Data Requirement Exhibit B.pdf
PDF 89 KB Posted
- Attached to
- Hex Socket Head Cap Screws
- Solicitation number
- SPMYM327Q1105
About this file
This is a Contract Data Requirements List (CDRL) for federal contract 62874041-2 covering hex socket (cylindrical) head cap screws. The CDRL specifies two data items that the contractor must submit to the requiring office (Code 245) as part of contract performance.
Data Item B001 requires submission of a Certificate of Compliance certifying quality compliance, based on DI-MISC-81356A authority, with reference to contract Section C.2. Data Item B002 requires Certification Data/Report documenting chemical and mechanical certification per DI-MISC-82386, with reference to contract Section C.3. Both data items must be submitted one time with the material delivery under separate shipment numbers and are subject to DD 250 requirements and payment clauses 252.232-7006, 252.232-7003, or 52.232-36. The B002 certification must include actual test results for all chemical and mechanical tests specified in the specification, presented as quantitative data in units required by the specification. Fastener certification must demonstrate testing of the correct number of specimens using new untested fasteners for wedge tensile and yield strength testing. Additional marking and certification requirements for controlled industrial material apply per contract specifications. The CDRL was prepared by Conrad Gagne (Code 245.2C1) on 10/14/2026 and approved by Edward Walsh (Code 245.2) on 10/23/2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Clauses - Full Text Provisions and Clauses.pdf | ||
| RFQ SPMYM327Q1105.pdf | ||
| Data Requirement Exhibit A.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C1-0082-27 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
HEX SOCKET (CYLINDRICAL) HEAD CAP
SCREW
E. CONTRACT/PR NO.
62874041-2
F. CONTRACTOR
1. DATA ITEM NO.
B001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
14. DISTRIBUTION
b. COPIES
7. DD 250 REQ
DD
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
a. ADDRESSEE
DRAFT FINAL
REG REPRO8. APP. CODE
N/A
9. DIST
STATEMENT
REQUIRED
A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
133.2 0 1 0
0 0 016 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
15. TOTAL 0 1 0
1.DATA ITEM NO.
B002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
14. DISTRIBUTION
b. COPIES
7. DD 250 REQ
DD
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
a. ADDRESSEE
DRAFT FINAL
REG REPRO8. APP. CODE
N/A
9. DIST
STATEMENT
REQUIRED
A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
133.2 0 1 0
0 0 0
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
15. TOTAL 0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 6797 245.2C1
H. DATE
10/14/2026
I. APPROVED BY 245.2
10/23/2026
X EDWARD WALSH
Signed by: d2996fac-52c0-46b8-8d1d-cb996952148b
J. DATE
10/23/2026
File details come from the government source that posted it. Updated .