SPM1C1-08-X-0017.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE 17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

RFQ IFB RFP

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF.

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 3/2005)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITON IS

UNRESTRICTED OR

NAICS:

SIZE STANDARD:

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

OFFER

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS

EMERGING SMALL

BUSINESS

8(A)

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

SPM1C108-X-0017

Standard Form (SF) 1449 - Solicitation / Contract/Order for Commercial Items

CAUTION NOTICE

This solicitation includes domestic preference requirements as identified in the Berry Amendment.

Offers are cautioned that ALL components must be of domestic origin in compliance with clause 252.225-7012 - PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (MAR 2008) - See Page 77 .

Under Clause - 52.209-9P05 / IDENTIFICATION OF SOURCES FOR

ALL COMPONENTS FOR CLOTH/TEXTILE ITEMS (MAR 2006)

DSCP - See Page 58. Offerors must identify all subcontractors and demonstrate the flow down to the point of origin of component contents to evidence “domestic sourcing” requirements into all subcontracts. The successful offerors must also provide access to invoices and other documents demonstrating adherence to domestic content requirements.

The Government intends to evaluate quotations and award a contract without discussion with offerors. An Offeror’s initial proposal should contain the offeror’s best terms from a cost or price and technical standpoint. The Government reserves the right to conduct discussions if the Contracting Officer later determines it is necessary.

SOLICITATION RESPONSE SHEET FOR “NO OFFER”

Solicitation No: SPM1C1-08-X-0017 Closing Date and Time: July 18th 2008 by 3:00 PM Local Time

No Offer Submitted for Reason(s) Checked:

[ ] Cannot comply with specification

[ ] Cannot meet delivery requirement

[ ] No open production capacity at plant

[ ] Do not regularly manufacture or sell the type of items involved

[ ] Other (specify):

[ ] We do [ ] We do not desire to be retained on the mailing list for future procurements for the type of item(s) involved.

Name/Address of firm (include ZIP Code):

Type or print Name/Title of signer: _____________________________________

Signature: __________________________________________________________

TABLE OF CONTENTS FOR REQUEST FOR QUOTATIONS

Standard Form (SF) 1449 Solicitation/Contract/Order for Commercial Items

Continuation of any block(s) from SF 1449

COMMERCIAL ITEM DESCRIPTION / SPECIFICATION

AND REQUIRED DELIVERY TERMS

Contract Clauses

1. FAR 52.212-4 - Contract Terms and Conditions – Commercial Items

2. Addendum to FAR 52.212-4

3. FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items

4. DFARS 252.212-7001 - Contract Terms and Conditions Required to Implement Statutes or Executive orders Applicable to Defense Acquisition of Commercial Items

Solicitation Provisions

1. FAR 52.212-1 - Instructions to Offerors – Commercial Items

2. Addendum to FAR 52.212-1

3. FAR 52.212-2 - Evaluation – Commercial Items

4. Addendum to FAR 52.212-2

5. FAR 52.212-3 - Offeror Representations and Certifications – Commercial Items

6. Addendum to FAR 52.212-3 (e.g., certifications re Surplus Material, Buy American Act)

7. DFARS 252.212-7000 -Offeror Representations and Certifications – Commercial Items.

SPM1C1-08-X-0017

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS - SF 1449

(CONTINUATION SHEET)

1. Block 8 Offer Due Date/Local Time: July 18th 2008 by 3:00 PM Local Time

2. Block 9 (continued)

Mailed offers should be sent to:

Defense Logistics Agency Defense Supply Center Philadelphia Post Office Box 56667 Philadelphia, PA 19111-6667

Handcarried Offers should be delivered to:

Handcarried Offers include: In-Person delivery by contractor; or Fed Ex, Airborne, UPS, DHL, Emery, other commercial carrier; or USPS Express Mail, USPS Certified Mail.

Defense Supply Center Philadelphia Business Opportunities Office Building 36, 2nd Floor 700 Robbins Avenue Philadelphia, PA 19111-5092

Mark Your Request For Quotations With: SPM1C1-08-X-0037 Mark Package with Opening / Closing Date & Time: July 18th 2008 / 3:00 P.M. Local Time

Note: All handcarried offers are to be delivered between 8:00 a.m. and 4:00 p.m., Monday through Friday, except for legal federal holidays as set forth in 5 USC 6103.

Offerors using a commercial carrier service must ensure that the carrier service “handcarries” the package to the address specified above for handcarried offers prior to the scheduled opening/closing time. Package must be plainly marked ON THE OUTSIDE OF THE COMMERCIAL CARRIER’S ENVELOPE with the solicitation number, date, and time set forth for receipt of offers as indicated in Block 8 of the Standard Form 1449.

(CONTINUATION SHEET) (cont.)

Facsimile offers (if authorized; see “Addendum” to 52.212-1 (b)) or offer modifications/withdrawals should be transmitted to:

(215) 737-9216, (215) 737-8414, (215) 737-9300, -9301, -9302, or -9303.

-FACSIMILE OFFERS ARE NOT AUTHORIZED ON THIS RFQ-

3. Block 17a: Offeror’s assigned DUNS Number:____________________________.

(If you do not have a DUNS number, contact the individual identified in Block 7a or see 52.212-1, Instructions to Offerors—Commercial Items (paragraph j) for information on contacting Dun and Bradstreet.)

Offeror’s CAGE Code: ____________________________.

4. Block 17b: Remittance Address: (if different from Contractor/Offeror address in block 17a.)

Remit to address will only be used in the event of Electronic Funds Transfer Failure.

5. Are you registered in the Central Contract Registry (CCR)?

( ) YES ( ) NO

You will not be eligible for award if you are not registered. If you have previously registered, make sure that your registration has not expired.

(CONTINUATION SHEET)

1. Continuation of Blocks 19-24:

Schedule of Supplies/Services

5 Different Berets

1. Beret, Wool, Man’s, Army, Black w/Flashes MIN/MAX: 125,136**/375,408 8405-01-088-7805(s) AMD*: 40,862 x 9 months = 367,758 Cut Make & Trim Price: ___________ Total Dollar Value of GFM: _____.74____ Total Unit Price: ____________

GFM unit price for each Flash is $00.37 ea

(2) Flashes will be issued for each Beret NSN: 8455-01-480-4556

2. Beret, Wool, Man’s, Army, Rifle Green MIN/MAX: 2016**/6048 8405-00-082-5640(s) AMD*: 269 x 9 months =2421 Unit Price: ____________

3. Beret, Wool, Man’s, Army, Maroon MIN/MAX: 13,392**/40,176 8405-01-105-0414(s) AMD*: 2928 x 9 months = 26,352 Unit Price: ____________

4. Beret, Wool, Man’s, Lined, AF, Blue, Enlisted MIN/MAX: 2064**/6480 8405-01-453-8215(s) AMD*: 420 x 9 months = 3,780 Unit Price: ____________

5. Beret, Wool, Man’s, Lined, AF, White MIN/MAX: 1296**/3456 8405-01-252-5461(s) Unit Price: ____________ AMD*: 233 x 9 months = 2097

*AMD = Average monthly demand **The Government is only obligated to order the minimum quantity given on each item.

DELIVERY REQUIREMENTS

BERET, MAN'S, BLACK, W/FLASHES, ARMY

DELIVERY INCREMENTS & QUANTITIES

CLIN NSN SIZE DEST TOTAL

DAA* 150 DAA

DAA

0001 8405-01-088-7805 7 1/4 SC0102 27216 9072 9072 9072

0002 8405-01-088-7812 7 1/8 SC0102 25344 8448 8448 8448

0003 8405-01-088-7813 7 3/8 SC0102 23472 7824 7824 7824

0004 8405-01-088-7902 6 7/8 SC0102 22032 7344 7344 7344

0005 8405-01-089-0136 6 3/4 SC0102 1872 624 624 624

0006 8405-01-089-0137 7 SC0102 25200 8400 8400 8400

DELIVERY ORDER TOTAL 125136 41712 41712 41712

TOTAL SC0102 125136 41712 41712 41712

DELIVERIES:

41,712 EA TO BE DELIVERED 120 DAYS AFTER AWARD

41,712 EACH ADDITIONAL TO BE DELIVERED 150 DAYS AFTER AWARD

41,712 EACH ADDITIONAL TO BE DELIVERED 180 DAYS AFTER AWARD

GREEN BERET

MAN’S ARMY

DELIVERY INCREMENTS & QUANTITIES

NSN SIZE DEST TOTAL

DAA* 150 DAA 180 DAA

8405-00-082-5640 6 3/8 SC0102 288 96 96 96

8405-00-082-5641 6 1/2 SC0102 48 48 0 0

8405-00-082-5642 6 5/8 SC0102 48 48 0 0

8405-00-082-5643 6 3/4 SC0102 48 48 0 0

8405-00-082-5644 6 7/8 SC0102 48 48 0 0

8405-00-082-5645 7 SC0102 144 48 48 48

8405-00-082-5646 7 1/8 SC0102 384 96 144 144

8405-00-082-5647 7 1/4 SC0102 432 144 144 144

8405-00-082-5648 7 3/8 SC0102 384 96 144 144

8405-00-082-5650 7 5/8 SC0102 192 0 96 96

DELIVERY ORDER

TOTAL 2016 672 672 672

TOTAL SC0102 2016 672 672 672

672 EA TO BE DELIVERED 120 DAYS AFTER AWARD

672 EACH ADDITIONAL TO BE DELIVERED 150 DAYS AFTER AWARD

672 EACH ADDITIONAL TO BE DELIVERED 180 DAYS AFTER AWARD

* After the first delivery order, all subsequent delivery orders will be required to deliver in 90 days after the date of the order.

ITEM: BERET, MAN'S, MAROON, ARMY

DELIVERY INCREMENTS AND QUANTITIES

CLIN NSN SIZE DEST TOTAL 120 DAA* 150 DAA 180 DAA

0001 8405-01-105-0414 6 1/2 SC0102 576 192 192 192

0002 8405-01-105-0416 6 3/4 SC0102 528 144 192 192

0003 8405-01-105-0417 6 7/8 SC0102 912 336 288 288

0004 8405-01-105-0418 7 SC0102 3264 1104 1104 1056

0005 8405-01-105-0419 7 1/8 SC0102 2304 768 768 768

0006 8405-01-105-0420 7 1/4 SC0102 1440 480 480 480

0007 8405-01-105-0421 7 3/8 SC0102 1968 624 672 672

0008 8405-01-105-0422 7 1/2 SC0102 2400 816 768 816

DELIVERY ORDER

TOTAL 13392 4464 4464 4464

TOTAL SC0102 13392 4464 4464 4464

DELIVERIES:

4464 EA TO BE DELIVERED 120 DAYS AFTER AWARD

4464 EACH ADDITIONAL TO BE DELIVERED 150 DAYS AFTER AWARD

4464 EACH ADDITIONAL TO BE DELIVERED 180 DAYS AFTER AWARD

All Army Berets are to be shipped to the following location:

DESTINATION: SC0102 LION VALLEN INDUSTRIES

340 MOORE AVENUE

BUILDING 8

SUFFOLK VA 23434-3820

BERET, MAN'S, ENLISTED, BLUE, Air Force

CLIN NSN SIZE DEST TOTAL 120 DAA* 150 DAA 180 DAA

0001 8405-01-453-8215 7 1/8 SD0131 432 144 144 144

0002 8405-01-453-8224 6 7/8 SD0131 720 240 240 240

0003 8405-01-453-8231 6 5/8 SD0131 48 48 0 0

0004 8405-01-453-8233 7 3/8 SD0131 864 288 288 288

DELIVERY ORDER TOTAL 2064 720 672 672

TOTAL SC0102 2064 720 672 672

DELIVERIES:

720 EA TO BE DELIVERED 120 DAYS AFTER AWARD

672 EACH ADDITIONAL TO BE DELIVERED 150 DAYS AFTER AWARD

672 EACH ADDITIONAL TO BE DELIVERED 180 DAYS AFTER AWARD

* After the first delivery order, all subsequent delivery orders will be required to deliver in 90 days

ITEM: BERET, MAN'S, WHITE, Air Force

CLIN NSN SIZE DEST TOTAL 120 DAA* 150 DAA 180 DAA

0001 8405-01-252-5461 6 3/8 SD0131 48 48 0 0

0002 8405-01-252-5464 6 3/4 SD0131 48 48 0 0

0003 8405-01-252-5465 6 7/8 SD0131 96 0 48 48

0004 8405-01-252-5466 7 SD0131 192 48 48 96

0005 8405-01-252-5467 7 1/8 SD0131 192 48 96 48

0006 8405-01-252-5468 7 1/4 SD0131 192 48 48 96

0007 8405-01-252-5469 7 3/8 SD0131 144 48 48 48

0008 8405-01-252-5470 7 1/2 SD0131 240 48 96 96

0009 8405-01-252-5471 7 5/8 SD0131 48 48 0 0

0010 8405-01-252-5472 7 3/4 SD0131 48 48 0 0

0011 8405-01-252-5473 7 7/8 SD0131 48 0 48 0

DELIVERY ORDER TOTAL 1296 432 432 432

TOTAL SD0131 1296 432 432 432

Air Force Berets are to be shipped to the following location:

DESTINATION: SD0131 TRAVIS ASSOCIATION FOR THE BLIND

4509 FREIDRICH LANE

BUILDING 4, SUITE 402

AUSTIN, TX 78744-1812

* After the first delivery order, all subsequent delivery orders will be required to deliver in 90 days

SHIP TO INFORMATION:

3 monthly deliveries are required to start 120 days after date of award. Pricing should reflect shipping costs to the following locations.

Shipping Addresses:

SC0102 SD0131

Lion Vallen Industries Travis Association for the Blind 340 Moore Avenue 4509 Freidrich Lane Building 8 Building 4 - Suite 402 Suffolk, VA 23434-3820 Austin, TX 78744-1812

Inspection and Acceptance at Origin.

FOB: Destination.

Quality Systems Requirements: DPSCM 4155.3.

Acceleration is authorized.

First Article Sample Requirement: All samples shall be submitted to DSCP for Visual and Dimensional Examinations on or before 45 days after date of award.

FIRST ARTICLE REQUIREMENT

0001 Beret, Wool, Man’s, Army Black, w/flashes Quantity: 20 each Size 7 0002 Beret, Wool, Man’s, Army Rifle Green Quantity: 5 each Size 7 0003 Beret, Wool, Man’s, Army Maroon Quantity: 5 each Size 7 0004 Beret, Wool, Man’s, Lined, AF, Blue, Enlisted Quantity: 5 each Size 7 0005 Beret, Wool, Man’s, Lined, AF, White Quantity: 5 each Size 7

52.209-4 First Article Approval—Government Testing.

(a) The Contractor shall deliver (SEE SCHEDULE ABOVE ) within _45___ calendar days from the date of this contract to the Government at: DSCP Attention :Liz Bailey DSCP-FQCC- Bldg 6 – D075 700 Robbins Avenue Philadelphia, PA 19111-5092

The shipping documentation shall contain this contract number and the Lot/Item identification. The characteristics that the first article must meet and the testing requirements are specified elsewhere in this contract.

(b) Within _10____ calendar days after the Government receives the first article, the Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract.

A notice of conditional approval shall state any further action required of the Contractor. A notice of disapproval shall cite reasons for the disapproval.

(c) If the first article is disapproved, the Contractor, upon Government request, shall submit an additional first article for testing. After each request, the Contractor shall make any necessary changes, modifications, or repairs to the first article or select another first article for testing. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following a disapproval. The Contractor shall furnish any additional first article to the Government under the terms and conditions and within the time specified by the Government. The Government shall act on this first article within the time limit specified in paragraph (b) of this clause. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule or for any additional costs to the Government related to these tests.

(d) If the Contractor fails to deliver any first article on time, or the Contracting Officer disapproves any first article, the Contractor shall be deemed to have failed to make delivery within the meaning of the Default clause of this contract.

(e) Unless otherwise provided in the contract, the Contractor—

(1) May deliver the approved first article as a part of the contract quantity, provided it meets all contract requirements for acceptance and was not consumed or destroyed in testing; and

(2) Shall remove and dispose of any first article from the Government test facility at the

Contractor’s expense.

(f) If the Government does not act within the time specified in paragraph (b) or (c) of this clause, the

Contracting Officer shall, upon timely written request from the Contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay.

(g) The Contractor is responsible for providing operating and maintenance instructions, spare parts support, and repair of the first article during any first article test.

(h) Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the Contractor. Before first article approval, the costs thereof shall not be allocable to this contract for (1) progress payments, or

(2) termination settlements if the contract is terminated for the convenience of the Government.

(i) The Government may waive the requirement for first article approval test where supplies identical or similar to those called for in the schedule have been previously furnished by the Offeror/Contractor and have been accepted by the Government. The Offeror/Contractor may request a waiver.

(j) The Contractor shall produce both the first article and the production quantity at the same facility.

52.209-9P01 SPECIAL INSTRUCTIONS FOR FIRST ARTICLES AND ATTENDANT

DOCUMENTATION (MAY 2004) DSCP

(a) The contractor shall notify the cognizant Quality Assurance Representative (QAR) in sufficient time prior to the manufacture of the first article in order to accommodate an in-process verification of first article manufacture.

(b) The contractor shall notify the contracting officer and the QAR in writing at least 10 days prior to the date the first article will be presented to the QAR (before submission to the facility designated in paragraph (a) of FAR clause 52.209-4, FIRST ARTICLE APPROVAL--GOVERNMENT TESTING).

The same criteria for the acceptance of a Certificate of Compliance for the components of the entire contract quantity shall apply to the acceptance of the first article components unless specifically stated otherwise.

(c) All documentation, to include first article examination and testing reports, shall be submitted with the first article .

To - DSCP Attention :Liz Bailey DSCP-FQCC- Bldg 6 – D075 700 Robbins Avenue Philadelphia, PA 19111-5092

(d) When first article testing will be conducted at the contractor's plant, the contractor shall provide all facilities, equipment and personnel required to perform the examination and evaluation of the first article and the government reserves the right to charge the contractor for any additional costs of examination and evaluation caused by failure of the contractor to make available the first article or the required facilities, equipment or personnel, at the time specified in the above mentioned notice to the contracting officer.

(e) The first article will be reviewed for visual and dimensional conformance to the Product Description and any technical changes to that document that are found in the technical section of this document.

(f) Materials used in fabrication of first articles shall be in strict conformity with the applicable specification of the contract unless the contracting officer authorizes otherwise.

(g) Prior to the approval of the first article, the contractor shall not initiate any cutting or otherwise use of any government-furnished property beyond that required for the first article quantities.

(h) In the event the government determines that, as a basis for granting conditional first article approval, a corrective action plan is needed to confirm that first article deficiencies are readily correctable in production, the contracting officer will notify the contractor, in writing, of the requirement to submit such plan to the contracting officer within ten (10) working days of the government notification. The corrective action plan must clearly detail how the contractor intends to correct cited deficiencies. Should there be insufficient time to obtain a corrective action plan and comply with the timeframe for notification of first article acceptability in accordance with paragraph (b) of FAR clause

UPC CODES

ITEM 0001 - Beret, Wool, Man’s, Army, Black w/Flashes

PGC UPC NSN Nomen Size

1724 718020 120874 8405010887811 BERET,MAN'S 6 1-2 BK

1724 718020 120911 8405010890135 BERET,MAN'S 6 5-8 BK

1724 718020 120928 8405010890136 BERET,MAN'S 6 3-4 BK

1724 718020 120904 8405010887902 BERET,MAN'S 6 7-8 BK

1724 718020 120935 8405010890137 BERET,MAN'S 7 BK

1724 718020 120881 8405010887812 BERET,MAN'S 7 1-8 BK

1724 718020 120867 8405010887805 BERET,MAN'S 7 1-4 BK

1724 718020 120898 8405010887813 BERET,MAN'S 7 3-8 BK

1724 718020 120942 8405010890138 BERET,MAN'S 7 1-2 BK

1724 718020 120959 8405010890139 BERET,MAN'S 7 5-8 BK

1724 718020 120966 8405010890140 BERET,MAN'S 7 3-4 BK

1724 718020 306407 8405011031351 BERET,MAN'S 6 3-8 BK

1724 718020 488196 8405014802858 BERET,MAN'S 7 7/8 BK

1724 718020 583716 8405014974986 BERET,MAN'S 8 BK

1724 718020 483672 8405014975037 BERET,MAN'S 8 1-4 BK

ITEM 0002 Beret, Wool, Man’s, Army, Rifle Green

320 718020 120362 8405000825640 BERET,MAN'S 6 3/8 GR

320 718020 120416 8405000825645 BERET,MAN'S 7 GR

320 718020 120379 8405000825641 BERET,MAN'S 6 1-2 GR

320 718020 120386 8405000825642 BERET,MAN'S 6 5-8 GR

320 718020 120393 8405000825643 BERET,MAN'S 6 3-4 GR

320 718020 120409 8405000825644 BERET,MAN'S 6 7-8 GR

320 718020 120423 8405000825646 BERET,MAN'S 7 1-8 GR

320 718020 120430 8405000825647 BERET,MAN'S 7 1-4 GR

320 718020 120447 8405000825648 BERET,MAN'S 7 3-8 GR

320 718020 120454 8405000825649 BERET,MAN'S 7 1-2 GR

320 718020 120461 8405000825650 BERET,MAN'S 7 5-8 GR

320 718020 120478 8405000825651 BERET,MAN'S 7 3-4 GR

ITEM 0003 Beret, Wool, Man’s, Army, Maroon

PGC UPC NSN Nomen Size

1744 718020 120980 8405011050413 BERET,MAN'S 6 3-8 MA

1744 718020 120997 8405011050414 BERET,MAN'S 6 1-2 MA

1744 718020 121000 8405011050415 BERET,MAN'S 6 5-8 MA

1744 718020 121017 8405011050416 BERET,MAN'S 6 3-4 MA

1744 718020 121024 8405011050417 BERET,MAN'S 6 7-8 MA

1744 718020 121031 8405011050418 BERET,MAN'S 7 MA

1744 718020 121048 8405011050419 BERET,MAN'S 7 1-8 MA

1744 718020 121055 8405011050420 BERET,MAN'S 7 1-4 MA

1744 718020 121062 8405011050421 BERET,MAN'S 7 3-8 MA

1744 718020 121079 8405011050422 BERET,MAN'S 7 1-2 MA

1744 718020 121086 8405011050423 BERET,MAN'S 7 5-8 MA

1744 718020 121093 8405011050424 BERET,MAN'S 7 3-4 MA

ITEM 0004 Beret, Wool, Man’s, Lined, AF, Blue, Enlisted

2445 718020 008615 8405014538218 BERET,MAN'S 6 3\8

2445 718020 008639 8405014538226 BERET,MAN'S 6 1\2

2445 718020 008684 8405014538231 BERET,MAN'S 6 5\8

2445 718020 008646 8405014538227 BERET,MAN'S 6 3\4

2445 718020 008622 8405014538224 BERET,MAN'S 6 7\8

2445 718020 008592 8405014538212 BERET,MAN'S 7

2445 718020 008608 8405014538215 BERET,MAN'S 7 1\8

2445 718020 008677 8405014538230 BERET,MAN'S 7 1\4

2445 718020 008707 8405014538233 BERET,MAN'S 7 3\8

2445 718020 008660 8405014538229 BERET,MAN'S 7 1\2

2445 718020 008653 8405014538228 BERET,MAN'S 7 5\8

2445 718020 008714 8405014538234 BERET,MAN'S 7 3\4

2445 718020 008691 8405014538232 BERET,MAN'S 7 7\8

Item 0005 Beret, Wool, Man’s, Lined, AF, White

PGC UPC NSN Nomen Size

2011 718020 326764 8405012525461 BERET,MAN'S 6 3/8

2011 718020 326771 8405012525462 BERET,MAN'S 6 ½

2011 718020 326788 8405012525463 BERET,MAN'S 6 5/8

2011 718020 326795 8405012525464 BERET,MAN'S 6 ¾

2011 718020 326801 8405012525465 BERET,MAN'S 6 7/8

2011 718020 132563 8405012525466 BERET,MAN'S 7

2011 718020 326818 8405012525467 BERET,MAN'S 7 1/8

2011 718020 326825 8405012525468 BERET,MAN'S 7 ¼

2011 718020 326832 8405012525469 BERET,MAN'S 7 3/8

2011 718020 326849 8405012525470 BERET,MAN'S 7 ½

2011 718020 326856 8405012525471 BERET,MAN'S 7 5/8

2011 718020 326863 8405012525472 BERET,MAN'S 7 ¾

2011 718020 326870 8405012525473 BERET,MAN'S 7 7/8

BERET, WOOL, AIR FORCE AND ARMY

A-A-55184, DATED MARCH 10, 1993

PATTERN DATE: April 25, 1995

[X] SQUARE INCH TABLE ALLOWANCES

Below is the table of square inches by size for the item being procured and is hereby incorporated and made a part of this soliciatation and resultant is hereby incorporated and made a part of this soliciatation and resultant contracts.

This table shall be used to compute adjustments of basic material usage due to size changes Clause 52.245.9P20.

Changes in materials will be computed by multiplying the total calculated square inch adjustment for the basic material by the following percentage factors:

ITEM: BERET, MAN'S, WOOL

SIZE SQUARE INCHES

6 3/8 0290 6 1/2 0294 6 5/8 0298 6 3/4 0302 6 7/8 0306 7 0310 7 1/8 0314 7 1/4 0318 7 3/8 0322 7 1/2 0326 7 5/8 0330 7 3/4 0334 7 7/8 0339

8 TBD

SECTION C

TECHNICAL INFORMATION

0001 - BERET, WOOL, BLACK 1593, TYPE I, CLASS 10

ADDITIONAL INFORMATION FOR CR PD 01-09:

BERET, WOOL, BLACK 1593, ARMY, TYPE I,

CLASS 10,(UNLINED WITH FLASH)

PATTERN DATE(LINER): 11 FEBRUARY 2003

STANDARD SAMPLE IS AVAILABLE AND IS APPLICABLE

FOR SHADE ONLY - BLACK 1593

0002 - BERET, WOOL, RIFLE GREEN 297, TYPE II, CLASS 1

ADDITIONAL INFORMATION FOR CR PD 01-09:

BERET, WOOL, RIFLE GREEN 297, ARMY, TYPE II,

CLASS 1, (UNLINED WITHOUT FLASH)

PATTERN DATE(LINER): 11 FEBRUARY 2003

STANDARD SAMPLE IS AVAILABLE AND IS APPLICABLE

FOR SHADE ONLY - RIFLE GREEN 297

0003 - BERET, WOOL, MAROON 453, TYPE II, CLASS 7

ADDITIONAL INFORMATION FOR CR PD 01-09:

BERET, WOOL, MAROON 453, ARMY, TYPE II, CLASS 7,

(UNLINED WITHOUT FLASH)

PATTERN DATE(LINER): 11 FEBRUARY 2003

STANDARD SAMPLE IS AVAILABLE AND IS APPLICABLE

FOR SHADE ONLY - MAROON 453

0004- BERET, WOOL, BLUE 1561, TYPE III, CLASS 11

WITH FLASH INSIGNIA, FOR ENLISTED MEN

ADDITIONAL INFORMATION FOR CR PD 01-09:

BERET, WOOL, BLUE 1561, AIR FORCE ENLISTED,

TYPE III, CLASS 11, (LINED WITH FLASH)

PATTERN DATE(LINER): 11 FEBRUARY 2003

STANDARD SAMPLE IS AVAILABLE AND IS APPLICABLE

FOR SHADE ONLY - BLUE 1561

0005 - BERET, WOOL, WHITE 1610, TYPE IV, CLASS 9

ADDITIONAL INFORMATION FOR CR PD 01-09:

BERET, WOOL, WHITE 1610, AIR FORCE, TYPE IV

CLASS 9, (LINED WITHOUT FLASH)

PATTERN DATE(LINER): 11 FEBRUARY 2003

STANDARD SAMPLE IS AVAILABLE AND IS APPLICABLE

FOR SHADE ONLY, WHITE 1610 - PIECE NO. 04-03

Page 1, Para 2, Under "Types" add the following new type: "Type V-Lined with flash and nylon tape binding".

Page 2, Para 3.1, line 1, after "visible" delete "seams" and insert, " seam on the outside of the finished beret". Line 2, delete "3/4 +/- 1/8 inch" and substitute, "the lined berets shall have a ¾ inch felt cushion and unlined berets will use a ¼ inch felt cushion." Line 4, delete "Types III and IV" and substitute "Types III, IV, and V". Lines 5, 6, and 7 delete "The berets shell shall be bound with a leather binding that is stitched 1/16 to 1/8 inch from edge of binding through both the shell and the felt cushion and sewn grain side up using a 301 stitch type." and substitute "The types I, II, III, and IV berets shall be bound with a leather binding and the type V beret shell shall be bound with a 1 inch wide nylon tape binding. The bindings shall be stitched 1/16 to 1/8 inch from edge of binding through both the shell and felt cushion using a 301 stitch type. The leather binding shall be sewn with the grain side up." Line 7, delete "a ½ +/- 1/8 inch" and substitute "approximately a ½ inch" and after "notched" add "or angled cut opening". Lines 9 and 10, delete "the ends of the notched opening shall abut (+0, -1/8 inch) together." And substitute "The top ends of the bindings shall overlap." Third paragraph, Line 5, delete "Types I and III" and substitute "Types I, II, and V". Para 3.2, Lines 5 and 6, delete "ends of a continuous line of stitching shall overlap not less than ¼ inch".

Page 4, Para 3.3.3, line 3, delete "skiver grain" and insert "with an".

Page 5, before Para 3.3.4, add the following new paragraph: "3.3.3.2 Tape (Type V). The binding, for the Type V berets shall be 1 inch wide tape in accordance with Type III of MIL-PRF- 5038. The color shall be black and a good match to the beret shell material." Para 3.3.4, line 3, delete "." And add "the inside barrel diameter shall be 1/4 inch." Under Para 3.3.4, add Table IIA Eyelet Requirements:

"TABLE IIA. Eyelet Requirements Component Characteristic Test Method Determination Results Reported Eyelet Material Identification 1/ Diameter Gauge 4 Average to the nearest 0.001 inch Length Gauge 4 Average to the nearest 0.001 inch Finish 1/ Footnote:

1/. A certificate of compliance shall be acceptable for this characteristic."

Page 5, Para 3.3.7, In Title, delete "Types I and III" and substitute "Types I, III, and V" Page 6, Para 3.3.8, Line 1, delete "Types III and IV" and substitute "Types III, IV, and V". Para 3.4.1, line 2, after "inch" and add "to the right side".

Page 7, Para 3.5.1, line 1, delete "Types III and IV" and substitute "Types III, IV, and V". Table IV, under "Nomenclature" column for "Lining" material, first three lines delete "Types III and IV" and substitute "Types III, IV, and IV".

Pages 7-8, delete Para 3.6 and Table V including footnotes in their entirety and substitute the following:

"3.6 Finished measurements. The beret shall conform to the measurements in Table V.

Table V - Finished measurements, in inches.

SIZE Circumference A/ Crown Length B/ Crown Width C/ Front Quarter D/ Back Qaurter D/ Right and Left Quarter D/ A/ B/ C/ D/ D/ D/ 6-3/8 20-1/8 9-5/8 9-1/8 3 2-1/2 2-3/4 6-1/2 20-1/2 9-3/4 9-1/4 3 2-1/2 2-3/4 6-5/8 20-7/8 9-7/8 9-3/8 3 2-1/2 2-3/4 6-3/4 21-1/4 10 9-1/2 3 2-1/2 2-3/4 3-7/8 21-5/8 10-1/8 9-5/8 3 2-1/2 2-3/4 7 22 10-1/4 9-3/4 3 2-1/2 2-3/4

7-1/8 22-3/8 10-3/8 9-7/8 3 2-1/2 2-3/4 7-1/4 22-3/4 10-1/2 10 3 2-1/2 2-3/4 7-3/8 23-1/8 10-5/8 10-1/8 3 2-1/2 2-3/4 7-1/2 23-1/2 10-3/4 10-1/4 3 2-1/2 2-3/4 7-5/8 23-7/8 10-7/8 10-3/8 3 2-1/2 2-3/4 7-3/4 24-1/4 11 10-1/2 3 2-1/2 2-3/4

7-7/8 24-5/8 11-1/8 10-5/8 3 2-1/2 2-3/4 8 25 11-1/4 10-3/4 3 2-1/2 2-3/4 8-1/8 25-3/8 11-3/8 10-7/8 3 2-1/2 2-3/4 8-1/4 25-3/4 11-1/2 11 3 2-1/2 2-3/4 Tolerance ±3/16 ±1/2 ±3/8 N/A N/A N/A

Footnotes:

Note: All measurements shall be taken using a flexible metal tape measure and all measurements shall be taken after all packaging material has been removed A/ Circumference: Lay the beret flat on the table with head opening facing up. Measure the inside beret circumference around bottom edge of binding on the finished beret.

B/ Crown Length: Mark the front and back quarter locations in accordance with instructions in footnote D/. Lay beret flat on the table with head opening down, measure from Left Quarter mark to Right Quarter mark following the contour of the beret. Crown length is indicated by "B" in figure 1.

C/ Crown Width: Mark the Right and Left Quarter locations in accordance with instructions in footnote D/. Lay beret flat on the table with head opening down, measure from Left Quarter mark to Right Quarter mark following the contour of the beret. Crown width (perpendicular to the length measurement) is indicated by "C" in figure 1.

D/ Front, Back, Right, and Left Quarters. Identify location of each Quarter as indicated in figure

1. Front Quarter is indicated by "D", Back Quarter is indicated by "E", and the Right and Left Quarters are indicated by "F". Measure the length (from Table V) of each quarter from bottom edge of binding. Mark the finished location of each quarter with a straight pin."

Page 9, Para 5.2, under "Defect" for "Material and Workmanship", line 1, delete "leather binding" and substitute "binding". Under "defect" for "Binding", add the following to the end of the paragraph: "Material not as specified". Under "Examination" for "Lining", delete "Types III and IV" and substitute "Types III, IV, and V". Under "examination" for "leather", delete "leather" and insert ""Leather (Types I, II, III, and IV)". Under "defect" for "Leather", third paragraph, delete "Sweatband made from corrected or embossed grin leather." and substitute "Binding made from other than full grain leather." Under "Examination" for "flash" delete "Type I and III" and substitute "Types I, III, and V". Under "Examination" column "Eyelet, line 2 of Defect, after "by" add "more than". Under "Examination" column "Eyelet" add to the Defect column "Holes in eyelet protector not aligned with eyelet by more than 1/8 inch."

Page 13, delete figure 2 and insert new figure 2.

Page 10, Para 6.1 Preservations, packing and marking: Add "Plastic bags shall be sealed."

Preservation: Each beret shall have a cardboard insert conforming to finished dimensions, width and length of table V. There shall be a hole through the center for removal when taking finished dimensions. Unit Packing: Each beret shall be inserted in a flat style, clear polyethylene bag measuring 12 by 11 ½ inches. The unsealed opening shall be the smaller dimension of bag.

Intermediate Packs: Twelve (12) berets of one size and class only shall be packed flat in an intermediate paper board box conforming to style RSC, type CF variety SW of class, domestic, grade 125 of D-5118. Box closure shall be in accordance with method II as specified in the appendix of D-5118. Inside dimensions of box shall be 11 ½ inches in length, 11 inches in width, and 7 ½ inches in depth. Packing: Forty-eight (48) berets of one size and class only (four intermediate packs) shall packed in snug fitting fiberboard shipping container conforming to ASTM-D-5118, Type CF, Style RSC, grade 175, Variety SW, Class Domestic. This container shall have dimensions to accommodate four intermediate packs, with length of intermediate paperboard box standing. (Method of closure shall be in accordance with ASTM-D-1974, 2A2, figure 1 or as an alternate 2B6 or 2B7, figure 3.

(Ref. W1724)

DELETE CURRENT "BARCODE LABEL/TAG"

REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG. EACH ITEM SHALL BE INDIVIDUALLY

BAR-CODED WITH A PAPER TAG FOR PERSONAL

CLOTHING ITEMS. THE PAPER USED FOR THE TAGS

SHALL BE STANDARD BLEACHED SULFATE HAVING A

BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH

FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT

PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.

THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE

A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC)

ASSIGNED FOR ALL NSNS BY THE GOVERNMENT.

THE INITIAL "UPC" MUST APPEAR BENEATH THE

CODE. THE BAR CODES FOR NSN AND UPC SHALL BE

A MEDIUM TO HIGH DENSITY AND SHALL BE

LOCATED SO THAT THEY ARE COMPLETELY VISIBLE

ON THE ITEM WHEN IT IS FOLDED AND PACKAGED

AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE

NO DAMAGE TO THE ITEM.

PACKAGING SECTION. ADD THE FOLLOWING:

NOTE: UNIVERSAL PRODUCT CODE INFORMATION

THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE

(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON

WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/

TAGS:

BAR CODE OMITTED OR NOT MINOR A

READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) MINOR A

OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM MINOR A

CAUSES DAMAGE TO THE ITEM MAJOR

APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF

DOCUMENTS IS APPLICABLE TO THIS PROCUREMENT:

ADDITIONAL INFORMATION FOR COMMERCIAL AQL'S:

AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS (CID'S):

VISUAL - GENERAL INSPECTION LEVEL II, AQL - 1.0

DIMENSIONAL - SPECIAL INSPECTION LEVEL S2, AQL - 2.5

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE USE OF "SAMPLING

PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES", ANSI/ASQC Z1.4

(Ref. T1921 - May 18, 2006)

ADDITIONAL INFORMATION FOR A-A-52104:

A-A-52104 IS CANCELLED WITHOUT REPLACEMENT

NOTE: NOTICE 1, DTD 5/20/98, A-A-52104 IS

CANCELLED.

ADDITIONAL INFORMATION FOR A-A-52106:

INTERIM CHANGES TO A-A-52106:

PAGE 1, UNDER ABSTRACT. AFTER "THE CLASS 3 CLOTH IS INTENDED FOR USE AS

LINING MATERIAL IN DRESS COATS." ADD "CLASS 4 CLOTH IS INTENDED TO BE

USED AS A GARMENT LINING. CLASS 5 CLOTH IS INTENDED FOR USE AS A

NECKTIE AND NECKTAB OUTERSHELL FABRIC."

PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT WEIGHT 2.4 OZ; 2/1 RIGHT HAND

TWILL USING 100% FILAMENT POLYESTER SINGLE PLY YARNS FOR BOTH CLASS 4

AND CLASS 5.

CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE TWILL

PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD PAGE 1, GENERAL DESCRIPTION.

LINE 5 AFTER "YARNS" ADD "THE CLASS 4 CLOTH SHALL BE A TW0 UP-ONE DOWN

RIGHT HAND TWILL. THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN

HERRINGBONE TWILL. THE YARNS FOR CLASS 4 CLOTH SHALL BE SINGLE PLY

WITH A NOMINAL DENIER OF 70 FOR THE WARP YARNS AND 150 FOR THE FILLING

YARNS.

PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER CLASS 3" ADD INFORMATION FOR

"CLASSES 4 AND 5"

CHARACTERISTIC CLASS 4 CLASS 5

MATERIAL CONTENT, PERCENT:

POLYESTER 100% 100%

COTTON 0 0

RAYON 0 0

COLORFASTNESS TO:

PERSPIRATION GOOD GOOD

SUBLIMATION GOOD GOOD

WET DRY-CLEANING GOOD GOOD

CROCKING (MIN.) 3.5 3/ 3.5 3/

(BLACK OR DARK

BLUE COLORS) 1.0 3/ 1.0 3/

LABILE SULFUR CONTENT 4/ 4/

WEIGHT, OZ. /SQ. YD. (min.) 2.4 3.0

YARNS PER INCH (MIN.)

WARP 124 140

FILLING 76 75

BREAKING STRENGTH POUNDS (MIN.)

WARP 140 160

FILLING 110 130

TEARING STRENGTH POUNDS (MIN.)

WARP 5.0 14.0

FILLING 3.0 10.5

PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER "THE CLASS 5 CLOTH

SHALL BE A FIVE UP-ONE DOWN

"THE CLASS 5 CLOTH , USING 100 % FILAMENT HERRINGBONE TWILL." INSERT

"THE CLASS 6 CLOTH POLYESTER SINGLE PLY WITH BLACK 70 DENIER NOMINAL

WARP AND AIR FORCE BLUE 1622 150 DENIER NOMINAL FILLING YARNS." USING

100% FILAMENT POLYESTER SINGLE PLY WITH 70 DENIER NOMINAL IN THE WARP

AND 150 DENIER NOMINAL IN THE FILLING DIRECTION."

PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS:

TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING:

PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE FOLLOWING NEW

PARAGRAPH: "2.4 COLOR. THE COLOR OF THE FINISHED CLOTH SHALL BE AS

SPECIFIED (SEE 5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR SHADE.

CLASS 5 FABRIC IS MADE FROM DYED WARP AND DYED FILLING IN TWO

DIFFERENT COLORS. CLASS 5 FABRIC SHALL BE AIR FORCE SHADE BLUE 1622

ROLL #89-2.

(ref. T1514 - 5/23/06)

THREAD, POLYESTER CORE, COTTON OR POLYESTER-COVERED;

DATED JULY 31, 2006

ADDITIONAL INFORMATION FOR A-A-50199A DATED 7/31/2006:

SPECIAL NOTE: INTERIM STANDARD SAMPLE FOR FOR FOLIAGE GREEN 504

IS MIL-C-44436, ROLL #3729. (THE FOLIAGE GREEN 502 AREA OF THE PATTERN)

AND IS REFERENCED FOR SHADE ONLY. THIS STANDARD IS TEMPORARY UNTIL

FURTHER NOTICE. FOLIAGE GREEN 504 IS TO BE USED AS SPECIFIED BY

CONTRACT. THIS SHADE HAS BEEN APPROVED FOR TYPE I COLOR STANDARD.

(ref. T1064 - Feb. 27, 2007)

ADDITIONAL INFORMATION FOR A-A-52094A:

SIZE 16; TWIST Z; TYPE II; 16.0 OUNCES NOMINAL; GLAZED FINISH

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR MIL-C-43665:

INTERIM SPECIFICATION CHANGES TO MIL-C-43665C:

PAGE 2, PARA. 3.2, LINE 2, AFTER "TABLE 1 "

INSERT "OR TABLE 1A",

PAGE 3, TABLE 1, DELETE "SODIUM (4,5-DICHLORO,

2-CHLOROMETHANE SULFONAMIDO) 3',4'

6',TRICHLORO) DISHENYL ETHER (SEE 6.3.2) 0.26

0.60".

PAGE 3, AFTER TABLE 1, INSERT THE FOLLOWING NEW

TABLE:

"TABLE 1A, MOTHPROOFING COMPOUND.

% ON WEIGHT OF WOOL

MOTHPROOFING COMPOUND MIN. MAX.

EDOLAN ETS BEFORE DRYCLEANING

*(3-PHENOXYPHENYL) METHYL

PLUS OR MINUS CIS/TRANS 3-(2-,2-

DICCHLOROETHENYL)2,2-

DIMETHYLCYCLORPPANECARBOXYLATE. 0.058 0.40

CIS/TRANS RATIO:MAX.55% PLUS OR--AFTER DRY-CLEAN

MINUS CIS AND MIN.PLUS OR

MINUS TRANS.(*PERMETHRIN) 0.029 0.40

PAGE 3,PARA.3.4, LINE 3, AFTER "3.2" INSERT

"TABLE 1".

PAGE 3, AFTER PARA. 3.4 INSERT NEW PARAGRAPH AS

FOLLOWS:

"3.4.1 PERCENT OF MOTHPROOFING COMPOUND. THE

PERCENTAGES OF MOTHPROOFING COMPOUND SPECIFIED

IN TABLE 1A SHALL BE BASED ON WEIGHT OF PURE

COMPOUND ON THE WOOL FIBER CONTENT WHEN TESTED

BY HIGH PERFORMANCE LIQUID CHROMATOGRAPH (HPLC)

METHOD, OBTAINABLE FROM BAYER CORP., ROCK HILL,

SC 29732 (SEE 4.2.2)".

PAGE 5, PARAGRAPH 4.2.2,TABLE 11,DELETE THE

FOLLOWING:

CHARACTERISTIC REQUIREMENT TEST

. PARAGRAPH METHOD

"SODIUM (4,5-DICHLORO 2-CHLORO-METHANE

SULFONAMIDO)3',4',6',

TRICHLORO) DIPHENYL ETHER 3.4 4.3.1 3/ 4/"

AND SUBSTITUTE THE FOLLOWING:

CHARACTERISTIC REQUIREMENT TEST

PARAGRAPH METHOD "EDOLAN ETS

*(3-PHENOXYPHENYL 3.4.1 HPLC 7/

METHYL PLUS OR MINUS CIS/TRANS

3-(2,2-DICHLOROETHENYL)

2,2-DIMETHYL-CYCLOPROPANECARBOXYLATE

CIS/TTRANS RATIO: MAX.55%

PLUS OR MINUS CIS AND MIN.

PLUS OR MINUS TRANS.

*(PERMRTHRIN)"

PAGE 5, PARAGRAPH 4.2.2, FOR CHARACTERISTIC

EDOLAN ETS,UNDER TEST METHOD COLUMN, ADD

FOOTNOTE "7"/,ADD NEW FOOTNOTE "8"/.

PAGE 6, PARAGRAPH 4.2.2, TABLE II.AFTER FOOTNOTE

"7/",ADD THE FOLLOWING:"8"/ THE SAMPLE SHALL

BE DRY-CLEANED FOR THREE CYCLES IN ACCORDANCE

WITH AATCC TEST METHOD 86 BEFORE DETERMINING

MOTHPROOFING COMPOUND CONTENT.

PAGE 6, PARA.4.2.2, TABLE 11, AFTER FOOTNOTE 6/,

INSERT "7/ HIGH PERFORMANCE LIQUID

CHROMATOGRAPHY (HPLC) TEST METHOD MAY BE

OBTAINED FROM BAYER CORP., ROCK HILL, SC 29732."

PAGE 6, PARAGRAPHS 4.3,4.3.1,4.3.1.1,4.3.1.2,

4.3.1.3,4.3.1.4,4.3.1.5 DELETE PARAGRAPHS IN

THEIR ENTIRETY WITH NO REPLACEMENT.

PAGE 7, PARAGRAPHS 4.3.1.6, 4.3.1.7, 4.3.1.7.1

DELETE PARAGRAPHS IN THEIR ENTIRETY WITH NO

REPLACEMENT.

PAGE 8, PARAGRAPHS 4.3.1.7.2, 4.3.1.8, 4.3.1.8.1

DELETE PARAGRAPHS IN THEIR ENTIRETY WITH NO

REPLACEMENT.

PAGE 9, PARAGRAPHS 6.3 2, 6.4, 6.5, 6.6 DELETE

PARAGRAPHS IN THEIR ENTIRETY WITH NO

REPLACEMENTS.

PAGE 11, DELETE FIGURE 1 IN ITS ENTIRETY WITH NO

REPLACEMENT.

TABLE II, UNDER TEST METHOD: DELETE "2015" AND

SUBSTITUTE "2015.3"

NOTE! MITTEN FF CONC. SUPPLIED BY CIBA-GEIGY

CORP. P.O. BOX 11422, GREENSBORO, NC 27409

EDOLAN ETS, SUPPLIED BY MILES INC.,MOBAY ROAD,

PITTSBURGH,PA.15205-9741.

ARE APPROVED MOTH PROOFING AGENTS FOR

MILITARY FABRICS.

ADDITIONAL INFORMATION FOR FED-STD-311:

INTERIM CHANGES FROM FED-STD-311:

INTERIM CHANGE FROM CH NOT 1, 8/27/71:

SECTION 4, PARA. 4.5.1.2, LINE 8: DELETE THE PERIOD AFTER "BACKBONE" AND

ADD "AND TO INDICATE THE ROOT OF THE TAIL".

INTERIM CHANGE FROM TEST METHOD 7011.1:

PARA. 4.1.2: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING: "4.1.2

INDICATING DEVICE. THE INDICATING DEVICE SHALL BE EITHER OF THE KINDS

LISTED BELOW.

4.1.2.1 THE SHRINKAGE METER DIAL. A DIAL INDICATOR HAVING A FACE DIVIDED

INTO 360-380 DEGREES, WITH ONE REVOLUTION OF THE DIAL HAND

CORRESPONDING TO 0.5 INCHES (12.7 MM) SPECIMEN MOVEMENT, WITH LEEWAY

FOR FOUR REVOLUTIONS.

4.1.2.2 AGD DIAL INDICATOR. A MECHANICAL DEVICE CAPABLE OF REGISTERING

ON A SCALE READING OF THE SHRINKAGE OR SWELLING RATIO OF THE

SPECIMEN IN A RATIO OF 25 UNITS OF DIAL MOVEMENT TO ONE UNIT OF

SPECIMEN MOVEMENT, OR GREATER, AND SHALL ACCURATELY DETECT THE

POINT AT WHICH SHRINKAGE BEGINS BY THE MOVEMENT OF THE DIAL NEEDLE.

THE INDICATOR SHALL HAVE A SPINDLE CAPABLE OF ATTACHMENT TO THE

SPECIMEN AND TO THE ADJUST- ABLE WEIGHT ASSEMBLY (SEE 4.1.11)."

PARA. 4.1.3: DELETE "HEATING COIL" AND INSERT "IMMERSION HEATER".

PARA.7.1: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING:

"7.1 THE THERMOMETERS MAY BE PURCHASED FROM THE THOMAS SCIENTIFIC

CO. OR FISHER SCIENTIFIC CO., EACH HAVING REGIONAL OFFICES.

7.2 DIAL INDICATORS MAY BE PURCHASED FROM B. C. AMES CO., LEXINGTON

STREET, WALTHAM, MA 02254."

(ref. T0211 - 5/23/06)

ADDITIONAL INFORMATION FOR MIL-STD-105:

NOTE: MIL-STD-105 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING:

"AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) ANSI/ASQC Z1.4 -

SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES".

APPLICATION FOR COPIES SHOULD BE OBTAINED FROM:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WI 53203

(Ref. T0301)

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE - DATED 19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE

DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME

IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING

CONTAINERS OF DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT. IF THE

MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING

CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE

LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING

LIST

HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

(Ref. T0303 - May, 2006) ADDITIONAL INFORMATION: MIL-STD-147D IS HEREBY

CANCELLED AND REPLACED BY MIL-HDBK-774, "PALLETIZED UNIT LOADS",

DATED 30 AUGUST 2004 (See T0035 for MIL-HDBK-774A) (Ref. T0306 - 03/28/2007, paa2775)

LABELING/PACKAGING FOR DRESS CLOTHING ITEMS

The following list shows items which require labeling on the packaging in accordance with the attached graphics depicting the DSCP logo and a product line name. Although labeling is required on all of these items, it may not be required on all packaging. For example, while skirts are required to be packaged in a poly bag, those bags do not need to be printed with the DSCP logo and product line name. However, poly bags for shirts and sweaters must be printed with the DSCP logo and product name.

ITEM

POLY BAG

SEWN-IN

LABELS

HANG TAG

BOX

All-Weather Coats No Yes Yes No Jackets No Yes Yes No Overcoats (Peacoats) No Yes Yes No Sweaters Yes Yes No No

Jumpers No Yes Yes No Skirts No Yes Yes No Coveralls No Yes Yes No Shirts Yes Yes No No Garrison Caps Yes Yes YES No Berets Yes Yes No No Trousers, Utility No Yes Joker Tag No Slacks, Utility No Yes Joker Tag No

The following is a chart that shows the branch of service and the correlating product line name to be used.

SERVICE PRODUCT LINE NAME

Army Garrison Collection Navy Quarterdeck Collection Air Force Wings Collection Marine Corps Valor Collection Coast Guard Guardian Collection Common Service (used by 2 or more services)

Defender Collection

PMS color numbers are as follows:

PMS Color Numbers DSCP website PMS # 287U (Blue) Product line name (e.g., Garrison Collection)

PMS # 287U (Blue)

Tag line (“…the perfect fit”) PMS # 187U (Red) DSCP logo PMS # 187U (Red) – 2nd & 4th vertical stripes in shield;

PMS # 287U (Blue) – outline of eagle and wings, background of star in shield, DSCP lettering; and White (no PMS # assigned) - 1st, 3rd & 5th vertical stripes in shield, star in shield, eagle’s head.

Wording (including “Made in USA”) on reverse of hang tag and poly bag

PMS # 287U (Blue)

The following are the specifics regarding sewn-in labels, hang tags, and printed poly bags. It is noted that the DSCP logo and product line names are to be recreated from the graphics shown later in this document, so that the logo and the font, font size, and size of the logo are exactly as shown. Further, it is noted that the DSCP website is to be italicized.

POLY BAGS

Dimension For shirts and sweaters: White background, 3” H completely surrounding the bag. Position white background approx 1/3 of the way up from bottom of bag. For garrison caps: white background, 3”H x approx 6” W (front of bag) and 8”W (reverse of bag), positioned lengthwise on the bag approx 3” (front of bag) and 2” (reverse of bag) from closed end of bag and centered top-to-bottom. For berets: white background, 3”H x 6” W (front of bag) and 8” W (reverse of bag); centered on the front and approx 2” below the open end of the reverse;

positioned with the open end of the bag above the DSCP logo on both the front and reverse sides. Insert the beret so that the combination label is visible through the reverse side of the bag.

Packaging For dress shirts only: commercial packaging (including pins, cardboard backing, plastic collar stands, etc.)

Self-Adhesive Label For sweaters: size and NSN must be printed in black ink on a self-adhesive label approximately 1 ½” W x ¾” H, affixed on the bottom right hand corner of front of poly bag, below the white background with the DSCP logo and product line name. Approx fonts: Size – 14 point; NSN – 10 point. The size shall be indicated by the letters S, M, L, XL, etc, followed by the required numerical size – for example, M (38-40). For garrison caps: replace paper identification label (required to be placed inside the poly bag) with a self-adhesive label of the same approx size and containing the same information. Affix the label on the lower right corner of the front of poly bag, below the white background with the DSCP logo and product line name.

For utility slacks and trousers: self-adhesive commercial leg strip with DSCP logo/website and garment size.

SEWN-IN LABELS

Small Label1 Large Label2

Label Dimension 2 ¾” W x 1 5/8” H or 1 ½ “ W x 2 “ H

3” W x 3” H

Label Color White White Border N/A 4 ½ point, PMS # 287U

(Blue), ¼” from all edges Notes: 1 For all items other than those listed in note 2. Use 2 ¾” W x 1 5/8” H for shirts with double yoke; use 1 ½” W x 2 1/8” H for shirts with without a double yoke.

2 For All-Weather Coats, Overcoats (Peacoats), and Jackets The contract requirement for labels and packaging other than DSCP labeling and packaging remains as specified in the spec or CID except as noted. Stitch the DSCP labels as follows: for skirts, trousers and slacks, and shirts with a double yoke, stitch on both ends; for Coats, Overcoats, Jackets, and Jumpers, stitch on all four sides.

LABEL PLACEMENT

ITEM

Placement

Shirts For shirts with a double yoke: the small size DSCP label shall be centered on the inside of the double yoke below the collar, and must be visible through the poly bag when commercially packaged. The size/NSN label shall be centered and caught in the double yoke seam, beneath the DSCP label. For shirts without a double yoke: the small size DSCP label shall be looped and be centered and caught in the collar seam, on top of, but not attached to, the size/NSN label. The product line name will have to be stacked in order to fit this smaller sized label. The size/NSN label shall be approx 1 ½ “ W x 2 ¾ ” H, printed in the required font size, centered and stitched in collar seam underneath, but not attached to, the DSCP label, so that it extends beyond the bottom of the DSCP label and is completely visible.

All-Weather Coats The large size DSCP label shall be centered and stitched on the left facing, approximately 10”-12” above the bottom edge. If a size/combination label is required in this area, stitch the size/combination label just beneath the DSCP label.

Overcoats (Peacoats)…