SPI - EH6C0292EH.pdf
PDF 146 KB Posted
- Attached to
- Cylinder Outrigger & Cylinder Assembly
- Solicitation number
- SPRDL1-26-R-0057
About this file
This is a DD Form 2169 (Special Packaging Instruction), a federal contracting document that provides detailed packaging and preservation requirements for a specific part.
The form specifies packaging instructions for part number 6-372-002205 (12361), identified as a Cylinder 19207, with National Stock Number 2590-01-1943216. The document, dated 02/25/09 with Revision B, outlines comprehensive preservation and packing procedures compliant with MIL-STD-2073-1D, Method 20. Key preservation requirements include inspecting the item with rods fully retracted, filling with manufacturer-recommended lubricant preservative (MIL-PRF-16173, Grade 4), sealing all openings with appropriately-sized caps/plugs (NAS847), and applying preservative to bare metallic surfaces. The unit pack specifications are 0125.0 pounds weight, 0003.820 cubic feet volume, and dimensions of 087.5 x 009.2 x 008.2 inches. The shipping container must be constructed using 1-inch nominal lumber with 2-inch nominal ends without end cleats, per ASTM-D6880, Standard 1, Class 2, with dimensions of 84-1/2 x 6-5/8 x 4-3/4 inches. Blocking and bracing must conform to ASTM-D6199 specifications with five identified lumber piece configurations, and all blocking and bracing must be secured using nails or staples per FF-N-105. Marking requirements reference MIL-STD-129, with Level A and Level B marking applicable.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRDL126R0057.pdf | ||
| SPI - EH6C0398EH.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
2590-01-1943216 02/25/09
AK11943216
B
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION 5. DATE
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION
6-372-002205 (12361) CYLINDER 19207
A. QUALITY ASSURANCE PROVISIONS, PRESERVATION: INSPECT THE PRESERVATION AND UNIT PACK IN
ACCORDANCE WITH MIL-STD-2073-1.
B. WITH RODS FULLY RETRACTED, FILL WITH PRESERVATIVE USING MANUFACTURER'S RECOMMENDED LUBRICANT.
THOUROUGHLY DRAIN EXCESS.
C. CAPS/PLUGS: SEAL ALL OPENINGS WITH CAPS/PLUGS OF THE APPROPRIATE SIZE.
D. PRESERVATIVE: APPLY TO BARE, UNPLATED, UNPAINTED METALLIC SURFACES.
E. WRAP: SINGLE WRAP REQUIRED. COMPUTE SIZE IN ACCORDANCE WITH MIL-STD-2073-1. SECURE WRAP WITH
TAPE.
F. CONTAINER: CONSTRUCT USING 1" NOMINAL LUMBER WITH 2" NOMINAL ENDS AND NO END CLEATS REQUIRED.
G. PACKING: THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
1 EACH NONE 0125.0 0003.820
MIL-STD-2073-1D, METHOD 20
MIL-STD-2073-1D
MIL-STD-2073-1D
10. UNIT PACK CU. (CU. FT.) 11. UNIT PACK SIZE (IN)
12. MILITARY PRESERVATION
17. NOTES / DRAWING
15. PACKING
14. DRYING
13. CLEANING
7. QUP 8. ICQ 9. UNIT PACK WT. (LB)
20.
DESCRIPTION
18.
STEPS
19.
REQ'D
MIL-STD-2073-1D AND NOTE G
NOT APPLICABLE
MIL-STD-129
087.5 009.2 008.2X X
b. LEVEL B
16. MARKING
a. LEVEL A
1B 2C 3D 4E
6F
PRESERVATIVE: SEE NOTES
CAPS/PLUGS: NAS847
PRESERVATIVE: MIL-PRF-16173, GR 4
WRAP: MIL-PRF-121, TY I, SIZE A/R.
BLOCKING AND BRACING: ASTM-D6199, SEE PG 2
CONTAINER: ASTM-D6880, ST 1, CL 2,
SIZE: 84-1/2 X 6-5/8 X 4-3/4
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
2590-01-1943216 02/25/09
AK11943216
B
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION 5. DATE
-SW
WEATHERIS
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
6-372-002205 (12361) CYLINDER 19207
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
File details come from the government source that posted it. Updated .