6288-7904 - MATERIAL ORDERING DATA.pdf
PDF 118 KB Posted
- Attached to
- METAL BAR
- Solicitation number
- SPMYM227Q0118
About this file
This is a Material Ordering Data sheet for rolled structural steel bars conforming to ASTM-A6/A6M specifications. The document specifies procurement requirements for a 7-inch diameter steel bar in 10-foot lengths with a total quantity of 20 feet. The material shall be ASTM A36/A36M grade structural steel, as-rolled condition, with no special grade, class, or type designations required. The specification referenced is dated 27 APR 2026 and must be at the latest revision at the time of award. The contract identification includes IDN N4523A 6288-7904, ICN 88MSM00001, KO 000, and KOI 000.
Key requirements include mechanical property test reports for each heat supplied in accordance with ASTM specification Section 14. Packaging, marking, and loading for shipment must comply with MIL-STD-129 per DLA Procurement Note C20, and all unit, intermediate, and shipping containers require marking in accordance with this standard. All supplementary requirements are not required, including vacuum treatment, product analysis, post-weld heat treatment, additional tension testing, impact testing, ultrasonic examination, and copper-bearing steel specifications. No special requirements, repair welding, or end-use-specific requirements apply. The document notes that copper-bearing steel is acceptable as an alternative. The material ordering data was prepared by Material and Technical Support under Code 244.4.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM227Q01180001.pdf | ||
| 6288-7904 - CDRL EXHIBIT A.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-A6/A6M
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 6288-7904
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 4 Ordering Data
ASTM-A6/A6M, STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR
ROLLED STRUCTURAL STEEL BARS, PLATES, SHAPES AND SHEET PILING,
dated 27 APR 2026.
4.1.1 Select ASTM product specification designation and year-date:
A36/A36M
Select One (cont.):
4.1.2 Name of structural product: BAR
4.1.3 Shape designation, or size and thickness or diameter: 7” DIA.
4.1.4 Grade, Class and Type designation, if applicable:
Grade: N/A
Class: N/A
Type: N/A
4.1.5 Condition, if other than as-rolled (see Section 6):
N/A
4.1.6 Quantity (weight [mass] or number of pieces):
20 FEET
4.1.7 Length: 10 FT. LENGTHS.
4.1.8 Exclusion of either structural product produced from coil or structural product from coil or structural product produced from an as-rolled structural product, if applicable (see 5.4 and Appendix X1):
N/A
4.1.9 Heat treatment requirements (see 6.2 and 6.3), if any:
N/A
4.1.10 Testing for fine austenitic grain size (see 8.3.2):
IS NOT REQUIRED.
4.1.11 Mechanical property test report requirements (see Section 14)
IS required.
Test report for each heat supplied is required IAW spec Section 14.
4.1.12 Special packaging, marking, and loading for shipment requirements (see Section
19): IAW MIL-STD-129
4.1.13 Supplementary requirements, if any, including any additional requirements called for in the supplementary requirements. Checked below apply:
S1. Vacuum Treatment
NOT REQUIRED.
S2. Product Analysis
NOT REQUIRED.
S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons
NOT REQUIRED.
S4. Additional Tension Test
NOT REQUIRED.
S5. Charpy V-Notch Impact Test
NOT REQUIRED.
S6. Drop-Weight Test (for Material 0.625 in. [16 mm] and over in Thickness)
NOT REQUIRED.
S8. Ultrasonic Examination
NOT REQUIRED.
S15. Reduction of Area Measurement
NOT REQUIRED.
S18. Maximum Tensile Strength
NOT REQUIRED.
S23. Copper-Bearing Steel (for improved atmospheric corrosion resistance)
NOT REQUIRED.
S26. Subdivided Material—Marking of Individual Pieces
NOT REQUIRED.
S27. Restrictive Plate Flatness
NOT REQUIRED.
S28. Fine Grain Practice
NOT REQUIRED.
S29. Fine Austenitic Grain Size
NOT REQUIRED.
S30. Charpy V-Notch Impact Test for Structural Shapes: Alternate Core Location
NOT REQUIRED.
S31. Maximum Carbon Equivalent for Weldability
NOT REQUIRED.
S32. Single Heat Bundles
NOT REQUIRED.
4.1.14 End use, if there are any end-use-specific requirements (see 18.1, 11.3.4, Table
22 or Table A1.22, and Table 24 or Table A1.2):
N/A
4.1.15 Special requirements, if any (see 1.10): N/A
4.1.16 Repair welding requirements, if any (see 9.5): N/A
Additional data requirements: N/A
Note: Copper-Bearing Steel is also acceptable.
All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Material and Technical Support
Code: 244.4
File details come from the government source that posted it. Updated .