Special Packaging Instructions (SPI) - AK15973752.pdf
PDF 260 KB Posted
- Attached to
- CYLINDER ASSEMBLY, ACTUATING, LINEAR
- Solicitation number
- SPRDL1-25-Q-0150
About this file
This DD Form 2169 is a Special Packaging Instruction for a hydraulic cylinder with National Stock Number 3040-01-597-3752. The document provides detailed specifications for packaging, preservation, and shipping of a hydraulic cylinder (Part Number PG200016G) manufactured by CAGE code 19207. Key packaging requirements include:
Preservation and Packaging Details: The cylinder must be cleaned and preserved using MIL-PRF-10924 preservative, with all grease fittings and openings sealed. It will be wrapped in MIL-PRF-121 Type II grease paper (36 x 96 inches) and packed in an ASTM-D6251 Type III, Class 2, Style A container measuring 88 x 13 x 8-3/4 inches. The total unit pack weight is 519.0 lbs with a volume of 12.218 cubic feet. The packaging is dated 20 May 2025 with Revision B, and includes specific instructions for blocking, bracing, and marking the reusable container with clear handling directions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment_SIGNED_SPRDL1-25-Q-0150-0001.pdf | ||
| SPRDL1-25-Q-0150__SIGNED Solicitation 08.01.2025.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
.PG200016G (3PSD7) HYDRAULIC CYLINDER 19207 AK15973752
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-597-3752 20 MAY 2025 B
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
001 NONE 519.0 12.218 91.0 X 14.5 X 16.0
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 20
13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-10924
MIL-STD-2073-1 2-C A/R CAPS/PLUGS: NAS-847
14. DRYING 3-D A/R PRESERVATIVE: MIL-PRF-16173, GR 4
MIL-STD-2073-1 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE: 36 X 96
15. PACKING
5-F 18 BLOCKING/BRACING: ASTM-D6199
6-G 1 CONTAINER: ASTM-D6251, TY III, CL 2, ST A,
a. LEVEL A MODIFIED, SIZE: 88 X 13 X 8-3/4
MIL-STD-2073-1 & NOTE H
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 & NOTE I
17. NOTES:
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. APPLY PRESERVATIVE THROUGH ALL GREASE (ZERK) FITTINGS.
C. SEAL ALL OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.
D. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
E. WRAP CYLINDER IN GREASE PAPER, SECURE WITH TAPE ASTM-D6123.
F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE PAGE 2 FOR SIZES AND ORIENTATION.
G. CONTAINER IS MODIFIED TO ALLOW FOR UN-NAILED TOP PANEL CLOSURE IN ACCORDANCE WITH ASTM-
D6251. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION.
H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
I. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND SIDES WITH MINIMUM 1/2 INCH HIGH BLACK LETTERS "REUSABLE CONTAINER, DO NOT DESTROY". IN ADDITION, THE TOP AND ENDS SHALL BE MARKED "REMOVE LAG SCREWS TO OPEN CONTAINER" USING
1/2 INCH HIGH BLACK LETTERS.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collect ion of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
PG200016G (3PSD7) HYDRAULIC CYLINDER 19207 AK15973752
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-597-3752 20 MAY2025 B
17. NOTES:
ITEM SIZE QTY REFERENCE
A 2 X 8 X 13 2 ASTM-D6199
B 2 X 4 X 13 4 ASTM-D6199
C 4 X 4 X 5-3/4 4 ASTM-D6199
D 1 X 4 X 8-3/4 8 ASTM-D6199
36 X 96 GREASE PAPER 1 MIL-PRF-121, TY II
88 X 13 X 8-3/4 CRATE 1 ASTM-D6251, TY III, CL 2, ST A
C
B
A
FOR CLARITY ITEM IS
SHOWN WITHOUT
GREASE PAPER WRAP
D
File details come from the government source that posted it. Updated .