Attachment 1 Updated - 8-23.pdf
PDF 69 KB Posted
- Attached to
- 3" Fracking Hose Federal contract opportunity
- Solicitation number
- SPMYM123Q0100
About this file
This document outlines technical specifications for 3-inch discharge hose assemblies to be used with freshwater and saltwater. The hose must have a minimum working pressure of 350 PSI and maximum of 450 PSI, with a burst pressure of at least 16,000 PSI. Each 50-foot hose assembly is required to have specific camlock couplings permanently attached at both ends, as well as caps and plugs installed. The hose material must be able to withstand temperatures from -40 to 200 degrees Fahrenheit and be resistant to weather, oil, solvents, and mild acids. Additional requirements include permanent markings and manufacturer certification of hydrostatic testing at 600 PSIG for 30 minutes with no leaks. Samples may be requested for testing from offerors. Palleted hose assemblies must meet the specifications of the Defense Logistics Agency Land and Maritime under solicitation number SPMYM123Q0100.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM123Q0100 Amendment to ext.pdf | ||
| Attachment 1.pdf | ||
| SPMYM123Q0100 1449.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
R: ITEM NAME: 3” X 50’ DISCHARGE HOSE ASSEMBLY, SALTWATER,
FRESHWATER
ORDERING DATA:
• 3” I.D. X 3.73” O.D.
• HOSE SHALL HAVE A WORKING PRESSURE OF 350 PSI MINIMUM AND
450 PSI MAXIMUM
• HOSE SHALL HAVE A MINIMUM 16,000 PSI BURST PRESSURE
• 1.90 - 2.00 LBS MAXIMUM WEIGHT PER FOOT WITHOUT COUPLING
• SHALL HAVE A TEMPERATURE RATING OF -40 DEGREES (F) TO 200
DEGREES (F)
• SHALL BE WEATHER, OIL, SOLVENT, AND MILD ACID RESISTANT
• SHALL HAVE NITRILE BLEND RUBBER WITH UHMPE WRAPPED FINISH
COVER.
• SHALL HAVE A NITRILE RUBBER INNER TUBE.
• SHALL HAVE HIGH TENSILE DUAL STATIC WIRE PLIES (MINIMUM OF
FOUR (4) FOR REINFORCEMENT.
• TO BE SUPPLIED IN 50 FOOT LENGTHS (+12” / -12”)
• EACH HOSE ASSEMBLY SHALL HAVE THE FOLLOWING ADAPTERS ON
EACH END, CONNECTED TO THE HOSE FITTINGS: 3” MALE HEAVY
DUTY CAMLOCK X HOSE SHANK (PT COUPLING P/N: 1200530HG W/
30EHD BRASS BODY) ON ONE END AND 3” FEMALE HEAVY DUTY
CAMLOCK X HOSE SHANK (PT COUPLING P/N: 1200330HG W/ 30CHD
BRASS BODY) ON THE OTHER END.
NOTE: EACH COUPLING SHALL BE PERMANTLY/MECHANICALLY
ATTACHED BY INTERNALLY EXPANDED, UTILIZING A STAINLESS
STEEL FERRULE IN ACCORDANCE WITH THE COUPLING
MANUFACTURE RECOMMENDATION.
• EACH ASSEMBLY SHALL HAVE A CAM AND GROOVE CAP AND PLUG
INSTALLED FOR CLEANLINESS.
NOTE: MATERIAL FOR CAP PLUG TO BE OTHER THAN STEEL OR
ALUMUNUM. PLASTIC CAPS AND PLUGS ARE ACCEPTABLE.
• EACH HOSE ASSEMBLY SHALL HAVE, AT A MINIMUM, THE MFG’S
NAME, CONTRACT NUMBER AND PRESSURE RATING ON LAYLINE IN
PERMANENT INK OR MOLDED INTO COVERING.
• SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE
ASSEMBLIES (HOSE AND FITTING) HAVE BEEN HYDROSTATICALLY
TESTED AT 600 PSIG WITH CLEAN, FRESH WATER FOR 30 MINUTES
WITH ZERO LEAKS, WEEPS, END FITTING SLIPPAGE AND/OR BULGES.
• A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING
276, AND A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH
CONTRACT.
• HOSE SHALL BE PARKER 7311NXT OR EQUIVALENT.
• AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD
RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR
TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS
DURING EVALUATION PROCESS.
• HOSE MUST BE PALLETIZED
• CODE 269 SHALL REVIEW OFFEROR’S SPECIFICATIONS PRIOR TO
AWARD.
File details come from the government source that posted it. Updated .