TESTING. THE SHIPPER, IF NOT A SELF-CERTIFIER, SHALL BE
RESPONSIBLE FOR ASSURING THAT THIRD PARTY SOURCES PROVIDING PERFORMANCE TESTING SERVICES
ARE, IN FACT, REGISTERED WITH THE DEPARTMENT OF TRANSPORTATION. THE SHIPPER'S SIGNED
CERTIFICATION THAT THE PACKAGED CONFIGURATION MEETS APPLICABLE REQUIREMENTS SHALL BE
INCORPORATED ON THE DD FORM 250, MATERIEL INSPECTION AND RECEIVING REPORT, OR OTHER RELATED
ACCEPTANCE DOCUMENT IF THE DD FORM 250 IS NOT USED. ALL CERTIFICATES AND REPORTS SHALL BE
AVAILABLE FOR INSPECTION BY AUTHORIZED GOVERNMENT REPRESENTATIVES FOR A PERIOD OF THREE
YEARS.
File details come from the government source that posted it. Updated .