SPI_-_AK16683511.pdf

DDDD FFOORRMM 22116699,, JJUUNN 11999977 ((EEGG)) PPRREEVVIIOOUUSS EEDDIITTIIOONNSS AARREE OOBBSSOOLLEETTEE PPaaggee 11 ooff 66 DDeessiiggnneedd uussiinngg PPeerrffoorrmm PPrroo,, WWHHSS//DDIIOORR,, JJuunn 9977

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

400/H0612 (0JKF0) TRANSMISSION, VEHICULAR 19207 AK16683511

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-668-3511 9-18-2018

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 458.0 14.801 34.0 X 29.5 X 25.5

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 43

13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL FLUID

MIL-STD-2073-1D 2-C A/R PRESERVATIVE: MIL-PRF-16173, GR 4

3-D (3) BARRIER: MIL-PRF-121, TY II,

14. DRYING 6 X 20 (QTY 2) 40 X 80 (QTY 1)

MIL-STD-2073-1D 4-E (5) BLOCKING/BRACING: ASTM-D6199

1 4 X 4 X 22

15. PACKING

1 2 X 6 X 22 1 4 X 4 X 9-3/4

a. LEVEL A 1 3-1/2 X 9-3/4 X ¾” PLYWOOD

MIL-STD-129 & NOTE J 1 2 X 6 X 5-1/2

5-F (8) HARDWARE SETS (SHOWN BELOW)

4 EACH ½” X 8” CARRIAGE BOLT, ½” WASHER, ½” NUT

b. LEVEL B 1 EACH M16X2X80mm (MCMASTER 91280A850), M16 WASHER

NOT APPLICABLE 2 EACH M16X2X100mm (MCMASTER 91280A854), M16 WASHER

1 EACH M16X2X160mm (MCMASTER 91280A868), M16 WASHER

6-G 1 CUSHIONING: A-A-59135, CL 1, GR A

16. MARKING SIZE: 30 X 80 X ¼” THICKNESS

MIL-STD-129 7-H 1 BAG: MIL-DTL-6060E, SIZE: 48X100 (FLAT LAYOUT)

8-I 1 CONTAINER: ASTM-D6880, CL 2, ST 7,

SIZE: 31 X 28 X 19

1177.. NNOOTTEESS//DDRRAAWWIINNGG

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. FILL TRANSMISSION WITH OPERATIONAL FLUID.

C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.

D. WRAP TRANSMISSION IN PAPER, SECURE WITH TAPE.

E. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING

TOGETHER USING NAILS/STAPLES CONFORMING TO ASTM-F1667, SEE PAGES 2 – 3.

F. HARDWARE SHALL BE COMMERCIAL GRADE AND PLATED. SEE PAGE 2

MCMASTER CARR P/N’S: M16X2X80mm(91280A850), M16X2X100mm(91280A854), M16X2X160mm(91280A868)

NOTE: DO NOT USE POWER TOOLS ON XMSN BOLTS (M16) TORQUE TO 110 ft-lb (149 Nm)

G. WRAP FOAM CUSHIONING AROUND TRANSMISSION TO PREVENT DAMAGE TO THE FOIL BAG,

SECURE WITH TAPE.

DDDD FFOORRMM 22116699,, JJUUNN 11999977 ((EEGG)) PPRREEVVIIOOUUSS EEDDIITTIIOONNSS AARREE OOBBSSOOLLEETTEE PPaaggee 22 ooff 66

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

400/H0612 (0JKF0) TRANSMISSION, VEHICULAR 19207 AK16683511

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-668-3511 9-18-2018

17. NOTES/DRAWING

H. ENVELOPE FABRICATION SHALL BE IN ACCORDANCE WITH SPECIFICATION MIL-DTL-6060. MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BAG AT THE MOUNTING LOCATION USING MMM-A-260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A SUFFICIENT QUNATITY OF ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE AN AIRTIGHT

SEAL.

I. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D6880 USING 1/4” X 3” LAG SCREWS FASTENED

INTO SKID MEMBERS.

J. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

M16x2x80mm M16x2x160mm

48x100 FOIL

M16x2x100mm 48x80 PAPER

½” x 8” CARRIAGE BOLT

½” x 8” CARRIAGE BOLT

ASTMD-6880, BASE

SUPPORT

ASSEMBLY

4X4 X 22”

½” NUT, LOCK WASHER &

FLAT WASHER

EACH M16 BOLT HAS A M16

WASHER UNDER BOLT HEAD

DDDD FFOORRMM 22116699,, JJUUNN 11999977 ((EEGG)) PPRREEVVIIOOUUSS EEDDIITTIIOONNSS AARREE OOBBSSOOLLEETTEE PPaaggee 33 ooff 66

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

400/H0612 (0JKF0) TRANSMISSION, VEHICULAR 19207 AK16683511

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-668-3511 9-18-2018

3-1/2 X 9-3/4 X

¾ PLYWOOD

2X6 X 5-1/2

4X4 X 22

2X6 X 22

4X4 X 9-3/4

Drill 1-3/8 Diameter countersink holes, ¾ inch deep for M16 Bolts (Quantity

M16x2x100mm M16 Washer

M16x2x160mm M16 Washer

M16x2x160mm M16 Washer

DDDD FFOORRMM 22116699,, JJUUNN 11999977 ((EEGG)) PPRREEVVIIOOUUSS EEDDIITTIIOONNSS AARREE OOBBSSOOLLEETTEE PPaaggee 44 ooff 66

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

400/H0612 (0JKF0) TRANSMISSION, VEHICULAR 19207 AK16683511

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-668-3511 9-18-2018

M16x2x100mm M16 Washer

M16x2x160mm M16 Washer

M16x2x80mm M16 Washer

6 X 20 PAPER

100mm

80mm

100mm

160mm

TORQUE TO

110 ft-lb (149 Nm)

6 X 20 PAPER

TORQUE TO

110 ft-lb (149 Nm)

DDDD FFOORRMM 22116699,, JJUUNN 11999977 ((EEGG)) PPRREEVVIIOOUUSS EEDDIITTIIOONNSS AARREE OOBBSSOOLLEETTEE PPaaggee 55 ooff 66

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

400/H0612 (0JKF0) TRANSMISSION, VEHICULAR 19207 AK16683511

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-668-3511 9-18-2018

FOIL BAG

48 X 100 (FLAT LAYOUT)

INSERT ½” X 8”

CARRIAGE BOLTS

THROUGH BASE

CENTER FOIL ENVELOPE ON BASE

AND USE HOLE LOCATIONS TO

FABRICATE FOIL BAG IN ACCORDANCE

WITH MIL-DTL-6060E

48 X 80 PAPER

CENTER PAPER

OVER FOIL AND USE

½” BOLTS TO

PUNCTURE PAPER

DDDD FFOORRMM 22116699,, JJUUNN 11999977 ((EEGG)) PPRREEVVIIOOUUSS EEDDIITTIIOONNSS AARREE OOBBSSOOLLEETTEE PPaaggee 66 ooff 66

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

400/H0612 (0JKF0) TRANSMISSION, VEHICULAR 19207 AK16683511

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-668-3511 9-18-2018

30 X 80 X ¼ “ THICK

FOAM

48 X 80

PAPER

WRAP PAPER UP AND OVER XMSN,

SECURE WITH TAPE

SECURE XMSN TO BASE

WITH

½” WASHER, LOCK

WASHER & NUT

WRAP WITH OAM

CUSHIONING TO PREVENT

FOIL BAG PUNCTURES

VACUUM SEAL FOIL BAG

IN ACCORDANCE WITH

MIL-DTL-6060E