SPI.pdf
PDF 1 MB Posted
- Attached to
- ICBM Separation Clamp Federal contract opportunity
- Solicitation number
- SPRHA222R0183
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains packing instructions and certification requirements for wood packaging materials used in international shipments as well as details of a federal contract opportunity for an Intercontinental Ballistic Missile separation clamp.
The packing instructions specify how individual parts in a kit will be wrapped and packaged, where caution notices should be applied, and how other items will be individually identified, wrapped and bagged. International standards are referenced regarding heat treatment and debarking of wood packaging materials to prevent the spread of invasive species. The contract opportunity is a 100% small business set-aside issued by the Defense Logistics Agency Aviation for the technical data package related to an ICBM separation clamp. Responses are due as indicated in the solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA222R0183_______0003.pdf | ||
| SPRHA222R0183_______0002.pdf | ||
| SPRHA222R0183_______0001.pdf | ||
| SPRHA222R0183.pdf | ||
| EDR.pdf | ||
| FATR.pdf | ||
| CPP.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CUI
1073180607C
CTI FEDCON
CAUTION NOTICES
NOTES
1. INDIVIDUAL PARTS IN THIS KIT WILL BE WRAPPED, REF.-6 AND PACKED AS SHOWN IN TABLE I.
2. APPLY CAUTION NOTICES TO THE OUTSIDE BAG OF THOSE ITEMS THAT REQUIRE THEM, SEE TABLE I.
3. PARTS LISTED IN TABLE II WILL BE INDIVIDUALLY IDENTIFIED AND WRAPPED IN REF.-6, THEN BAGGED IN ONE (1) BAG, REF.-13.
4. PART NUMBER 66C49114G1 ITEMS TO BE WRAPPED IN REF.-6, AND PLACED INTO INNER CONTAINERS, REF.-7.
5. PLACE ONE (1) PAD, REF.-4 ON BOTTOM OF SHIPPING CONTAINER, REF.-1 AND SLEEVES, REF.-5, AROUND SIDES AND
ENDS. THEN PLACE ALL PCKAGED ITEMS IN THE BOX AND FILL VOIDS WITH REF.-6 TO PREVENT MOVEMENT.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .