SPIF016421574.pdf
PDF 812 KB Posted
- Attached to
- BBU-35A/B Impulse Cartridges Federal contract opportunity
- Solicitation number
- FA821321R2028
About this file
This document provides packaging and palletization procedures for BBU-35A/B Impulse Cartridges. The solicitation seeks bids for BBU-35A/B Impulse Cartridges for the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base. Packaging must include heat-treated wood packaging material that is debarked and certified by an accredited agency under International Standards for Phytosanitary Measures. One sheet of cushioning is to be placed on the bottom of the ammo can, with two trays each containing up to three sealed bags placed inside. An additional desiccant bag and cushioning must fill any voids at the top of the sealed ammo can. Proper documentation of wood packaging treatment is required to comply with international regulations to prevent the spread of invasive species such as pinewood nematode.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SectionMRev15July21.pdf | ||
| FA821321R2028Amend03.pdf | ||
| FA821321R2028Amend02.pdf | ||
| FA821321R2028Amend01.pdf | ||
| SOWSPI.pdf | ||
| Quantity_Bands_BBU35.pdf | ||
| Form158FD2020-20-50147.pdf | ||
| SectionLRev9jun21.pdf | ||
| Repship.pdf | ||
| JQRBBU-35May2019signed.pdf | ||
| ES7034ReworkRepair.pdf | ||
| SectionMRev9Jun21.pdf | ||
| PPI.pdf | ||
| LRFOP_BBU35.pdf | ||
| FOOP.pdf | ||
| CDRLExhibitListBBU35.pdf | ||
| AIRSPECCARTFD2020-20-50147BBU35.pdf | ||
| 137701641574EDLRev8.pdf | ||
| 1653TransportationFD2020-20-50147.pdf | ||
| ES7650_Oct2000-MIL-STD-1916.pdf | ||
| ES7035DescriptionSheet.pdf | ||
| DataPackageBidSet.pdf | ||
| BBU-35CDRLS-FD2020-20-50147Rev060721.pdf | ||
| FA821321R2028.pdf |
Show all 24
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 10 SEPTEMBER 2020. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NOTES
1. PLACE ONE (1) SHEET OF CUSHIONING, REF.-1, ON THE BOTTOM OF AMMO CAN.
2. PLACE TWO (2) EACH TRAYS, REF.-3, INTO BAG, REF.-2, EVACUATE AIR AND SEAL.
3. MAY PLACE UP TO THREE (3) BAGS, REF.-2, INTO M2A1 CAN, NOT TO EXCEED POP TESTED WEIGHT.
4. ADD DESICCANT BAG, REF.-4, IN AMMO CAN IN FRONT OF SEALED BAGS.
5. USE ADDITIONAL CUSHIONING, REF.-1, AS REQUIRED, TO FILL VOIDS IN THE TOP OF AMMO CAN.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTES FOR PALLETIZATION PROCEDURES
1. THE CONTAINERS SHALL BE POSITIONED WITH CLOSURES IN ONE DIRECTION.
File details come from the government source that posted it. Updated .