SPI.pdf

PDF 363 KB Posted

Attached to
F-16 Data Display Group Federal contract opportunity
Solicitation number
SPRHA4-26-Q-0432
Issued by
Defense Logistics Agency Aviation

About this file

This is a Special Packaging Instruction (SPI) document, Code ID 98747, issued by the Department of Defense for the packaging and shipment of a Data Display Group item (Part/Drawing Number 10-01125-08, National Stock Number 5995-01-143-5443). The document specifies military preservation and packaging requirements in accordance with MIL-STD-2073, including serviceable and unserviceable methods using GX preservation. The item requires cleaning and drying per MIL-STD-2073 with N/A preservative, and marking per IAW MIL-STD-129.

The packaging specifications include two protection levels: Level A and Level B, with detailed dimensions and material requirements for both internal container dimensions (CNTR I.D.) and outer container dimensions (CNTR O.D.). Level A packaging requires ASTM D6880 (MDD) closure, while Level B uses ASTM D1974 closure. The item dimensions are 28 inches by 4 inches by 2 inches, weighing 3 pounds. Packaging materials include specific tape (ASTM D5486), cushioning (A-A-59135), barrier bags (MIL-DTL-117), and top/bottom components (A-A-55057). The document also contains mandatory compliance with international phytosanitary standards (ISPM No. 15) for wood packaging material used in international shipments, requiring debarked wood and heat-treated material certified by the American Lumber Standards Committee. Distribution is restricted to the Department of Defense and U.S. DOD contractors only.

View the file

Other files for this federal contract opportunity

Other files attached to F-16 Data Display Group, newest first.
File Type Posted
SPRHA426Q0432.pdf PDF
SOW.pdf PDF
EDL.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 09 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406

SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

CAUTION NOTICES

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

NOTES

1. WRAP ITEM IN REF.-5 TO PROTECT BAG, REF.-4 FROM BEING PUNCTURED AND TO ENSURE A SNUG FIT.

File details come from the government source that posted it. Updated .