SPI 779.pdf
PDF 96 KB Posted
- Attached to
- Honeywell IPS Federal contract opportunity
- Solicitation number
- SPRDL1-19-R-0147
About this file
This special packaging instruction document outlines the preservation, packing, and marking requirements for part number 12336779, identified as a moisture trap. Specific instructions are provided for cleaning, drying, and packing the part in accordance with various military standards. The part must be cushioned and placed within bags and containers of defined sizes per the bill of materials. Proper inspection of the preservation, unit pack, and exterior packs is also required.
The related federal contract opportunity is a solicitation from the Defense Logistics Agency Land and Maritime for Honeywell International to provide an indefinite delivery/indefinite quantity contract for an unidentified product or service. The five-year IDIQ contract has a higher-level quality system requirement of ISO 9001:2015. The solicitation release date is January 3, 2020 with an offer due date of February 20, 2020, though actual dates may vary according to the final solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL119R0147-0001.pdf | ||
| SPRDL1-19-R-0147 Beta.Sam.Gov Solicitation.pdf | ||
| SPI 4085.pdf | ||
| SPI 818.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC/TB
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12336779 (19207) TRAP, MOISTURE 19207 AK12150498
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
4730-01-215-0498 07-09-2003 B
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 3.8 1.288 18.9 X 12.4 X 9.5
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 32 SEE NOTES
13. CLEANING
MIL-STD-2073-1D
14. DRYING
MIL-STD-2073-1D
15. PACKING
a. LEVEL A
MIL-STD-2073-1D AND NOTE E
b. LEVEL B
MIL-STD-2073-1D AND NOTE E
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE
ACCOMPANYING PAGES.
B. POSITION CUSHIONING, ITEMS 1A, 1B, AND 1C AROUND PART IN CONTAINER, ITEM 2. CUSHIONING TO BE LOCATED AS SHOWN ON PAGE 2. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
C. PLACE THE PREPARED PART INTO A BAG, ITEM 3, AND CLOSE THE BAG BY HEAT SEALING.
D. POSITION THE PREPARED PART INTO A CONTAINER, ITEM 4, AND CLOSE CONTAINER IN ACCORDANCE
WITH ASTM-D1974, METHOD 2B3.
E. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.
MIL-HDBK-774 MAY BE USED FOR GUIDANCE.
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
F. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH
MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12336779 (19207) TRAP, MOISTURE 19207 AK12150498
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
4730-01-215-0498 07-09-2003 B
BILL OF MATERIALS
ITEM
NUMBER
DESCRIPTION
SIZE
SPECIFICATION DATA
QTY.
1 CUSHIONING A-A-59136, CLASS 1, GRADE A, TYPE I.
1A 13-7/8 X 7-3/8 X 2 2 1B 11-3/8 X 7-5/8 X 2 2 1C 13-7/8 X 7-5/8 X 2 2
2 CONTAINER 18 X 11-1/2 X 7-3/4 ASTM-D5118, TYPE CF, CLASS D,
STYLE RSC, VARIETY SW, GRADE 200.
3 BAG 22 X 30 MIL-DTL-117, TYPE III, CLASS B. 1
4 CONTAINER 18-1/2 X 12 X 8-3/4 ASTM-D5118, TYPE CF, CLASS WR,
STYLE RSC, VARIETY SW, GRADE
W5c.
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
1A
(2 PLACES)1C
(2 PLACES)
1B
(2 PLACES)
File details come from the government source that posted it. Updated .