I.P-2 ERH737-6007A16 PC 14.pdf

This is a technical engineering drawing detailing a cable hanger tray component. The drawing is designated as Detail 9-1-7E and specifies part number H7376007-014 with a thickness of .375 inches. The component is constructed with composite material, specifically LWMAA GRP (Glass Reinforced Plastic), as indicated in the material specifications.

The drawing provides comprehensive dimensional specifications for the cable hanger tray, with overall length of 13.50 inches and width of 11.30 inches. The design includes multiple cable routing slots arranged along the length, with specific spacing and depth measurements. Key features include two circular holes with a diameter of 1.06 inches at the ends, rounded corners with a radius of .50 inches (typical), and various mounting slots with typical spacing of 1.30 inches. The drawing references Note 7013 and specifies GRP material per standards 96169/H737-6007 014, 96169/EB-4331, and 96169/EB-4274. The tray design accommodates cable management with standardized hole and slot configurations suitable for aerospace or military applications, as evidenced by the specification numbering convention.