Data Requirement Exhibit A.pdf
PDF 69 KB Posted
- Attached to
- Hex Socket Head Cap Screws
- Solicitation number
- SPMYM327Q1105
About this file
This is a Contract Data Requirements List (CDRL) for federal contract 62874041-2, specifying data deliverables required for the procurement of hex socket (cylindrical) head cap screws.
The CDRL contains two data items that must be submitted by the contractor to the requiring office (Code 245). Data Item A001 is a Certificate of Compliance certifying quality compliance, referenced to section C.2 of the contract and based on data item description DI-MISC-81356A. Data Item A002 is a Certification Data/Report for chemical and mechanical certification, referenced to section C.3 and based on DI-MISC-82386. Both data items are required to be submitted one time with the material delivery under separate shipment numbers. The certification data must include actual quantitative test results in units specified by the applicable specification, with evidence of testing the correct number of specimens using new, untested fasteners for wedge tensile and yield strength testing. The requirements also reference contract provisions on marking and certification for controlled industrial material. Payment and submission procedures are governed by clauses 252.232-7006, 252.232-7003, or 52.232-36. The CDRL was prepared by Conrad Gagne (Code 245.2C1) on October 14, 2026, and approved by Edward Walsh (245.2) on October 23, 2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Clauses - Full Text Provisions and Clauses.pdf | ||
| RFQ SPMYM327Q1105.pdf | ||
| Data Requirement Exhibit B.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C1-0082-27 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
HEX SOCKET (CYLINDRICAL) HEAD CAP
SCREW
E. CONTRACT/PR NO.
62874041-2
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
14. DISTRIBUTION
b. COPIES
7. DD 250 REQ
DD
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
a. ADDRESSEE
DRAFT FINAL
REG REPRO8. APP. CODE
N/A
9. DIST
STATEMENT
REQUIRED
A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
133.2 0 1 0
0 0 016 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
14. DISTRIBUTION
b. COPIES
7. DD 250 REQ
DD
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
a. ADDRESSEE
DRAFT FINAL
REG REPRO8. APP. CODE
N/A
9. DIST
STATEMENT
REQUIRED
A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
133.2 0 1 0
0 0 0
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical &
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
15. TOTAL 0 1 0
G. PREPARED BY
CONRAD GAGNE Ext: 6797 245.2C1
H. DATE
10/14/2026
I. APPROVED BY 245.2
10/23/2026
X EDWARD WALSH
Signed by: d2996fac-52c0-46b8-8d1d-cb996952148b
J. DATE
10/23/2026
File details come from the government source that posted it. Updated .