SPMYM2-20-Q-2805 (SALIENT CHARACTERISTICS) OZONE INJECTION SYSTEM.pdf
PDF 158 KB Posted
- Attached to
- PORTABLE OZONE INJECTION SCRUBBER SYSTEM Federal contract opportunity
- Solicitation number
- SPMYM2-20-Q-2805
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM2-20-Q-2805 (SOLICITATION) PORTABLE OZONE INJECTION SCRUBBER SYSTEM.pdf | ||
| SPMYM2-20-Q-2805 (CDRLS) Ozone Injection Scrubber System.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for a Portable Ozone Injection Air Scrubber System
Project # 819-834 1 Aug 20
1. One (1) Portable Ozone Injection Air Scrubber System with an All-Weather Enclosure (cabinet), such as an Ozone Solution, Inc. WSE-80, Enclosed Ozone Injection System, or equivalent. This Ozone Injection System shall be a “Turn-Key and a Stand-Alone” system, and shall include the following minimum (or equal) features:
a. All-weather SS316 stainless steel Nema 4x weather tight enclosure (cabinet) and mounted to a portable skid must not exceed 72 inch (W), 60inch (L), and 90 inch (H) in overall dimensions.
b. Transformer to convert 15 AMPS of 480VAC, 3-phase, 60 Hz of Delta Pier available power to 30 AMPS of 240 VAC, 3-phase, 60 Hz electrical power
c. Control System & Panel
d. Main Disconnect Panel
e. Ozone Injection System
f. Post initial air filter system
g. Post air dryer and pre-ozone generator
h. Ozone Generator which will be maintenance free, will NOT require a chiller system
i. Ozone Flow Regulating Valve
j. Oxygen Flow Meter
k. Oxygen Pressure Gauge
l. Cooling Water Flow Meter
m. High Pressure Check Valve and a Low Pressure Check Valve
n. Venturi Injector
o. System pumps will be rated as a horizontal multistage pump, continuous duty, close-coupled type, self-priming
p. SS 304 stainless steel 40-50 gallon Contact Tank, with baffles, which will be used to mix the ozone with the water stream
q. Contact Tank shall have a Tank Pressure Gauge
r. A design that will vent off-gassed oxygen and ozone, and both of these vented gases must be processed through an Ozone Destruct Unit
s. Integrated Water Trap
t. A 1 ½ inch Water Inlet and a 1 ½ inch Water Outlet female quick-disconnect couplings
u. Flow Switch
v. Portable Ozone Detector with Alarms
w. Total Assembly will be constructed from and assembled with Ozone Compatible elastomers, metals, and miscellaneous materials
2. Maintenance/Repair Manuals (three (3) hard copies)
3. NRTL Certification Report
4. Technical Data for Potential Environmental Permitting Requirements
5. Contractor Provide Design
6. Air Sampling (mock up phase and initial on-site test phase)
7. Warranty (One (1) year)
| Salient Characteristics for a |
| 1. One (1) Portable Ozone Injection Air Scrubber System with an All-Weather Enclosure (cabinet), such as an Ozone Solution, Inc. WSE-80, Enclosed Ozone Injection System, or equivalent. This Ozone Injection System shall be a “Turn-Key and a Stand-Alon... |
File details come from the government source that posted it. Updated .