Attachment 1.pdf
PDF 123 KB Posted
- Attached to
- 3" Fracking Hose Federal contract opportunity
- Solicitation number
- SPMYM123Q0100
About this file
This document outlines technical specifications for a 3-inch discharge hose assembly for use in saltwater and freshwater applications. The hose must have a working pressure between 350 and 450 PSI with a minimum burst pressure of 16,000 PSI. Additional requirements include a maximum weight of 1.90 to 2.00 pounds per foot, a temperature rating of -40 to 200 degrees Fahrenheit, and resistance to weather, oil, solvents and mild acids. The hose and couplings must be permanently attached and include identification markings and certification of hydrostatic testing. The related federal contract opportunity is solicitation number SPMYM123Q0100 for 3-inch fracking hoses to be procured by the Defense Logistics Agency Land and Maritime.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 1 Updated - 8-23.pdf | ||
| SPMYM123Q0100 Amendment to ext.pdf | ||
| SPMYM123Q0100 1449.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
: ITEM NAME: 3" DISCHARGE HOSE ASSEMBLY, SALTWATER,
FRESHWATER
• 3" I.D. X 3. 73" O.D.
ORDERING DATA:
• HOSE SHALL HA VE A WORKING PRESSURE OF 350 PSI MINIMUM AND
450 PSI MAXIMUM
• HOSE SHALL HA VE A MINIMUM 16,000 PSI BURST PRESSURE
• 1.90 - 2.00 LBS MAXIMUM WEIGHT PER FOOT WITHOUT COUPLING
• SHALL HA VE A TEMPERATURE RA TING OF -40 DEGREES (F) TO 200
DEGREES (F)
• SHALL BE WEATHER, OIL, SOLVENT, AND MILD ACID RESISTANT
• SHALL HA VE NITRILE BLEND RUBBER WITH UHMPE WRAPPED FINSISH
COVER.
• SHALL HA VE A NITRILE RUBBER INNER TUBE.
• SHALL HA VE HIGH TENSILE DUAL STATIC WIRE PLIES (MINIMUM OF
FOUR (4) FOR REINFORCEMENT.
• TO BE SUPPLIED IN 50 FOOT LENGTHS (+12" / -12")
• HOSE MUST HA VE A MALE COUPLING (AA59326/2A-8-B) ON ONE END
AND A FEMALE COUPLING (AA59326/6A-8-B) ON THE OTHER END.
COUPLINGS TO CAM-LOCKING, QUICK-CONNECT TYPE. COUPLING
MATERIAL SHALL BE RED BRASS ALLOY C84400 ONLY OR EQUIVALENT.
NOTE: EACH COUPLINGS SHALL BE PERMANTLY/MECHANICALLY
ATTACHED BY EXTERNAL CRIMPING, UTILIZING A STAINLESS STEEL
CRIMP FERRULE IN ACCORDANCE WITH COUPLING MANUFACTURER'S
RECOMMENDATION.
• EACH ASSEMBLY SHALL HA VE A CAM AND GROOVE CAP AND PLUG
INSTALLED FOR CLEANLINESS.
NOTE: MATERIAL FOR CAP PLUG TO BE OTHER THAN STEEL OR
ALUMUNUM. PLASTIC CAPS AND PLUGS ARE ACCEPTABLE.
• EACH HOSE ASSEMBLY SHALL HA VE, AT A MINIMUM, THE MFG'S
NAME, CONTRACT NUMBER AND PRESSURE RATING ON LA YLINE IN
PERMANENT INK OR MOLDED INTO COVERING.
• SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE
ASSEMBLIES (HOSE AND FITTING) HA VE BEEN HYDROSTATICALL Y
TESTED AT 600 PSIG WITH CLEAN, FRESH WATER FOR 30 MINUTES
WITH ZERO LEAKS, WEEPS, END FITTING SLIPPAGE AND/OR BULGES.
• A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING
276, AND A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH
CONTRACT.
ATTACHMENT 1
File details come from the government source that posted it. Updated .