SPI_-_AK16685991.pdf
PDF 697 KB Posted
- Attached to
- Wheel, Pneumatic; Transmission; Axle Assemblies; Pump, Hydraulic; Engine, Diesel; Manifold, Hydraulic
- Solicitation number
- SPRDL119R0338
About this file
This solicitation requests offers for the supply of various vehicle components. Required are 150 pneumatic tires, 5 each of transmissions, axle assemblies, hydraulic pumps, and diesel engines, and 10 each of hydraulic manifolds. All items must be from the approved manufacturer JCB Inc. (CAGE 0JKF0). Delivery is to destination. The solicitation is expected to be released on or around 08 November 2019 on FedBizOpps, with the actual closing date specified then. It will not be set aside for small businesses. Only approved sources and distributors will be considered.
Special Packaging Instruction - AK16685991
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL119R0338-0001.pdf | ||
| SPRDL119R0338.pdf | ||
| SPI_-_AK16684205.pdf | ||
| SPI_-_AK00000001.pdf | ||
| SPI_-_AK16684210.pdf | ||
| SPI_-_AK16683511.pdf | ||
| SPI_-_AK16723856.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-AI
AB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. 332/F7303 (0JKF0) PUMP, HYDRAULIC 19207 AK16685991
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4320-01-668-5991 9-18-2018
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 144.0 4.137 19.0 X 17.5 X 21.5
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 43
13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL FLUID
MIL-STD-2073-1D 2-C A/R PRESERVATIVE: MIL-PRF-16173, GR 4
14. DRYING 3-D A/R CAPS/PLUGS: NAS 847
MIL-STD-2073-1D 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE 30 X 48
15. PACKING
5-F (8) BLOCKING/BRACING: ASTM-D6199
4 2 X 4 X 12
a. LEVEL A
4 2 X 4 X 5
MIL-STD-129 & NOTE K
K
6-G 2 SETS ½” X 6” HARDWARE EACH SET INCLUDES:
EACH SET INCLUDES 1 PC ½” X 6” CARRIAGE BOLT,
b. LEVEL B
1PC ½” LOCK WASHER & 1PC ½” NUT
NOT APPLICABLE 7-H 1 CUSHIONING: A-A-59135, CL 1, GR A
SIZE: 18 X 48 X ¼” THICKNESS
16. MARKING 8-I 1 BAG: MIL-DTL-6060E, SIZE: 36 X 60 (FLAT LAYOUT)
MIL-STD-129 9-J 1 CONTAINER: ASTM-D6880, CL 2, ST 7,
SIZE: 16 X 16 X 15
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FILL PUMP WITH OPERATIONAL FLUID.
C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
D. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. WRAP PUMP IN PAPER AS SHOWN ON PAGE 4, SECURE WITH TAPE.
F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING
TOGETHER USING NAILS/STAPLES CONFORMING TO ASTM-F1667, SEE PAGES 2 – 3 (“SUPPORT
ASSEMBLY”).
G. HARDWARE SHALL BE COMMERCIAL GRADE AND PAINTED OR PLATED.
H. WRAP FOAM CUSHIONING AROUND PUMP TO PREVENT DAMAGE TO THE FOIL BAG, SECURE WITH
TAPE.
I. ENVELOPE FABRICATION SHALL BE IN ACCORDANCE WITH SPECIFICATION MIL-DTL-6060. MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BAG AT THE MOUNTING LOCATION USING MMM-A-260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A SUFFICIENT QUNATITY OF ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE AN AIRTIGHT
SEAL (SEE PAGES 2 – 3).
J. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D6880 USING 1/4” X 3” LAG SCREWS FASTENED INTO
SKID MEMBERS.
K. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -AI OMB No. 0704-0188 AB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
332/F7303 (0JKF0) PUMP, HYDRAULIC 19207 AK16685991
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4320-01-668-5991 9-18-2018
17. NOTES/DRAWING
FOIL BAG (36 X 60 FLAT LAYOUT)
½” DIAMETER HOLE (2 PLACES)
2 X 4 X 12
(QTY 4)
2 X 4 X 5
(QTY 4)
36 X 60
FOIL BAG
½ X 6”
CARRIAGE BOLT
(QTY 2)
SUPPORT ASSEMBLY
45 DEGREE CHAMFER ON THE OUTER CORNERS OF
THE SUPPORT ASSEMBLY AS SHOWN BELOW
DRILL
½” DIAMETER HOLE
2 PLACES
½” NUT &
LOCK WASHER
(QTY 2)
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -AI OMB No. 0704-0188 AB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
332/F7303 (0JKF0) PUMP, HYDRAULIC 19207 AK16685991
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4320-01-668-5991 9-18-2018
PLACE FOIL BAG OVER BOLTS
IAW MIL-DTL-6060E
INSERT CARRIAGE BOLTS
IN BASE PANEL HOLES
LINE SUPPORT ASSEMBLY WITH 30X48 PAPER
USE BOLTS TO PUNCTURE HOLES
PLACE PUMP ON SUPPORT ASSEMBLY
SECURE TO BOLT WITH LOCK WASHER AND NUT
PLACE SUPPORT ASSEMBLY OVER
BOLTS ATOP FOIL BAG
AFTER HARDWARE IS TIGHTENED
WRAP PAPER UP & AROUND PUMP
VACUUM SEAL FOIL BAG
WRAP IN 18 X 48 FOAM
File details come from the government source that posted it. Updated .