SPI_F016729909.pdf
PDF 960 KB Posted
- Attached to
- C17 FEC Part
- Solicitation number
- FA8213-26-R-3054
About this file
This is a Special Packaging Instruction (SPI) document for military cartridges used as aircraft fire extinguishers, issued under SPI No. F01-672-9909 by 406 SCMS at Hill Air Force Base.
The document establishes detailed packaging and preservation requirements for aircraft fire extinguisher cartridges (National Stock No. 1377-01-672-9909) in compliance with MIL-STD-2073-1. Two packing levels are specified: Level A (ASTM D6251 standard) and Level B (ASTM D5118 standard), with Level A providing the most severe worldwide shipment protection for war reserve materials, mobilization, and strategic deployments. Packaging components include barrier bags (MIL-DTL-117), set-up boxes (PPP-B-566), cushioning materials (A-A-1898 Grade II), and A/R tape (ASTM D5486). The instruction permits up to 20 items per shipping container and requires proper wrapping, air removal, and sealed containment to prevent movement. All wooden packaging materials must comply with ISPM No. 15 requirements, utilizing debarked, heat-treated wood certified by an accredited American Lumber Standards Committee agency to address invasive species concerns. Marking requirements follow MIL-STD-129 standards with specific UN POP markings (4G/Y10/S) for proper shipment identification. The document includes hazard classification requirements and cross-references to SPIRES for complete NSN listings assigned to this SPI.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA821326R3054.pdf | ||
| AirSpec.pdf | ||
| JFQR_MD61.docx | DOCX document | |
| Statement_of_Objectives_SOO.pdf | ||
| SPI_F012552382.pdf | ||
| SOW_Packaging.pdf | ||
| ID_1377016729909.pdf | ||
| FA821326R3054.pdf | ||
| CDRLS.pdf | ||
| SectionMCADPAD_26May2026.pdf | ||
| ADC_SOW.pdf | ||
| ItemMarkingInstruction.pdf | ||
| SectionLCADPAD_26May2026.pdf | ||
| ID_1377013915415.pdf | ||
| REPSHIP.pdf | ||
| ES7034.pdf |
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
MUNITION NOTICES
NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.
NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
NOTICE 3 : SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 4: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTES
1. WRAP ITEM IN REF.-4 PLACE IN BARRIER BAG, REF.-3, REMOVE EXCESS AIR AND SEAL. PLACE IN SET UP BOX REF.-2, ADD REF.-1 IF NEEDED TO PROVIDE A SNUG FIT . PLACE IN CONTAINER USING REF.-1 TO PREVENT MOVEMENT.
2. MAY PLACE UP TO 20 EACH ITEMS IN SHIPPING CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .