SPI_PHST_338.pdf

SPECIAL PACKAGING INSTRUCTION (SPI)

(DEVELOPED IN ACCORDANCE WITH MIL-STD-2073-1E)

NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER

NAVAL SURFACE WARFARE CENTER (NSWC)

INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD)

DETACHMENT PICATINNY, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ, 07806-5000 http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/ SystemsIntegration/PHST.aspx

1. SPI NUMBER

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER (NSN)-DODIC-NALC

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A, RDCTL

8. UNIT OF ISSUE

EACH

9. QTY PER UNIT PACK (U/P)

ONE

10. UNIT PACK WEIGHT (LB)

VARIOUS

11. UNIT PACK CUBE (CU FT)

PER MIL-DTL-117 BAG SELECTED

12. UNIT PACK OUTSIDE DIMENSIONS (LWH INCHES)

PER MIL-DTL-117 BAG SELECTED

13. METHOD OF PRESERVATION

PRESERVATION SHALL BE IN ACCORDANCE WITH (IAW) THIS SPI

14. ICQ

N/A

15. SPECIAL MARKING CODE

MARKINGS SHALL BE IAW THIS SPI

16a. LEVEL A PACKING N/A

16b. LEVEL B PACKING N/A

17a. LEVEL A PACKING CLOSURE N/A

17b. LEVEL B PACKING CLOSURE N/A

18. FIBERBOARD BOX WEIGHT (LB)

VARIOUS

19. FIBERBOARD BOX CUBE (CU FT)

SEE BLOCK 23

20. FIBERBOARD BOX OUTSIDE DIMENSIONS (LWH

INCHES)

SEE BLOCK 23

21. QUALIFICATION TEST REPORT - N/A

FIGURE 1

FIGURE 1. - FIBERBOARD BOX

22. SIGNATURES/APPROVALS/REVISIONS

BASIC

OR

REVISION

DESCRIPTION OF CHANGES

(REVISIONS ONLY)

NOSSA HAZARD CLASSIFICATION

CODE N851

NSWC IHEODTD CAD/PAD

SENIOR ENGINEER, CODE E2

DIRECTOR, NAVAL PHST CENTER,

NSWC IHEODTD DET PICATINNY,

CODE G1, A.V. STANTON (ACTING)

BASIC ------------------------------

DISTRIBUTION A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/SystemsIntegration/PHST.aspx http://www.navsea.navy.mil/Home/WarfareCenters/NSWCIndianHeadEODTechnology/WhatWeDo/TechnicalDepartments/SystemsIntegration/PHST.aspx

1. SPI NUMBER

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

BLOCK 23

23. BILL OF MATERIALS

ITEM

NO.

QTY

REQD

MATERIAL DESCRIPTION SIZE MATERIAL SPECIFICATION/PART NUMBER/NSN

1. 1 HEAT-SEALABLE BARRIER BAG MIL-DTL-117, TYPE II (MEDIUM DUTY), CLASS H

(WATERPROOF, ELECTROSTATIC PROTECTIVE/

SHIELDING), STYLE 2 (TRANSPARENT)

2. AR WEATHERPROOF LABELS FOR INK JET OR

LASER PRINTERS

NONMETALLIC, PRESSURE SENSITIVE BACKING

HTTPS://WWW.ONLINELABELS.COM/SITEMAP.ASPX

OR COMMERCIAL EQUIVALENT

3. 1 END CAP 829627-02

4. 1 COVER, WITNESS 876098-01

5. AR FIBERBOARD BOX 70.00 X 8.00 X 7.50

INCHES, 2.43 CU FT.

ASTM D5118/D5118M, STYLE (FULL TELESCOPE BOX),

TYPE (CORRUGATED FIBERBOARD), SINGLE WALL,

WEATHER RESISTANT, GRADE (V3C)

SUGGESTED SOURCE OF SUPPLY: BIISCO AND

SOURCEHUB, LLC.

6. AR FIBERBOARD BOX 30.50 X 5.50 X 6.75

INCHES, 0.655 CU FT.

ASTM D5118/D5118M, STYLE (REGULAR SLOTTED BOX),

TYPE (CORRUGATED FIBERBOARD), SINGLE WALL,

WEATHER RESISTANT, GRADE (V3C)

SUGGESTED SOURCE OF SUPPLY: M-PAK INC.

7. AR PRESSURE-SENSITIVE TAPE FOR

PACKAGING, BOX CLOSURE, AND

SEALING

3 INCH WIDE ASTM D5486/D5486M, TYPE V (WEATHER-RESISTANT

PAPER BACKED)

8. AR CUSHIONING MATERIAL, PACKAGING

(NON-COMPRESSED, CELLULOSE

WADDING)

NSN 8135-00-183-8814

9. AR INK, STENCIL A-A-00208 TYPE I

10. 1 HAZMAT LABEL: EXPLOSIVE 1.4S 4” X 4” HTTPS://WWW.ULINE.COM/PRODUCT/DETAIL/S-2521/

D.O.T.-LABELS-AND-PLACARDS/DOT-LABELS-

EXPLOSIVE-1-4S-4-X-4

ULINE P/N S-2521 OR EQUIVALENT

11. 1 PRESSURE-SENSITIVE ADHESIVE LABELS

FOR BAR CODING

(2DBC - TWO DIMENSIONAL BAR CODE)

MIL-PRF-61002B: GRADE A, STYLE 2, COMPOSITION (b)

OR EQUIVALENT

12. 1 MATERIAL CONDITION TAG OR LABEL:

• SERVICEABLE

• SUSPENDED

• TEST/MODIFICATION

• UNSERVICEABLE (REPAIRABLE)

• UNSERVICEABLE (CONDEMNED)

MIL-STD-129:

• DD FORM 1574 (TAG), DD FORM 1574-1 (LABEL)

• DD FORM 1575 (TAG), DD FORM 1575-1 (LABEL)

• DD FORM 1576 (TAG), DD FORM 1576-1 (LABEL)

• DD FORM 1577-2 (TAG), DD FORM 1577-3 (LABEL)

• DD FORM 1577 (TAG), DD FORM 1577-1 (LABEL)

13. AR COMPOUND, OBLITERATING, AEROSOL NSN 8010-00-582-4743

https://www.uline.com/Product/Detail/S-2521/D.O.T.-Labels-and-Placards/DOT-Labels-Explosive-1-4S-4-x-4

HTTPS://WWW.ONLINELABELS.COM/SITEMAP.ASPX

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

24. REMARKS

A. SAFETY PRECAUTIONS: EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IN ACCORDANCE WITH THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1 FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED DEVICES (CADS) AND PROPELLANT ACTUATED DEVICES (PADS).

B. THE BAR CODE SYMBOLOGY AND HUMAN READABLE INFORMATION (HRI) THAT ARE TO BE APPLIED SHALL BE IAW MIL-STD-129.

C. ICQ - INTERMEDIATE CONTAINER QUANTITY.

D. NAVSUP P-805 - AMMUNITION SENTENCING PUBLICATION.

E. NAVSEA SW020-AC-SAF-010 - TRANSPORTATION AND STORAGE DATA FOR AMMUNITION, EXPLOSIVES, AND RELATED HAZARDOUS

MATERIALS.

F. 49 CFR - SUBPART E - LABELING 172.406: PLACEMENT OF LABELS.

G. MIL-STD-2073-1 - DEPARTMENT OF DEFENSE STANDARD PRACTICE FOR MILITARY PACKAGING.

H. UNIT PACK: THE FIRST TIE, WRAP, OR CONTAINER APPLIED TO A SINGLE ITEM, OR A QUANTITY THEREOF, OR TO A GROUP OF ITEMS OF A SINGLE STOCK NUMBER, PRESERVED OR UNPRESERVED, WHICH CONSTITUTES A COMPLETE OR IDENTIFIABLE PACKAGE. A UNIT PACK IS ALSO OFTEN REFERRED TO AS A ‘PACKAGE’ OR MERELY AS A “PACK”. HTTP://WWW.DLA.MIL/LANDANDMARITIME/

OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS/PACKAGING/DEFINITIONS.ASPX.

I. PERFORMANCE ORIENTED PACKAGING (POP) CERTIFICATION REQUIREMENT: THE CONTRACTOR SHALL PERFORM TESTING AND SHALL ACQUIRE DATA NECESSARY TO SUPPORT COMPLIANCE WITH POP REQUIREMENTS OF HAZARDOUS MATERIALS AS DEFINED IN TITLE 49, CODE OF FEDERAL REGULATIONS (CFR), THE INTERNATIONAL MARITIME ORGANIZATION’S INTERNATIONAL MARITIME DANGEROUS GOODS (IMDG) CODE, AND THE INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS FOR THE SAFE TRANSPORT OF DANGEROUS GOODS. TESTING SHALL BE PERFORMED IN ACCORDANCE WITH AMERICAN SOCIETY

FOR TESTING AND MATERIALS (ASTM) D4919, TESTING OF HAZARDOUS MATERIAL PACKAGING.

J. AS THE HANDLING SAFETY OF CARTRIDGES WHEN HANDLED OUTSIDE OF AN APPROVED AREA HAS NOT BEEN ESTABLISHED, THE PACKING OF CARTRIDGES SHOULD ONLY BE DONE IN AN APPROVED AREA WHERE THE ELECTRO-MAGNETIC EFFECTS (EME) LEVELS DO NOT EXCEED THE MAXIMUM ALLOWABLE ENVIRONMENTS ESTABLISHED FOR EXPOSURE OF HERO UNSAFE ORDNANCE.

TABLE 1: EQUIPMENT LIST

NO. NOMENCLATURE NSN/PART NUMBER QUANTITY

1. HEAT SEALING EQUIPMENT LOCAL SUPPLY 1

2. VACUUM EQUIPMENT LOCAL SUPPLY 1

http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx http://www.dla.mil/landandmaritime/offers/services/technicalsupport/logistics/packaging/definitions.aspx

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

ORDER OF PRECEDENCE. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS DOCUMENT AND OTHER PUBLISHED REFERENCES, THE TEXT OF THIS DOCUMENT TAKES PRECEDENCE. NOTHING IN THIS DOCUMENT, HOWEVER, SUPERSEDES APPLICABLE LAWS AND REGULATIONS UNLESS A SPECIFIC EXEMPTION HAS BEEN OBTAINED.

SAFETY PRECAUTIONS. EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IN ACCORDANCE WITH THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1, FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED DEVICES (CADS), AND PROPELLANT ACTUATED DEVICES (PADS).

NOTE

CORD ASSEMBLY, DETONATING, RAU-4/A, RAPID DEFLAGRATING CORD

TRANSFER LINE (RDCTL) HEREINAFTER WILL BE REFERRED TO AS DET

CORD.

1. OBTAIN BARRIER BAG MATERIAL, ITEM 1, AND TRANSFER TO PACKING AREA. IF REQUIRED, FABRICATE THE HEAT SEALABLE BARRIER BAG TO DIMENSIONS LISTED IN, TABLE 2, FOR EACH DODIC TO BE PACKED.

TABLE 2

2. OBTAIN LABEL, ITEM 2, AND PRINT THE FOLLOWING INFORMATION ON LABEL, IN ACCORDANCE WITH MIL-STD-129

REQUIREMENTS. CLEARLY STATE THE FOLLOWING INFORMATION:

NOTE

WORDS SUCH AS “NSN”, “ITEM DESCRIPTION”, AND “QUANTITY” SHALL

NOT BE INCLUDED AS PART OF THE IDENTIFICATION MARKINGS.

MARKING LOCATIONS ON CONTAINER SHALL BE IAW MIL-STD-129.

NOTE

LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF EQUAL

HEIGHT, CLEARLY VISIBLE, AND LARGEST SIZE PRACTICAL FOR

PACKAGE SIZE WITHIN ACCEPTABLE RANGE. WHEN MARKING SPACE

PERMITS, STENCILED OR PRE-PRINTED MARKINGS SHALL NOT BE LESS

THAN 3/32 OF AN INCH.

TABLE 2: PACKAGING DIMENSIONS

DODIC BARRIER BAG SIZE

IN INCHES

FIBERBOARD

BOX SIZE IN

INCHES

JN56 69” X 6” 70” X 8” X 7.5”

JN57 69” X 6” 70” X 8” X 7.5”

JN58 69” X 6” 70” X 8” X 7.5”

JN59 32” X 6” 30.5” X 5.5” X 6.75”

JN60 32” X 6” 30.5” X 5.5” X 6.75”

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

ITEM DESCRIPTION MAY BE MARKED ON MORE THAN ONE LINE IF

REQUIRED DUE TO SPACE LIMITATIONS.

A. NATIONAL STOCK NUMBER (NSN) AND DOD IDENTIFICATION CODE (DODIC) SHALL BE PLACED ON THE SAME

LINE (SEE TABLE 3).

B. QUANTITY/UNIT OF ISSUE. THE QUANTITY ALWAYS PRECEDES THE ITEM DESCRIPTION (NOMENCLATURE) ON

THE SAME LINE: 1 CORD ASSEMBLY, DETONATING, RAU-4/A, RDCTL.

C. SER NUMBER - (INSERT SERIAL NO.): “SER” SHALL PRECEDE SERIAL NUMBER.

D. LOT NUMBER - (INSERT LOT NO.): THE WORD “LOT” SHALL PRECEDE LOT NUMBER.

3. INSTALL LABEL, ITEM 2, ON BARRIER BAG.

4. INSPECT DET CORD TO BE PACKED FOR DEFECTS WHICH MAY AFFECT ITS FUNCTION. NOTIFY SUPERVISOR IF DET

CORD IS SUSPECT.

SEE TABLE 3

TABLE 3: IDENTIFICATION DATA

DODIC NOMENCLATURE DOD & DOT

HAZARD CLASS

PROPER SHIPPING NAME UN ID

NO.

NET EXPLOSIVE

WEIGHT LB. (KG.)

NSN PN

JN56 CORD ASSEMBLY,

DETONATING, RAU-4/A, RDCTL

1.4S FUZES, DETONATING 0367 0.001680 (0.000762) 1377-01-660-2677 3315AS463-4

JN57 CORD ASSEMBLY,

DETONATING, RAU-4/A, RDCTL

1.4S FUZES, DETONATING 0367 0.001587 (0.000720) 1377-01-660-2675 3315AS463-3

JN58 CORD ASSEMBLY,

DETONATING, RAU-4/A, RDCTL

1.4S FUZES, DETONATING 0367 0.001819 (0.000825) 1377-01-660-2673 3315AS463-2

JN59 CORD ASSEMBLY,

DETONATING, RAU-4/A, RDCTL

1.4S FUZES, DETONATING 0367 0.000967 (0.000439) 1377-01-660-2674 3315AS463-1

JN60 CORD ASSEMBLY,

DETONATING, RAU-4/A, RDCTL

1.4S FUZES, DETONATING 0367 0.000511 (0.000232) 1377-01-660-4904 3315AS463-5

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

FIGURE 2

FIGURE 2. PROTECTIVE CAPS ON DET CORD

5. INSTALL PROTECTIVE CAPS, ITEM 3 AND ITEM 4, ON DET CORD, AS SHOWN IN FIGURE 2.

6. INSERT DET CORD IN APPROPRIATE SIZE BARRIER BAG FROM TABLE 2.

7. REMOVE/EVACUATE AIR FROM BARRIER BAG.

WARNING

ENSURE LOCAL SAFETY PROCEDURES ARE FOLLOWED WHEN

OPERATING BARRIER BAG HEAT SEAL EQUIPMENT.

8. HEAT SEAL BARRIER BAG UNTIL FULLY SEALED, AS SHOWN IN FIGURE 3.

FIGURE 3

FIGURE 3. BARRIER BAG SEALED

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

DODIC’S JN56, JN57, AND JN58 ARE PACKED IN FIBERBOARD BOX ITEM 5.

DODIC’S JN59 AND JN60 ARE PACKED IN FIBERBOARD BOX ITEM 6.

9. ASSEMBLE, AS APPLICABLE, SHIPPING BOX, ITEM 5 OR ITEM 6, WITH TAPE, ITEM 7, COVERING ALL SEAMS AND CORNERS ON THE BOTTOM. LINE INSIDE WALLS AND BOTTOM OF BOX WITH CUSHIONING MATERIAL, ITEM 8, AS

SHOWN IN FIGURE 4.

10. CAREFULLY PLACE BARRIER BAGGED DET CORD INTO THE APPROPRIATE FIBERBOARD BOX.

FIGURE 4

FIGURE 4. CUSHIONING MATERIAL, FIBERBOARD BOX

11. EXCESSIVE SPACE IN FIBERBOARD BOX IS TO BE FILLED WITH CUSHIONING MATERIAL, ITEM 8, FOR A TIGHT

PACK, AS SHOWN IN FIGURE 4.

12. CLOSE AND SECURE FIBERBOARD BOX WITH TAPE, ITEM 7, COVERING ALL SEAMS AND CORNERS.

WARNING

READ THE SAFETY DATA SHEET (SDS) FOR INK, STENCIL/A-A-00208 TYPE

I. THE PRECAUTIONS, PROCEDURES AND SPECIAL PROTECTION

INFORMATION CONCERNING THE INK SHALL BE FOLLOWED.

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

13. FOLLOWING INFORMATION SHALL BE APPLIED BY STENCILING OR ON PRE-PRINTED LABELS, ITEM 2. LABELS SHOULD BE BLACK LETTERS ON A WHITE BACKGROUND. IDENTIFICATION MARKINGS MUST BE PLACED ON EXTERIOR OF FIBERBOARD BOX IN ACCORDANCE WITH MIL-STD-129 REQUIREMENTS, SEE FIGURE 6.

NOTE

WORDS SUCH AS “NSN”, “ITEM DESCRIPTION”, AND “QUANTITY” SHALL

NOT BE INCLUDED AS PART OF THE IDENTIFICATION MARKINGS.

MARKING LOCATIONS ON CONTAINER SHALL BE IAW MIL-STD-129. ITEM

DESCRIPTION MAY BE MARKED ON MORE THAN ONE LINE IF REQUIRED

DUE TO SPACE LIMITATIONS.

NOTE

LETTERING/MARKINGS SHALL BE IN CAPITAL LETTERS OF EQUAL

HEIGHT, CLEARLY VISIBLE, AND LARGEST SIZE PRACTICAL FOR

PACKAGE SIZE WITHIN ACCEPTABLE RANGE. WHEN MARKING SPACE

PERMITS, STENCILED OR PRE-PRINTED MARKINGS SHALL NOT BE LESS

THAN 3/32 OF AN INCH.

A. NATIONAL STOCK NUMBER (NSN) AND DOD IDENTIFICATION CODE (DODIC) SHALL BE PLACED ON THE SAME

LINE (SEE TABLE 3).

B. QUANTITY/UNIT OF ISSUE. THE QUANTITY ALWAYS PRECEDES THE ITEM DESCRIPTION (NOMENCLATURE) ON

THE SAME LINE: 1 CORD ASSEMBLY, DETONATING, RAU-4/A, RDCTL

C. PART NUMBER (SEE TABLE 3). THE PART NUMBER SHALL BE PRECEDED BY THE ABBREVIATION “PN” OR “P/N”.

D. WEIGHT AND CUBE. THE CAPITAL LETTERS “WT” SHALL PRECEDE THE NUMERICAL GROSS WEIGHT IN POUNDS FOLLOWED WITH THE ABBREVIATION FOR POUNDS “LBS”. FRACTIONAL WEIGHTS SHALL BE ROUNDED UP TO THE NEXT WHOLE POUND. THE CAPITAL LETTERS “CU” SHALL PRECEDE THE NUMERICAL CUBE IN FEET, ROUNDED TO NEXT WHOLE DIGIT.

E. LOT NUMBER (SIDE OF CONTAINER). THE LOWER MOST MARKING ON THE PACKAGE SIDE CONTAINING THE ITEM NOMENCLATURE SHALL BE THE AMMUNITION LOT NUMBER. THE LOT NUMBER SHALL BE PRECEDED BY THE WORD “LOT” AND SHALL BE UNDERLINED WITH A SOLID LINE APPROXIMATELY 1/8 INCH THICK. IF A SERIAL NUMBER IS REQUIRED FOR THE ITEM(S) THE WORD “SER” AND THE SPECIFIC NUMBER(S) SHALL BE MARKED

ABOVE THE LOT NUMBER.

F. DODIC AND LOT NUMBER - BOTH ENDS OF FIBERBOARD BOX SHALL BE MARKED WITH DODIC AND APPROPRIATE LOT NUMBER. THE LOT NUMBER ON FIBERBOARD BOX ENDS SHALL NOT BE PRECEDED BY THE

WORD “LOT” OR UNDERLINED.

G. FOR AIR SHIPMENTS, NET EXPLOSIVE WEIGHT (N.E.W.) - (INSERT N.E.W. IN KG) (SEE TABLE 3).

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

NOTE

THE FOLLOWING MARKINGS MUST BE UNOBSCURED BY LABELS OR

ATTACHMENTS; AND MUST BE LOCATED AWAY FROM ANY OTHER

MARKING THAT COULD SUBSTANTIALLY REDUCE ITS EFFECTIVENESS.

H. DOT LABEL FOR EXPLOSIVES 1.4S, ITEM 10.

I. UNITED NATIONS (UN) PROPER SHIPPING NAME (PSN) AND UN IDENTIFICATION NUMBER: FUZES, DETONATING, UN0367.

NOTE

AT TIME OF ISSUE, THE UN POP TEST MARKING NOTED IN THE

FOLLOWING STEP, WAS THE MARKING OF RECORD FOR THE PACKAGING

ARRANGEMENT SPECIFIED IN THIS SPI. HOWEVER, ADDITIONAL

MANUFACTURERS MAY HAVE PACKAGED AND ISSUED ITEMS COVERED

BY THIS SPI BUT HAVE A UN POP MARKING DIFFERENT FROM WHAT IS

NOTED IN THIS SPI. AS LONG AS ITEMS LISTED ARE PACKAGED AS

NOTED IN THIS SPI, THE ALTERNATIVE UN POP MARKING STENCILED ON

THE SHIPPING BOX IS VALID FOR USE.

J. VERIFY UN PERFORMANCE-ORIENTED PACKAGING (POP) CERTIFICATION MARKING:

NOTE

** INDICATES THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE

PACKAGING WAS MANUFACTURED, OR THE YEAR THE ITEM WAS

PACKED.

K. MARK SPI NUMBER (SPI-PHST-338) ON CONTAINER (AIR FORCE USE ONLY).

FIBERBOARD BOX

70.00 X 8.00 X 7.50

INCHES, 2.43 CU FT

FIBERBOARD BOX

30.50 X 5.50 X 6.75

INCHES, 0.655 CU FT

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

14. IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR PURCHASE ORDER, THE FIBERBOARD BOX SHALL BE TAGGED USING A TWO-DIMENSIONAL BAR CODE LABEL (2DBC), ITEM 11, IAW MIL-STD-129.

ACTIVITIES THAT DO NOT YET HAVE A 2DBC CAPABILITY BUT HAVE A LINEAR BAR CODE CAPABILITY SHALL CONTINUE TO USE LINEAR BAR CODE IN COMBINATION WITH MATERIAL CONDITION TAGS, ITEM 12.

ACTIVITIES THAT HAVE NO BAR CODE CAPABILITY SHALL CONTINUE TO USE MATERIAL CONDITION TAGS.

NOTE

TRACEABLE SEALS, TYPE II MAY BE PRE-PRINTED, STAMPED OR

MARKED WITH THE ACTIVITY SYMBOL OR IDENTIFIER. FOR

GOVERNMENT ACTIVITIES, PREPRINTING OF INDIVIDUAL INSPECTOR

INDICATORS ARE NOT AUTHORIZED.

FIGURE 5

FIGURE 5. EXAMPLE OF TYPE 2 TRACEABLE SEAL

NOTE

NAVY AND MARINE CORPS ACTIVITIES: TYPE 2 TRACEABLE SEALS

APPLIED BY NAVY AND MARINE CORPS ACTIVITIES SHALL INCLUDE

THE ACTIVITY’S UNIT IDENTIFICATION CODE (UIC) AS WELL AS

APPLICATION OF AN INDIVIDUAL INSPECTION INDICATOR STAMP. THE

INSPECTOR INDICATOR STAMP SHALL BE A NUMERIC OR ALPHA-

NUMERIC IDENTIFIER TRACEABLE TO THE INDIVIDUAL ASSIGNED THE

INSPECTION INDICATOR STAMP. AN ACCEPTABLE ALTERNATE METHOD

OF CERTIFYING THE TRACEABLE SEAL IS TO APPLY, WITH A

PERMANENT MARKER, THE INSPECTORS PRINTED NAME, SIGNATURE,

AND ACTIVITY UIC, IF THE UIC IS NOT PREPRINTED.

NOTE

SIZE THE TRACEABLE SEALS SO THAT THE MARKINGS AND LABELS ARE

NOT OBSCURED.

15. USING ITEM 2, FABRICATE TYPE 2 TRACEABLE SEALS, SEE FIGURE 5. THE SEALS SHALL BE APPLIED TO THE FIBERBOARD BOX SO THAT THEY MUST BE REMOVED, CUT OR DEFACED IN ORDER TO OPEN THE FIBERBOARD

BOX TO REMOVE THE DET CORD.

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

PACKING INSTRUCTIONS

YOUR COMMENTS AND QUESTIONS REGARDING THIS DOCUMENT ARE ENCOURAGED. PLEASE RESPOND TO: NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER, NAVAL SURFACE WARFARE CENTER (NSWC) INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD), DETACHMENT PICATINNY, CODE G11, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ 07806-5000, E-MAIL ADDRESS: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil

FIGURE 6

FIGURE 6. FIBERBOARD BOX MARKINGS/LABELS

mailto: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil?Subject=SPI-PHST-338 mailto: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil?Subject=SPI-PHST-338

SPI-PHST-338

2. DATE 3. CURRENT REVISION

BASIC

4. NATIONAL STOCK NUMBER

SEE TABLE 3

5. CAGE NO. - PART/DRAWING NUMBER

SEE TABLE 3

6. CAGE

040L3

7. NOMENCLATURE

CORD ASSEMBLY, DETONATING, RAU-4/A,

RDCTL

8. UNIT OF ISSUE

EACH

UNPACKING INSTRUCTIONS

YOUR COMMENTS AND QUESTIONS REGARDING THIS DOCUMENT ARE ENCOURAGED. PLEASE RESPOND TO: NAVAL PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION (PHST) CENTER, NAVAL SURFACE WARFARE CENTER (NSWC) INDIAN HEAD EXPLOSIVE ORDNANCE DISPOSAL TECHNOLOGY DIVISION (IHEODTD), DETACHMENT PICATINNY, CODE G11, BUILDING 458, WHITTEMORE AVE., PICATINNY ARSENAL, NJ 07806-5000, E-MAIL ADDRESS: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil

ORDER OF PRECEDENCE. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS DOCUMENT AND OTHER PUBLISHED REFERENCES, THE TEXT OF THIS DOCUMENT TAKES PRECEDENCE. NOTHING IN THIS DOCUMENT, HOWEVER, SUPERSEDES APPLICABLE LAWS AND REGULATIONS UNLESS A SPECIFIC EXEMPTION HAS BEEN OBTAINED.

SAFETY PRECAUTIONS. EXPLOSIVE DEVICES SHALL BE HANDLED, STORED, AND SHIPPED IN ACCORDANCE WITH THE GENERAL SAFETY PRECAUTIONS GIVEN IN THE SAFETY SUMMARY OF NAVAIR 11-100-1.1, FLEET SUPPORT FOR IN-SERVICE CARTRIDGES, CARTRIDGE ACTUATED DEVICES (CADS) AND PROPELLANT ACTUATED DEVICES (PADS).

1. CAREFULLY TRANSPORT PACKED FIBERBOARD BOX, ITEM 5 OR ITEM 6, TO UNPACKING AREA.

2. INSPECT FIBERBOARD BOX FOR DAMAGE WHICH INDICATES CONTENTS MIGHT BE DAMAGED. REPORT ANY SUCH

DAMAGE TO SUPERVISOR.

3. INSPECT TRACEABLE (ANTI-PILFERAGE) SEALS FOR EVIDENCE OF TAMPERING. IF SEALS ARE CUT, MISSING, OR

DAMAGED, NOTIFY SUPERVISOR.

NOTE

EXERCISE CARE WHEN OPENING THE FIBERBOARD CONTAINER. THE

CONTAINER CAN BE REUSED PROVIDED IT REMAINS SERVICEABLE.

4. CAREFULLY SLIT TRACEABLE (ANTI-PILFERAGE) SEALS AND PACKING TAPE SO FIBERBOARD BOX MAY BE OPENED.

5. OPEN FIBERBOARD BOX AND REMOVE TOP LAYER OF CUSHIONING MATERIAL.

6. CAREFULLY REMOVE PACKED DET CORD FROM FIBERBOARD BOX.

7. EXERCISE CARE REMOVE DET CORD FROM BARRIER BAG.

8. CAREFULLY MOVE DET CORD TO DESIGNATED PROCESSING AREA.

WARNING

READ THE SAFETY DATA SHEET (SDS) FOR COMPOUND, OBLITERATING,

AEROSOL. THE PRECAUTIONS, PROCEDURES AND SPECIAL PROTECTION

INFORMATION CONCERNING THE COMPOUND SHALL BE FOLLOWED.

NOTE

EXERCISE CARE NOT TO OBLITERATE CONTAINER UN PERFORMANCE-

ORIENTED PACKAGING (POP) MARKING.

9. DO NOT OBLITERATE CONTAINER UN PERFORMANCE-ORIENTED PACKAGING (POP) MARKING. USING COMPOUND, OBLITERATING, AEROSOL, ITEM 13, REMOVE EXPLOSIVE MARKINGS AND ALL PRE-EXISTING CONTENT MARKINGS

THAT INDICATE DET CORD IS PACKED.

10. IF SERVICEABLE, STENCIL “REUSABLE BOX, DO NOT DESTROY” AND RETAIN FIBERBOARD BOX FOR FUTURE

USE.

11. DISPOSE OF UNSERVICEABLE FIBERBOARD BOXES AND CUSHIONING MATERIAL IN ACCORDANCE WITH LOCAL

DISPOSAL INSTRUCTIONS.

mailto: NSWC_IHEODTD_G1_PHST_ISEA.fct@navy.mil?Subject=SPI-PHST-338