EDR.pdf
PDF 10 MB Posted
- Attached to
- ICBM Separation Clamp Federal contract opportunity
- Solicitation number
- SPRHA222R0183
- Issued by
- Defense Logistics Agency Aviation
About this file
This federal contract opportunity is a solicitation for an ICBM Separation Clamp. The solicitation number is SPRHA222R0183 and is seeking technical proposals from small businesses only for the ICBM Separation Clamp. The Defense Logistics Agency Aviation is the issuing agency. A technical data package with details on the required clamp is available as an attachment to the solicitation. The opportunity is set aside solely for small businesses.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA222R0183_______0003.pdf | ||
| SPRHA222R0183_______0002.pdf | ||
| SPRHA222R0183_______0001.pdf | ||
| SPRHA222R0183.pdf | ||
| SPI.pdf | ||
| FATR.pdf | ||
| CPP.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF A:
Clamp Kit, Separation – KMU364/E
2. PART NUMBER:
69A48340G4
3. NATIONAL STOCK NUMBER:
1440-00-148-7661
PREPARED BY:
ALAN J LOVELESS
OFFICE SYMBOL:
414 SCMS/GUEA
DATE:
12/8/20
HILL AFB FORM 462 Page 1 of 1
4. A supportability analysis was completed for this kit, which shows that all materials and components are available. See the embedded spreadsheet for details. This information is available to help with the purchasing process, but its use is not mandatory.
Supportability 69A48340G4 12-4-20
5. This EI adds documents S-133-1012-3-2-1, S-133-1012-3-2-2, and S-133-1012-35 since they are not available in JEDMICs and, as a result, are not in the bid package.
S-133-1012-3-2-1.p df
S-133-1012-3-2-2.p df
S-133-1012-35.pdf
6. This EI also includes copies of two Request For Variances (RFVs) that add alternate adhesive Scotchcast 8N and Amorim Cork Composite Inc. as an alternate cork supplier. Engineering Orders (EOs) for both of these changes are in work but will not be ready in time to support this buy.
RFV MSP535148
Adhesive Obsolecen
RFV R6300
Obsolecence Suppli
CUI
CUI Controlled by: DLA Aviation Ogden Controlled By: AUBA
CUI Category: Controlled Tech info Distribution/ Dissemination Control: FEDCON
POC: michelle.mihu@us.af.mil
Sheet1
Part Number Being Evaluated: V-Band Kit (69A48340G4)
Procurable from the OEM
Procurable from a source other than the OEM
Not procurable from anyone - possible project
Procurable from surplus in original packaging
Procurable from AF Supply
Procurable from DLA Supply
Item Number Part No. Vendor Part No. NSN Noun OEM/ CAGE Source/ CAGE Source Contact Information Procurable? Review Date Comments
| 1 | 69D49222G1 | NA | 6150-00-442-7866 | ||
| AF mgt | CABLE ASSY, SP, ELEC, BRANCHED, (W6A) (HRU-873/B) | ? | ? | Many cable mfg available | 7/20/20 |
1.1 68A51749P1005SA 87-577512-05F None CONNECTOR PLUG, ELECTRICAL-BAYONET COUPLING CRIMP SOCKET CONTACTS, SIZE 16 AND 20 GROUNDING TYPE FOR POTTING (MIL-C-38999, SERIES 11A, CLASS P MODIFIED) Amphenol Aerospace / 77820 Any Amphenol distributor Vickie Ball email: vball@amphenol-aao.com, Michael Sassani msassani@amphenol-aao.com 6/5/20 Several in ILS. Amphenol still makes this connector.
1.2 67C55013P1 102821 None CONNECTOR, RECEPTACLE, FLANGE MOUNT - BAYONET COUPLING ITT Corporation None Jennifer Aparicio Phone: 714-628-2098 6/5/20 Called and left messages. 7/3/19, 7/11/19. ITT no longer makes this connector. Needs to be reverse engineered. FY20 project IW. 6/5/20
| 1.3 | MS27487-10-1 | None | 5935-00-233-3442 | |||
| DLA mgt. | KIT, EMP HDW (backshell) | Amphenol Aerospace / 77820 | Powell/6E390 | Sam Evankovich, 909-219-6869, sevankovich@powell.com | 6/5/20 | Several in ILS. Found on Powell's website. |
1.4 69C48543 None None FITTING, SUPPORT - INFLIGHT DISCONNECT NA NA NA NA 12/5/19 Top level drawing. G1 is the top level PL.
1.4.1 69C48543P1 None None FITTING, SUPPORT - INFLIGHT DISCONNECT ? Machine Shop Any machine shop 6/5/20 Part fully defined in 69C48543.
| 1.4.1 | MS21209C0415 | None | 5325-00-631-7894 | |||
| DLA mgt. | Insert, Screw thread, Course and Fine Locking, Helical Coil, Cres - Rev 3 | ? | ILS | See ILS | 6/5/20 | Defined by active spec AIA/NAS NASM21209. Lots available in ILS. |
| 1.5 | NAS1630C1 | None | 5305-00-456-6777 | |||
| DLA mgt. | SCREW, Machined, Pan head, Short Thread, Offset Cruciform - Rev 10 | www.aircraftfast.com | ILS | See ILS | 6/5/20 | Defined by active spec AIA/NAS NAS 1630-1634. Lots available in ILS. |
1.6 67A60221P200 M81044/12-20-0 6145-00-181-9773, DLA managed WIRE, ELECTRICAL, INSULATED, RADIATION RESISTANT, 150 DEGREES C, 600 VOLT TE Connectivity Corp. Raychem Products/ 06090
| Powell/ 6E390 | |||
| Mouser Electronics/ 1JN02 | Powell - Sam Evankovich,(909) 219-6869, sevankovich@powell.com | ||
| Mouser Elec - 800-346-6873, https://www.mouser.com | 2/12/20 | Lots in ILS. Available at Powell and Mouser. |
1.7 67A60276P2219R R3701P2219R =
M27500X22ML1T08
44AM1111-22-9-9 =
| 301054-002 | None | WIRE, ELECTRICAL, INSULATED, RADIATION RESISTANT, 150 DEGREES C, 600 VOLT | TE Connectivity Corp. Raychem Products/ 06090 | TE Connectivity Corp. Raychem Products/ 06090 | Mindy Armstrong (Raychem), (800) 806-0480, msarmstr@te.com |
| Sharon Moran (TE Connect) 800-522-6752,1,2, skmoran@te.com | 2/12/20 | 67A60276XXXXXX is not to be used and is replaced with R3701XXXXXX. There is one source listed in ILS. Sent email to Sharon (TE) to see if they still make this cable. 2/26/20. Sent email and voice mail to Sharon. TE makes this cable. 3/16/2. |
1.8 67A60276P2029R R3701P2029R =
M27500X20ML2T08 =
| 44A1121-20-9/9-9 | 6145-01-032-3693, DLA managed | WIRE, ELECTRICAL, INSULATED, RADIATION RESISTANT, 150 DEGREES C, 600 VOLT | TE Connectivity Corp. Raychem Products/ 06090 | TE Connectivity Corp. Raychem Products/ 06090 | Mindy Armstrong (Raychem), (800) 806-0480, msarmstr@te.com |
| Sharon Moran (TE Connect) 800-522-6752,1,2, skmoran@te.com | 2/12/20 | 67A60276XXXXXX is not to be used and is replaced with R3701XXXXXX. There are lots of sources in ILS when the Raychem PN is used. Sent email to Sharon (TE) to see if they still make this cable. 2/26/20. Sent email and voice mail to Sharon. TE makes this cable. 3/16/2. |
1.9 74A54879P1 PR-1570 Amber COMPOUND, POLYURETHANE, ELECTRONIC PACKAGING PRC - DESOTO INTERNATIONAL, INC
PPG AEROSPACE
ASC-LOS ANGELES,
Kathleen Barcal 661-678-4209 Bergdahl Associates Inc./ 4E208 Tari Grinde, 775-323-7542, tari@bergdaul.com, https://www.bergdahl.com/sealant/sealant-adhesives/pr-1538/ 2/12/20 Courtaulds Areospace replaced Product Research (cage 05027), which is not active. From Google PPG Areospace makes PR-1570. Bergdahl confirmed that PPG was Product Research and that they still make PR-1570 amber.
| 1.9 ALT | R6535P1 | MSP535132P1 | |
| PR-1570 Amber parts A & B | None | COMPOUND, POLYURETHANE, ELECTRONIC PACKAGING | PRC - DESOTO INTERNATIONAL, INC |
PPG AEROSPACE
ASC-LOS ANGELES,
Kathleen Barcal 661-678-4209 Bergdahl Associates Inc./ 4E208 Tari Grinde, 775-323-7542, tari@bergdaul.com, https://www.bergdahl.com/sealant/sealant-adhesives/pr-1538/ 6/5/20 R6535P1 is obsolete. Use MSP535132P1. Courtaulds Areospace replaced Product Research (cage 05027), which is not active. From Google PPG Areospace makes PR-1570. Bergdahl confirmed that PPG was Product Research and that they still make PR-1570 amber.
| 1.11 | R2479P1 | M23053/5-101-9 | 5970-00-787-2312 | |||
| DLA mgt. | INSULATION SLEEVING, ELECTRICAL-POLYOLEFIN, HEAT SHRINKABLE | TE Connectivity Corp. Raychem Products/ 06090 | Mouser Electronics/ 1JN02 | Mouser Elec - 800-346-6873, https://www.mouser.com | 6/5/20 | Lots in ILS. Available at Mouser. |
| 1.11 ALT | R16321P31 | MIL-I-23053/5 or /6 | |||||
| TW-TMS 3/32X1.75-9 | None | MARKER, IDENTIFICATION, HEAT SHRINKABLE SLEEVING | TE Connectivity Corp. Raychem Products/ 06090 | Component Enterprises Co., Co. / 30194 | Tanya Lyons, 610-272-7900, tanyal@componententerprises.com | 6/5/20 | Lots available in ILS. Component Enterprises is one of many that has this material. |
1.12 R2479P4 M23053/5-104-9 5970-00-088-2975
5970-00-082-3942 5970-01-390-0996 DLA mgt. INSULATION SLEEVING, ELECTRICAL-POLYOLEFIN, HEAT SHRINKABLE TE Connectivity Corp. Raychem Products/ 06090 and 3 other OEMS. Mouser Electronics/ 1JN02 Mouser Elec - 800-346-6873, https://www.mouser.com 6/5/20 Lots in ILS. Available at Mouser.
| 1.12 ALT | R16321P33 | MIL-I-23053/5 or /6 | |||||
| TW-TMS 3/16X1.75-9 | None | MARKER, IDENTIFICATION, HEAT SHRINKABLE SLEEVING | TE Connectivity Corp. Raychem Products/ 06090 | Component Enterprises Co., Co. / 30194 | Tanya Lyons, 610-272-7900, tanyal@componententerprises.com | 6/5/20 | Lots available in ILS. Component Enterprises is one of many that has this material. |
| 1.13 | 66A49678P2 | TY1CL2WD2CLRWHT, | |
| TMS-SCE-3/16-2.0-9 | 7510-00-829-1239 | ||
| DLA mgt. | TAPE, VINYL, ADHESIVE BACKED-CABLE MARKER SPECIFICATION CONTROL DRAWING | TE Connectivity Corp. Raychem Products/ 06090 | Powell/ 6E390 |
| Mouser Electronics/ 1JN02 | Powell - Sam Evankovich,(909) 219-6869, sevankovich@powell.com | ||
| Mouser Elec - 800-346-6873, https://www.mouser.com | 2/12/20 | USE VINYL TAPE IAW PPP-T-66 TY1CL2WD2CLRWHT. Lots in ILS. Available from Powell and Mouser. |
| 1.14 | 67A60756P11 | M23053/5-106-0 | 5970-00-815-1295, DLA managed | INSULATION SLEEVING, FLEXIBLE, POLYOLEFIN, HEAT SHRINKABLE | TE Connectivity Corp. Raychem Products/ 06090 | Powell/ 6E390 | |
| Mouser Electronics/ 1JN02 | Powell - Sam Evankovich,(909) 219-6869, sevankovich@powell.com | ||||||
| Mouser Elec - 800-346-6873, https://www.mouser.com | 2/12/20 | Left voice mail and sent email. 2/13/20. EO allows m23053/5-XXX-X to replace the original PNs. Lots in ILS. Available at Powell and Mouser. |
1.16 75A49531TYIII PD208 None SEALER COATING, APPLICATION OF NA NA NA NA 12/5/19 Mixing/ application spec. Not a material.
1.16.1 74A54879P1 Parts A and B PR-1570 Amber None COMPOUND, POLYURETHANE, ELECTRONIC PACKAGING PRC - DESOTO INTERNATIONAL, INC
PPG AEROSPACE
ASC-LOS ANGELES,
Kathleen Barcal 661-678-4209 Bergdahl Associates Inc./ 4E208 Tari Grinde, 775-323-7542, tari@bergdaul.com, https://www.bergdahl.com/sealant/sealant-adhesives/pr-1538/ 2/12/20 Courtaulds Areospace replaced Product Research (cage 05027), which is not active. From Google PPG Areospace makes PR-1570. Bergdahl confirmed that PPG was Product Research and that they still make PR-1570 amber.
1.16.1 128A5500P1 CAB-O-SIL M-5 None FILLERS, COLLOIDAL SILICA Cabot Corporation Phone: 217-253-3370/www.cabotcorp.com 12/5/19 Found on the internet
| 1.19 | R2311P5 | QQW343H22S1A = AA59551H22S1A | 6145-00-160-4775 | |||
| DLA mgt. | WIRE, ELECTRICAL - SOLID, COPPER LEAD ALLOOY COATED, UNINSULATED | ? | ILS | ILS | 6/5/20 | On the PN the last "A" stands for lead alloy coating, which is no longer available. The QQ spec is cancelled and replaced with the AA spec. They look to be identical. I'm going to have to do an EO to add AA59551H22S1T (tin coated) as an alternate. Lots of the AA59551H22S1T wire in ILS. EO generated and into Logan, Pete and Dean. 6/8/20. EO into JIRA. 6/9/20 |
1.2 QQS571 SN60WRQP2 None SOLDER ? ILS ILS 2/12/20 Lots avaiable in ILS
1.21 68C52772 None None INTERCONNECTION LIST NA NA NA NA Parts list. Not a part.
1.21.1 R2164 855
QQB575F36T0062
AA59569F36T0062 None BRAID, WIRE - ROLLED FLAT (TIN COATED COPPER AND NICKEL PLATED) Birnbach Radio Co./ 71002 Wire Master/ 0FVD7 John Thomason, 800-635-5342, jthomason@wiremasters.net 6/26/20 Cage and SAM not active. Nothing in ILS. Got a person's message. It didn't sound like the Birnbach Co. Nothing when goggled. ASAP didn't have anything for the AF or Birnbach PNs. We may need to find a drop in replacement from Raychem. Sent drawing to Sharon at TE to see if they can supply. This cable is defined by QQ-B-575 (cancelled and replaced by A-A-59569) plus any mods in the drawing. There is no braid in the AA spec that is exactly the same as the R2164P3 braid. I sent this drawing to John Thomason (Wire Master) to see if he can get P3, P6, and P7 made. 6/15/20. Called John and left a message. 6/26/20. There are lots of braids available on ILS under the QQ or AA PNs. If Wire Master can't get the wire, I will have to get the SPO to agree to a close sub. 6/26/20. John emailed back and said that Wire Master can get these braids from International Wire Corp. Yea! 6/30/20. Done.
| 1.21.1 | R2479 | M23053/5-101-9 | 5970-00-787-2312 | |||
| DLA mgt. | INSULATION SLEEVING, ELECTRICAL-POLYOLEFIN, HEAT SHRINKABLE | TE Connectivity Corp. Raychem Products/ 06090 | Mouser Electronics/ 1JN02 | Mouser Elec - 800-346-6873, https://www.mouser.com | 6/5/20 | Made in Czech Republic, 2952 ft minimum. Lots in ILS. Available from Mouser. |
| 1.21.1.1 | 67A60756 | M23053/5-110-0 | 5970-00-815-1300 (DLA Mg.) | INSULATION SLEEVING, FLEXIBLE, POLYOLEFIN, HEAT SHRINKABLE | TE Connectivity Corp. Raychem Products/ 06090 | Powell/ 6E390 | |
| Mouser Electronics/ ? | Powell - Sam Evankovich,(909) 219-6869, sevankovich@powell.com | ||||||
| Mouser Elec - 800-346-6873, https://www.mouser.com | 3/18/20 | Left voice mail and sent email. 2/13/20. EO allows m23053/5-XXX-X to replace the original PNs. Lots in ILS. Available at Powell and Mouser. |
1.22 67A60221P229 M81044/12-22-9 6145-00-181-9773, DLA managed WIRE, ELECTRICAL, INSULATED, RADIATION RESISTANT, 150 DEGREES C, 600 VOLT TE Connectivity Corp. Raychem Products/ 06090
| Powell/ 6E390 | |||
| Mouser Electronics/ ? | Powell - Sam Evankovich,(909) 219-6869, sevankovich@powell.com | ||
| Mouser Elec - 800-346-6873, https://www.mouser.com | 2/12/20 | Lots in ILS. Available at Powell and Mouser. |
| 1.23 | 66A49678P3 | TY1CL2WD1CLRWHT, TMS-SCE-3/16-1.0-9 = | |||
| 5273550001 | None | TAPE, VINYL, ADHESIVE BACKED-CABLE MARKER SPECIFICATION CONTROL DRAWING | TE Connectivity Corp. Raychem Products/ 06090 | TE Connectivity Corp. Raychem Products/ 06090 | Mindy Armstrong (Raychem), (800) 806-0480, msarmstr@te.com |
| Sharon Moran (TE Connect) 800-522-6752,1,2, skmoran@te.com | 2/12/20 | USE VINYL TAPE IAW PPP-T-66 TY1CL2WD1CLRWHT. Nothing found in ILS. Set email to Sharon to see if they still make this tape. 2/26/20. Sent email and voice mail to Sharon. TE makes this tape. 3/16/2. |
| 1.24 | 47A101726P5 | MSP535131P3 | |
| PR-420 PARTS "A" AND "B" | None | PRIMERS FOR POLYURETHANE POTTING COMPOUNDS | PRC - DESOTO INTERNATIONAL, INC |
PPG AEROSPACE
ASC-LOS ANGELES,
Kathleen Barcal 661-678-4209 Bergdahl Associates Inc./ 4E208 Tari Grinde, 775-323-7542, tari@bergdaul.com, https://www.bergdahl.com/sealant/ 12/5/19 Several available on ILS or through Bergdahl.
1.24 ALT 47A101726P4 PR-1531 PARTS "A" AND "B" None PRIMERS FOR POLYURETHANE POTTING COMPOUNDS NA NA NA NA 6/8/20 No longer manufactured according to the drawing 47A101726. Teri at Bergdahl has never heard of PR-1531. P5 is still made so we can ignore this alternate.
1.25 R2479P2 M23053/5-102-9 5970-00-740-2972, DLA managed INSULATION SLEEVING, ELECTRICAL-POLYOLEFIN, HEAT SHRINKABLE TE Connectivity Corp. Raychem Products/ 06090 and 3 other OEMS. Mouser Electronics/ 1JN02 Mouser Elec - 800-346-6873, https://www.mouser.com 7/1/19 Made in Czech Republic, 2952 ft minimum. Lots in ILS. Available from Mouser.
2 66E49510G2 NA 1420-01-688-7163 STRAP AND SLIPPER ASSY, CLAMP - IFD ? ? Fabricated part. Any fab shop 7/20/20
2.1 66E49514 NA None STRAP AND FITTING ASSY, SEPERATION CLAMP ? ? Fabricated part. Any fab shop 7/20/20
| 2.1 | 66E49514G5 | NA | 1420-00-420-6625 | ||||
| DLA managed | STRAP AND FITTING ASSY, SEPERATION CLAMP | NA | NA | Parts list only | NA | 7/21/20 | Parts list. Not a part. |
2.1.1 66E49511P5 NA None DETAILS, TENSION STRAP ? ? Fabricated part. Any fab shop 7/20/20 Drawing is hard to read.
2.1.2 66D50663P4 NA None DETAILS, TRUNNION FITTING SEPERATION CLAMP ? ? Machine part. Any machine shop 7/20/20
| 2.1.5 | R2232P36-3 | HL31-6-3 | 5320-00-795-7200 | |
| ? Mgt | FASTNER - PIN AND COLLAR ONE SIDE ASSEMBLING | Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ||
| VOI -SHAN Div. of VSI Corp., cage 92215 | ILS or Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ILS |
Erin Osorio with Hi Shear, 310-784-4262 7/21/20 Plenty in ILS. Hi-Shear is an active company. Left message on Erin Osoria's phone (310-784-4262). 7/23/20.I talked with Kevin Marshall (VP engineering at Hi-Shear, now called Lisi Areospace, 310-784-4258). He said they could probably still make the fastener. He is sending their drawing so I can compare to ours. I also send him a copy of our drawing. 7/23/20. AF dwg compares well with Hi-Shear's dwg. They have more modern material, finish, and heat treat specs. Emailed Kevin and asked if they will make the fasteners for us. 7/24/20. Kevin said that Erin needs to decide if they are willing to make these parts. I emailed Erin to see if they will make these parts. 7/27/20.
VOI is now called Arconic Global Fastners and Rings, Inc. They are active. I talked with Kenneth Paine (kenneth.paine@howmet.com, 805-426-2270). Howmet is the new name for Arconic. He does not show this fastener in their system. I sent him the drawing to see if they have a drop in. It didn't go through for some reason. i need to call him and resend. 7/23/20.
| 2.1.6 | 66A50866P6 | HL86G-6 | 5320-01-041-9727 | |
| DLA Mgt. | COLLAR, SHEAR PIN, CRES | Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ||
| VOI -SHAN Div. of VSI Corp., cage 92215 | ILS or Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ILS |
Erin Osorio with Hi Shear, 310-784-4262 7/27/20 Plenty in ILS. Hi-Shear is an active company. Emailed Erin Osoria (310-784-4262). Also emailed Kevin Marshall (VP engineering at Hi-Shear, now called Lisi Areospace, 310-784-4258) and sent him the drawing. Kevin said that Erin needs to decide if they are willing to make these parts. I emailed Erin to see if they will make these parts. 7/27/20.
2.1.7 66D50662P2 NA None BRACKET, CABLE TENSIONING - SEPERATION CLAMP ? Any machine shop Any machine shop 7/27/20 Simple machine part.
| 2.1.8 | R2232P36-4 | HL31-6-4 | None | FASTNER - PIN AND COLLAR ONE SIDE ASSEMBLING | Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | |
| VOI -SHAN Div. of VSI Corp., cage 92215 | ILS or Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ILS |
Erin Osorio with Hi Shear, 310-784-4262 7/21/20 Plenty in ILS. Hi-Shear is an active company. Left message on Erin Osoria's phone (310-784-4262). 7/23/20.I talked with Kiven Marshall (VP engineering at Hi-Shear, now called Lisi Areospace, 310-784-4258). He said they could probably still make the fastener. He is sending their drawing so I can compare to ours. I also send him a copy of our drawing. 7/23/20. AF dwg compares well with Hi-Shear's dwg. They have more modern material, finish, and heat treat specs. Emailed Kevin and asked if they will make the fasteners for us. 7/24/20.
VOI is now called Arconic Global Fastners and Rings, Inc. They are active. I talked with Kenneth Paine (kenneth.paine@howmet.com, 805-426-2270). Howmet is the new name for Arconic. He does not show this fastener in their system. I sent him the drawing to see if they have a drop in. It didn't go through for some reason. I need to call him and resend. 7/23/20.
| 2.2 | 66D50668G3 | NA | 1420-00-420-2946 | ||||
| DLA Mgt | SLIPPER AND SPACER SEPARATION CLAMP, ASSY OF | NA | NA | NA | NA | 7/27/20 | Parts list. Not a part. |
2.2.1 66E49508P2 NA None DETAILS, SLIPPER-SEPARATION CLAMP ? Any machine shop Any machine shop 7/27/20 Simple machine part.
2.2.2 67B53151P1 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
2.2.2.1 128A5469P3 SE-555
A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 RUBBER, SILICONE, MOLDED AND EXTRUDED General Electric Co., Silicone Products Dept, Waterford, NY. 12188, Cage 01139 Lots in ILS under "A-A-59588-3A50", "9320-00-128-0127 ", and "ZZ-R-765" ILS 10/21/20 EO adds A-A-59588-3A50 as an alternate. Lots in ILS under the A-A or NSN. Nothing on the original GE material. PN ZZ-R-765 came up under the same NSN as A-A-59588-3A50.
2.2.2 Alt 67B53151P2 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
2.2.2.1 Alt A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 Silicone Rubber Sheet ? ILS See ILS 9/2/20 Lot available in ILS.
2.2.3 MSP535150P1 RTV 560 None MATERIAL SPECIFICATION FOR ROOM TEMPERATURE VULCANIZING SILICONE RUBBER General Electric Company Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Red, medium viscosity RTV used as a low to high temp potting or sealant material. Cage 01139 is now Momentive Performance Materials Inc., Tom Stemper, 518-233-3654. Lots in ILS. |
| 2.2.4 | 128A5489P2 | MSP535163P1 | |
| SS4004 | None | PRIMERS FOR SILICONE ADHESIVES | General Electric Company |
Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Pink silicone primer. Lots in ILS. |
| 2.3 | 66D50668G2 | NA | 1420-00-420-2948 | ||||
| DLA mgt | SLIPPER & SPR, SEP CLAMP, ASSY | NA | NA | NA | NA | 7/27/20 | Parts list. Not a part. |
2.3.1 66E49508P1 NA None DETAILS, SLIPPER-SEPARATION CLAMP ? Any machine shop Any machine shop 7/27/20 Simple machine part.
2.3.2 67B53151P1 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
2.3.2.1 128A5469P3 SE-555
A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 RUBBER, SILICONE, MOLDED AND EXTRUDED General Electric Co., Silicone Products Dept, Waterford, NY. 12188, Cage 01139 Lots in ILS under "A-A-59588-3A50", "9320-00-128-0127 ", and "ZZ-R-765" ILS 10/21/20 EO adds A-A-59588-3A50 as an alternate. Lots in ILS under the A-A or NSN. Nothing on the original GE material. PN ZZ-R-765 came up under the same NSN as A-A-59588-3A50.
2.3.2 Alt 67B53151P2 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
2.3.2.1 Alt A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 Silicone Rubber Sheet ? ILS See ILS 9/2/20 Lot available in ILS.
2.3.3 MSP535150P1 RTV 560 None MATERIAL SPECIFICATION FOR ROOM TEMPERATURE VULCANIZING SILICONE RUBBER General Electric Company Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Red, medium viscosity RTV used as a low to high temp potting or sealant material. Cage 01139 is now Momentive Performance Materials Inc., Tom Stemper, 518-233-3654. Lots in ILS. |
| 2.3.4 | 128A5489P2 | MSP535163P1 | |
| SS4004 | None | PRIMERS FOR SILICONE ADHESIVES | General Electric Company |
Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Pink silicone primer. Lots in ILS. |
| 2.4 | 66D50661P4 | NA | 5342-00-236-4456 | |
| DLA mgt | DETAILS, RETAINER, SLIPPER SEPERATION CLAMP | ? | ILS | |
| Any fab shop | ILS | |||
| Any fab shop | 7/27/20 | Simple fab part. Several in ILS. |
| 2.5 | 67D53250G1 | NA | 1420-00-461-8531 | ||||
| DLA mgt | LINK ASSY, THERMAL COVER - LOWER | NA | NA | NA | NA | 7/27/20 | Parts list. Not a part. |
2.5.1 67D53250P1 NA None LINK ASSY, THERMAL COVER - LOWER ? Any machine shop Any machine shop 7/27/20 Simple machine part.
| 2.5.3 | MS21209C0815 | NA | 5325-00-815-4929 | |||
| DLA mgt | Insert | ? | ILS | ILS | 7/27/20 | Lots in ILS |
2.5.4 118A1664 NA None DRAWING TERMS AND TOLERANCES - INTERPRETATION OF NA NA NA NA 7/27/20 Not a part.
2.5.5 118A1526 NA None IDENTIFICATION MARKING NA NA NA NA 7/27/20 Not a part.
| 2.6 | 67D53250G2 | NA | 1420-00-435-1282 | ||||
| DLA mgt | LINK ASSY, THERMAL COVER - LOWER | NA | NA | NA | NA | 7/27/20 | Parts list. Not a part. |
2.6.2 67D53250P2 NA None LINK ASSY, THERMAL COVER - LOWER ? Any machine shop Any machine shop 7/27/20 Simple machine part.
| 2.6.3 | MS21209C0815 | NA | 5325-00-815-4929 | |||
| DLA mgt | Insert | ? | ILS | ILS | 7/27/20 | Lots in ILS |
2.6.4 118A1664 NA None DRAWING TERMS AND TOLERANCES - INTERPRETATION OF NA NA NA NA 7/27/20 Not a part.
2.6.5 118A1526 NA None IDENTIFICATION MARKING NA NA NA NA 7/27/20 Not a part.
| 2.7 | 67C53208P1 | NA | 5305-00-455-3333 | |
| DLA mgt | SCREW, THERMALCOVER | ? | ILS | |
| Any machine shop | IL | |||
| SAny machine shop | 7/28/20 | Several in ILS. Simple machine part. |
| 2.8 | 67C53207P1 | NA | 5340-00-457-7193 | |||
| DLA mgt | CLIP, RETAINER - TRUNNION | ? | Any fab shop | Any fab shop | 7/28/20 | Simple fab part. None in ILS. |
| 2.11 | 66D50661P5 | NA | 5342-00-457-7256 | |
| DLA mgt | DETAILS, RETAINER, SLIPPER SEPERATION CLAMP | ? | ILS | |
| Any fab shop | ILS | |||
| Any fab shop | 7/28/20 | Simple fab part. Several in ILS. |
| 2.12 | 66D50668G4 | NA | 1420-00-420-2947 | ||||
| DLA mgt | SLIPPER AND SPCR SEP CLAMP, ASSY OF | NA | NA | NA | NA | 7/28/20 | Parts list. Not a part. |
2.12.1 66E49508P3 NA None DETAILS, SLIPPER-SEPARATION CLAMP ? Any machine shop Any machine shop 7/28/20 Simple machine part.
2.12.2 67B53151P1 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
2.12.2.1 128A5469P3 SE-555
A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 RUBBER, SILICONE, MOLDED AND EXTRUDED General Electric Co., Silicone Products Dept, Waterford, NY. 12188, Cage 01139 Lots in ILS under "A-A-59588-3A50", "9320-00-128-0127 ", and "ZZ-R-765" ILS 10/21/20 EO adds A-A-59588-3A50 as an alternate. Lots in ILS under the A-A or NSN. Nothing on the original GE material. PN ZZ-R-765 came up under the same NSN as A-A-59588-3A50.
2.12.2 Alt 67B53151P2 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
2.12.2.1 Alt A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 Silicone Rubber Sheet ? ILS See ILS 9/2/20 Lot available in ILS.
2.12.3 MSP535150P1 RTV 560 None MATERIAL SPECIFICATION FOR ROOM TEMPERATURE VULCANIZING SILICONE RUBBER General Electric Company Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Red, medium viscosity RTV used as a low to high temp potting or sealant material. Cage 01139 is now Momentive Performance Materials Inc., Tom Stemper, 518-233-3654. Lots in ILS. |
| 2.12.4 | 128A5489P2 | MSP535163P1 | |
| SS4004 | None | PRIMERS FOR SILICONE ADHESIVES | General Electric Company |
Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Pink silicone primer. Lots in ILS. |
2.13 67A59765 NA None MASS PROPERTIES MEASUREMENT ASSURACY SPECIFICATION NA NA NA NA 7/28/20 Process spec, not a part.
| 3 | 66E49515G2 | NA | 1420-01-688-7167 | ||||
| AF mgt | STRAP AND SLIPPER ASSY, CLAMP | NA | NA | NA | NA | 7/28/20 | Parts list. Not a part. |
| 3.1 | 66E49514G4 | NA | 1420-00-420-6624 | ||||
| DLA mgt | STRAP AND FITTING ASSEMBLY- SEP CLAMP | NA | NA | NA | NA | 7/28/20 | Parts list. Not a part. |
3.1.1 66E49511P4 NA None DETAILS, TENSION STRAP ? ? Fabricated part. Any fab shop 7/28/20 Drawing is hard to read.
3.1.2 66D50663P5 NA None DETAILS, TRUNNION FITTING SEPERATION CLAMP ? ? Machine part. Any machine shop 7/28/20
| 3.1.3 | 66A50887P0603 | 66A50887P6-3 | |
| HS61-6-3 | 5320-00-593-3174 | ||
| DLA mgt. | PIN-100 COUNTERSUNK HEAD, 125, 000 PSI SHEAR MINIMUM | Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | |
| ILS | |||
| Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ILS |
Erin Osorio with Hi Shear, 310-784-4262 7/28/20 Lots in ILS
| 3.1.4 | 66A50888P6 | HS60M-6 | 5320-00-579-7819 | |
| DLA mgt | COLLAR, RIVET PIN, MONEL SPECIFICATION CONTROL DRAWING | Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ||
| ILS | ||||
| Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ILS |
Erin Osorio with Hi Shear, 310-784-4262 7/28/20 Lots in ILS
| 3.1.5 | R2232P36-3 | HL31-6-3 | 5320-00-795-7200 | |
| ? mgt | FASTNER - PIN AND COLLAR ONE SIDE ASSEMBLING | Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ||
| VOI -SHAN Div. of VSI Corp., cage 92215 | ILS or Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ILS |
Erin Osorio with Hi Shear, 310-784-4262 7/21/20 Plenty in ILS. Hi-Shear is an active company. Left message on Erin Osoria's phone (310-784-4262). 7/23/20.I talked with Kevin Marshall (VP engineering at Hi-Shear, now called Lisi Areospace, 310-784-4258). He said they could probably still make the fastener. He is sending their drawing so I can compare to ours. I also send him a copy of our drawing. 7/23/20. AF dwg compares well with Hi-Shear's dwg. They have more modern material, finish, and heat treat specs. Emailed Kevin and asked if they will make the fasteners for us. 7/24/20. Kevin said that Erin needs to decide if they are willing to make these parts. I emailed Erin to see if they will make these parts. 7/27/20.
VOI is now called Arconic Global Fastners and Rings, Inc. They are active. I talked with Kenneth Paine (kenneth.paine@howmet.com, 805-426-2270). Howmet is the new name for Arconic. He does not show this fastener in their system. I sent him the drawing to see if they have a drop in. It didn't go through for some reason. i need to call him and resend. 7/23/20.
| 3.1.6 | 66A50866P6 | HL86G-6 | 5320-01-041-9727 | |
| DLA Mgt. | COLLAR, SHEAR PIN, CRES | Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ||
| VOI -SHAN Div. of VSI Corp., cage 92215 | ILS or Hi-Shear Corp., 2600 Skypark Dr., Torrance, Ca 90509, Cage 73197 | ILS |
Erin Osorio with Hi Shear, 310-784-4262 7/27/20 Plenty in ILS. Hi-Shear is an active company. Emailed Erin Osoria (310-784-4262). Also emailed Kevin Marshall (VP engineering at Hi-Shear, now called Lisi Areospace, 310-784-4258) and sent him the drawing. Kevin said that Erin needs to decide if they are willing to make these parts. I emailed Erin to see if they will make these parts. 7/27/20.
| 3.2 | 66D50668G2 | NA | 1420-00-420-2948 | ||||
| DLA mgt | SLIPPER AND SPACER SEPARATION CLAMP, ASSY OF | NA | NA | NA | NA | 7/28/20 | Parts list. Not a part. |
3.2.1 66E49508P1 NA None DETAILS, SLIPPER-SEPARATION CLAMP ? Any machine shop Any machine shop 7/27/20 Simple machine part.
3.2.2 67B53151P1 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
3.2.2.1 128A5469P3 SE-555
A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 RUBBER, SILICONE, MOLDED AND EXTRUDED General Electric Co., Silicone Products Dept, Waterford, NY. 12188, Cage 01139 Lots in ILS under "A-A-59588-3A50", "9320-00-128-0127 ", and "ZZ-R-765" ILS 10/21/20 EO adds A-A-59588-3A50 as an alternate. Lots in ILS under the A-A or NSN. Nothing on the original GE material. PN ZZ-R-765 came up under the same NSN as A-A-59588-3A50.
3.2.2 Alt 67B53151P2 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
3.2.2.1 Alt A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 Silicone Rubber Sheet ? ILS See ILS 9/2/20 Lot available in ILS.
3.2.2 ALT 67B53151P2 NA None SPACER,SLIPPER-SEPARATION CLAMP ? Any rubber mfg. shop Any rubber mfg. shop 7/28/20 Simple silicone rubber part.
3.2.3 MSP535150P1 RTV 560 None MATERIAL SPECIFICATION FOR ROOM TEMPERATURE VULCANIZING SILICONE RUBBER General Electric Company Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Red, medium viscosity RTV used as a low to high temp potting or sealant material. Cage 01139 is now Momentive Performance Materials Inc., Tom Stemper, 518-233-3654. Lots in ILS. |
| 3.2.4 | 128A5489P2 | MSP535163P1 | |
| SS4004 | None | PRIMERS FOR SILICONE ADHESIVES | General Electric Company |
Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Pink silicone primer. Lots in ILS. |
| 3.3 | 66D50661P4 | NA | 5342-00-236-4456 | |
| DLA mgt | DETAILS, RETAINER, SLIPPER SEPERATION CLAMP | ? | ILS | |
| Any fab shop | ILS | |||
| Any fab shop | 7/27/20 | Simple fab part. Several in ILS. |
3.7 67A59765 NA None MASS PROPERTIES MEASUREMENT ASSURACY SPECIFICATION NA NA NA NA 7/28/20 Process spec, not a part.
| 4 | 66E49513G1 | NA | 1420-00-435-1270 | ||||
| AF mgt | COVER ASSY, SEPARATION-THERMAL | NA | NA | NA | NA | 7/28/20 | Parts list. Not a part. |
4.1 66E49513P1 NA None COVER ASSY, SEPARATION-THERMAL ? Fabricated part Fabricated part 7/28/20
4.2 66E49512P1 NA None DETAILS, COVER ASSY SEPARATION CLAMP ? Fabricated part Fabricated part 7/28/20
4.3 66C49465G1 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD NA NA NA NA 7/28/20 Parts list. Not a part.
4.3.1 66C49465P1 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD ? Fabricated part Fabricated part 7/28/20
4.3.3 66C49464P1 NA None TERMINAL,WIRE ROPE-HEAT SHIELD ? Any machine shop Any machine shop 7/28/20 Simple machine part.
4.3.4 118A1664 NA None DRAWING TERMS AND TOLERANCES - INTERPRETATION OF NA NA NA NA 7/27/20 Not a part.
4.3.5 118A1526 NA None IDENTIFICATION MARKING NA NA NA NA 7/27/20 Not a part.
4.3.6 66C49465P6 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD ? Fabricated part Fabricated part 7/28/20
| 4.5 | 66C49467P2 | NA | 5310-01-610-7708 | |
| DLA mgt | DETAILS,FITTING,BALL-SEPARATION CLAMP HEAT SHIELD | Richards Sheet Metal Works, Inc., Cage 3S409 | Richards Sheet Metal Works, Inc., Cage 3S409 or any machine shop | ILS |
Jason Dickamre, 810-436-1425, Richards Any machine shop 7/28/20 52 on ILS. Simple machine part.
4.6 65A5683 MSP535148P1
Scotchcast #8 (XR-5236) superceeds 65A5683 per EO.
| Alternate is Scotchcast #8N | None | ADHESIVE, EPOXY POLAMIDE | 3M/ 76381, Alissa Hall, Tech support, 800-676-8381, ahall@mmm.com | ILS |
| 3M/ 76381 | ILS | |||
| Cheryl Lundeen, 3M, 866-556-5712 | 12/1/20 | Lots of Sotchcast 8 in ILS. Probably is Scotchcast 8N since 3M does not make Scotchcast 8 anymore. Called Alissa Hall (3M Tech support, 800-245-3573 opt2, ahall@mmm.com) and she sent the 8 and 8N data sheet for comparison. The data is exactly the same. The data sheets look too close. Dry labbed? Sent email to Alissa asking why the data is the same. I created an EO to MSP535148 to add 69A48340 to the list of NHAs to use 8N. I asked Logan to make this high priority since we will be buying V-Bands soon. 12/1/20. The following are 3M stock #s for different quantity sizes of 8N: |
80611616915 8N SCOTCHCAST RESIN 16 LB KIT
80611616923 8N SCOTCHCAST RESIN 1 LB. UNITS
80611616931 8N SCOTCHCAST RESIN PART A 40 LBS/PAIL
80611616949 8N SCOTCHCAST RESIN PART B 40 LBS/PAIL
80611616956 8N SCOTCHCAST RESIN PART B 55 GALLON/DRUM (400 LBS)
| 4.7 | 65A5684P1 | 23039063P1 | ||||
| 106798 (4-Nitrophenol) | 6810-00-234-2013 | |||||
| DLA mgt. | FUNGICIDE, PHENOL CLASS | EMD Chemicals Inc. 480S. Democrat Rd, Gibbstown, NJ 08027 / cage 0AL61 | EMD Chemicals Inc. 480S. / cage 0AL61 | Kathy Lodge, 856-599-6632 | 7/29/20 | 65A5684P1 is superceeded by 23039063P1 for new design and procurement. Possibly some in ILS. |
4.8 67A61392P1 - BMS-8-103 (Boeing)
- 65A5685 (GE)
- TRA-BOND 2188 (TRA-Con) 1420-00-763-3654 DLA mgt Trowelable Cork Boeing Co. / 07NZ1 GE Co. Re-Entry Systems Dept TRA-CON Inc. ILS ILS 7/29/20 Available on ILS under NSN and BMS8-103. In my searching, verified that the ground cork is avaiable.
| 4.16 | 67C60380P1 | NA | 1420-00-575-8890 | |
| DLA mgt | Fitting, Ball-Separation Clamp-Heat Shield | ? | ILS | |
| Any machine shop | ILS | |||
| Any machine shop | 7/28/20 | Simple machine part. Two sources on ILS. |
| 4 ALT | 66E49513G3 | NA | 1420-00-004-5433 | ||||
| AF mgt | COVER ASSY, SEPARATION-THERMAL | NA | NA | NA | NA | 7/28/20 | Parts list. Not a part. |
4.2 ALT 66E49512P1 NA None DETAILS, COVER ASSY SEPARATION CLAMP ? Fabricated part Fabricated part 7/28/20
4.3 ALT 66C49465G1 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD NA NA NA NA 7/28/20 Parts list. Not a part.
4.3.1A 66C49465P1 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD ? Fabricated part Fabricated part 7/28/20
4.3.3A 66C49464P1 NA None TERMINAL,WIRE ROPE-HEAT SHIELD ? Any machine shop Any machine shop 7/28/20 Simple machine part.
4.3.4A 118A1664 NA None DRAWING TERMS AND TOLERANCES - INTERPRETATION OF NA NA NA NA 7/27/20 Not a part.
4.3.5A 118A1526 NA None IDENTIFICATION MARKING NA NA NA NA 7/27/20 Not a part.
4.3.6A 66C49465P6 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD ? Fabricated part Fabricated part 7/28/20
| 4.5 ALT | 66C49467P2 | NA | 5310-01-610-7708 | |
| DLA mgt | DETAILS,FITTING,BALL-SEPARATION CLAMP HEAT SHIELD | Richards Sheet Metal Works, Inc., Cage 3S409 | Richards Sheet Metal Works, Inc., Cage 3S409 or any machine shop | ILS |
Jason Dickamre, 810-436-1425, Richards Any machine shop 7/28/20 52 on ILS. Simple machine part.
4.6 ALT 65A5683 MSP535148P1
Scotchcast #8 (XR-5236) superceeds 65A5683 per EO.
| Alternate is Scotchcast #8N | None | ADHESIVE, EPOXY POLAMIDE | 3M/ 76381, Alissa Hall, Tech support, 800-676-8381, ahall@mmm.com | ILS |
| 3M/ 76381 | ILS | |||
| Cheryl Lundeen, 3M, 866-556-5712 | 12/1/20 | Lots of Sotchcast 8 in ILS. Probably is Scotchcast 8N since 3M does not make Scotchcast 8 anymore. Called Alissa Hall (3M Tech support, 800-245-3573 opt2, ahall@mmm.com) and she sent the 8 and 8N data sheet for comparison. The data is exactly the same. The data sheets look too close. Dry labbed? Sent email to Alissa asking why the data is the same. I created an EO to MSP535148 to add 69A48340 to the list of NHAs to use 8N. I asked Logan to make this high priority since we will be buying V-Bands soon. 12/1/20. The following are 3M stock #s for different quantity sizes of 8N: |
80611616915 8N SCOTCHCAST RESIN 16 LB KIT
80611616923 8N SCOTCHCAST RESIN 1 LB. UNITS
80611616931 8N SCOTCHCAST RESIN PART A 40 LBS/PAIL
80611616949 8N SCOTCHCAST RESIN PART B 40 LBS/PAIL
80611616956 8N SCOTCHCAST RESIN PART B 55 GALLON/DRUM (400 LBS)
| 4.7 ALT | 65A5684P1 | 23039063P1 | ||||
| 106798 (4-Nitrophenol) | 6810-00-234-2013 | |||||
| DLA mgt. | FUNGICIDE, PHENOL CLASS | EMD Chemicals Inc. 480S. Democrat Rd, Gibbstown, NJ 08027 / cage 0AL61 | EMD Chemicals Inc. 480S. / cage 0AL61 | Kathy Lodge, 856-599-6632 | 7/29/20 | 65A5684P1 is superceeded by 23039063P1 for new design and procurement. Possibly some in ILS. |
4.8 ALT 67A61392P1 - BMS-8-103 (Boeing)
- 65A5685 (GE)
- TRA-BOND 2188 (TRA-Con) 1420-00-763-3654 DLA mgt Trowelable Cork Boeing Co. / 07NZ1 GE Co. Re-Entry Systems Dept TRA-CON Inc. ILS ILS 7/29/20 Available on ILS under NSN and BMS8-103. In my searching, verified that the ground cork is avaiable.
| 4.16 ALT | 67C60380P1 | NA | 1420-00-575-8890 | |
| DLA mgt | Fitting, Ball-Separation Clamp-Heat Shield | ? | ILS | |
| Any machine shop | ILS | |||
| Any machine shop | 7/28/20 | Simple machine part. Two sources on ILS. |
4.18 ALT 66E49513P18 NA None COVER ASSY, SEPARATION-THERMAL ? Fabricated part Fabricated part 7/28/20
| 5 | 66E49513G2 | NA | 1420-01-688-7168 | ||||
| AF mgt | COVER ASSY, SEPARATION-THERMAL | NA | NA | NA | NA | 7/28/20 | Parts list. Not a part. |
5.2 66E49512P2 NA None DETAILS, COVER ASSY SEPARATION CLAMP ? Fabricated part Fabricated part 7/30/20
5.3 66C49465G2 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD NA NA NA NA 7/28/20 Parts list. Not a part.
5.3.2 66C49465P2 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD ? Fabricated part Fabricated part 7/28/20
5.3.3 66C49464P1 NA None TERMINAL,WIRE ROPE-HEAT SHIELD ? Any machine shop Any machine shop 7/28/20 Simple machine part.
5.3.4 118A1664 NA None DRAWING TERMS AND TOLERANCES - INTERPRETATION OF NA NA NA NA 7/27/20 Not a part.
5.3.5 118A1526 NA None IDENTIFICATION MARKING NA NA NA NA 7/27/20 Not a part.
5.3.6 66C49465P6 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD ? Fabricated part Fabricated part 7/28/20
| 5.5 | 66C49467P2 | NA | 5310-01-610-7708 | |
| DLA mgt | DETAILS,FITTING,BALL-SEPARATION CLAMP HEAT SHIELD | Richards Sheet Metal Works, Inc., Cage 3S409 | Richards Sheet Metal Works, Inc., Cage 3S409 or any machine shop | ILS |
Jason Dickamre, 810-436-1425, Richards Any machine shop 7/28/20 52 on ILS. Simple machine part.
5.6 65A5683 MSP535148P1
Scotchcast #8 (XR-5236) superceeds 65A5683 per EO.
| Alternate is Scotchcast #8N | None | ADHESIVE, EPOXY POLAMIDE | 3M/ 76381, Alissa Hall, Tech support, 800-676-8381, ahall@mmm.com | ILS |
| 3M/ 76381 | ILS | |||
| Cheryl Lundeen, 3M, 866-556-5712 | 12/1/20 | Lots of Sotchcast 8 in ILS. Probably is Scotchcast 8N since 3M does not make Scotchcast 8 anymore. Called Alissa Hall (3M Tech support, 800-245-3573 opt2, ahall@mmm.com) and she sent the 8 and 8N data sheet for comparison. The data is exactly the same. The data sheets look too close. Dry labbed? Sent email to Alissa asking why the data is the same. I created an EO to MSP535148 to add 69A48340 to the list of NHAs to use 8N. I asked Logan to make this high priority since we will be buying V-Bands soon. 12/1/20. The following are 3M stock #s for different quantity sizes of 8N: |
80611616915 8N SCOTCHCAST RESIN 16 LB KIT
80611616923 8N SCOTCHCAST RESIN 1 LB. UNITS
80611616931 8N SCOTCHCAST RESIN PART A 40 LBS/PAIL
80611616949 8N SCOTCHCAST RESIN PART B 40 LBS/PAIL
80611616956 8N SCOTCHCAST RESIN PART B 55 GALLON/DRUM (400 LBS)
| 5.7 | 65A5684P1 | 23039063P1 | ||||
| 106798 (4-Nitrophenol) | 6810-00-234-2013 | |||||
| DLA mgt. | FUNGICIDE, PHENOL CLASS | EMD Chemicals Inc. 480S. Democrat Rd, Gibbstown, NJ 08027 / cage 0AL61 | EMD Chemicals Inc. 480S. / cage 0AL61 | Kathy Lodge, 856-599-6632 | 7/29/20 | 65A5684P1 is superceeded by 23039063P1 for new design and procurement. Possibly some in ILS. |
5.8 67A61392P1 - BMS-8-103 (Boeing)
- 65A5685 (GE)
- TRA-BOND 2188 (TRA-Con) 1420-00-763-3654 DLA mgt Trowelable Cork Boeing Co. / 07NZ1 GE Co. Re-Entry Systems Dept TRA-CON Inc. ILS ILS 7/29/20 Available on ILS under NSN and BMS8-103. In my searching, verified that the ground cork is avaiable.
5.10 66E49513P10 NA None COVER ASSY, SEPARATION-THERMAL ? Fabricated part Fabricated part 7/28/20
5.13 66E49513P13 NA None COVER ASSY, SEPARATION-THERMAL ? Fabricated part Fabricated part 7/28/20
5.14 66E49513P14 NA None COVER ASSY, SEPARATION-THERMAL ? Fabricated part Fabricated part 7/28/20
5.15 66E49512P3 NA None DETAILS, COVER ASSY SEPARATION CLAMP ? Fabricated part Fabricated part 7/28/20
| 5.16 | 67C60380P1 | NA | 1420-00-575-8890 | |
| DLA mgt | Fitting, Ball-Separation Clamp-Heat Shield | ? | ILS | |
| Any machine shop | ILS | |||
| Any machine shop | 7/28/20 | Simple machine part. Two sources on ILS. |
| 5 ALT | 66E49513G4 | NA | 1420-00-435-1271 | ||||
| AF mgt | COVER ASSY, SEPARATION-THERMAL | NA | NA | NA | NA | 7/28/20 | Parts list. Not a part. |
5.2ALT 66E49512P2 NA None DETAILS, COVER ASSY SEPARATION CLAMP ? Fabricated part Fabricated part 7/30/20
5.3ALT 66C49465G2 NA None WIRE ROPE ASSEMBLY,HEAT SHIELD NA NA NA NA 7/28/20 Parts list. Not a part.
| 5.5ALT | 66C49467P2 | NA | 5310-01-610-7708 | |
| DLA mgt | DETAILS,FITTING,BALL-SEPARATION CLAMP HEAT SHIELD | Richards Sheet Metal Works, Inc., Cage 3S409 | Richards Sheet Metal Works, Inc., Cage 3S409 or any machine shop | ILS |
Jason Dickamre, 810-436-1425, Richards Any machine shop 7/28/20 52 on ILS. Simple machine part.
5.6ALT 65A5683 MSP535148P1
Scotchcast #8 (XR-5236) superceeds 65A5683 per EO.
| Alternate is Scotchcast #8N | None | ADHESIVE, EPOXY POLAMIDE | 3M/ 76381, Alissa Hall, Tech support, 800-676-8381, ahall@mmm.com | ILS |
| 3M/ 76381 | ILS | |||
| Cheryl Lundeen, 3M, 866-556-5712 | 12/1/20 | Lots of Sotchcast 8 in ILS. Probably is Scotchcast 8N since 3M does not make Scotchcast 8 anymore. Called Alissa Hall (3M Tech support, 800-245-3573 opt2, ahall@mmm.com) and she sent the 8 and 8N data sheet for comparison. The data is exactly the same. The data sheets look too close. Dry labbed? Sent email to Alissa asking why the data is the same. I created an EO to MSP535148 to add 69A48340 to the list of NHAs to use 8N. I asked Logan to make this high priority since we will be buying V-Bands soon. 12/1/20. The following are 3M stock #s for different quantity sizes of 8N: |
80611616915 8N SCOTCHCAST RESIN 16 LB KIT
80611616923 8N SCOTCHCAST RESIN 1 LB. UNITS
80611616931 8N SCOTCHCAST RESIN PART A 40 LBS/PAIL
80611616949 8N SCOTCHCAST RESIN PART B 40 LBS/PAIL
80611616956 8N SCOTCHCAST RESIN PART B 55 GALLON/DRUM (400 LBS)
| 5.7ALT | 65A5684P1 | 23039063P1 | ||||
| 106798 (4-Nitrophenol) | 6810-00-234-2013 | |||||
| DLA mgt. | FUNGICIDE, PHENOL CLASS | EMD Chemicals Inc. 480S. Democrat Rd, Gibbstown, NJ 08027 / cage 0AL61 | EMD Chemicals Inc. 480S. / cage 0AL61 | Kathy Lodge, 856-599-6632 | 7/29/20 | 65A5684P1 is superceeded by 23039063P1 for new design and procurement. Possibly some in ILS. |
5.8ALT 67A61392P1 - BMS-8-103 (Boeing)
- 65A5685 (GE)
- TRA-BOND 2188 (TRA-Con) 1420-00-763-3654 DLA mgt Trowelable Cork Boeing Co. / 07NZ1 GE Co. Re-Entry Systems Dept TRA-CON Inc. ILS ILS 7/29/20 Available on ILS under NSN and BMS8-103. In my searching, verified that the ground cork is avaiable.
5.15ALT 66E49512P3 NA None DETAILS, COVER ASSY SEPARATION CLAMP ? Fabricated part Fabricated part 7/28/20
| 5.16ALT | 67C60380P1 | NA | 1420-00-575-8890 | |
| DLA mgt | Fitting, Ball-Separation Clamp-Heat Shield | ? | ILS | |
| Any machine shop | ILS | |||
| Any machine shop | 7/28/20 | Simple machine part. Two sources on ILS. |
5.19ALT 66E49513P19 NA None COVER ASSY, SEPARATION-THERMAL ? Fabricated part Fabricated part 7/28/20
5.20ALT 66E49513P20 NA None COVER ASSY, SEPARATION-THERMAL ? Fabricated part Fabricated part 7/28/20
5.21ALT 66E49513P21 NA None COVER ASSY, SEPARATION-THERMAL ? Fabricated part Fabricated part 7/28/20
| 6 | 66D50668G1 | NA | 1420-00-420-2945 | ||||
| DLA mgt | SLIPPER AND SPACER SEPARATION CLAMP, ASSY OF | NA | NA | NA | NA | 8/7/20 | Parts list. Not a part. |
6.1 66D50665G1 NA None SLIPPER ASSY, SEPERATION CLAMP NA NA NA NA 8/7/20 Parts list. Not a part.
6.1.1 66D50665P1 NA None SLIPPER ASSY, SEPERATION CLAMP ? Any machine shop Any machine shop 8/7/20 Simple machine part. None in ILS.
6.1.2 MS21209C0815 NA 5325-00-815-4929 Insert ? ILS See ILS 8/7/20 Defined by active spec AIA/NAS NASM21209. Lots available in ILS.
6.1.5 165A4447P1 165A4447P1 None DRY FILM LUBRICANT, MOLYBDENUM DISULFIDE Dow Corning Corp., 50 Commerce Dr., Trumbull, CT 06611, Cage 94499 None None 8/7/20 None in ILS. Source controlled. P1 is no longer made per the drawing and P2 is listed as an alternate.
6.1.5 ALT 165A4447P2 165A4447P2, Dow Corning 321 Dry Film Lubricant Spray. None DRY FILM LUBRICANT, MOLYBDENUM DISULFIDE Dow Corning Corp., 50 Commerce Dr., Trumbull, CT 06611, Cage 94499, 800-258-2436 Chempoint, Cage 3CU95 Kaku Ansah, 425-372-9501, kaku.ansah@chempoint.com 9/2/20 None in ILS. Source controlled. Dupont merged with Dow then separated April 2019 and Dupont (833-338-7668, Kim) took the Molykote products and may still make this stuff. Dupont Consumer Solutions (800-248-2481) confirmed that Dupont now has the Molykote 321 line. Kim at Dupont is getting me data sheets on the 321 product. 8/7/20. Kim refered me to Robin Gray (robin.gray@dupont.com). Robin sent the data sheet and the safety sheet. There is not many requirements to compare. It does look like the same stuff. Kaku said that it is the same stuff as the old stuff we used to buy for what it is worth. I'm going to say that the current day 321 is good to go. 9/2/20
6.1.6 165A4448 NA None MOLYKOTE 321, APPLICATION OF NA NA NA NA 9/2/20 Process spec, not a part.
6.2 67B53151P1 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
6.2.1 128A5469P3 SE-555
A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 RUBBER, SILICONE, MOLDED AND EXTRUDED General Electric Co., Silicone Products Dept, Waterford, NY. 12188, Cage 01139 Lots in ILS under "A-A-59588-3A50", "9320-00-128-0127 ", and "ZZ-R-765" ILS 10/21/20 EO adds A-A-59588-3A50 as an alternate. Lots in ILS under the A-A or NSN. Nothing on the original GE material. PN ZZ-R-765 came up under the same NSN as A-A-59588-3A50.
6.2 ALT 67B53151P2 None None SPACER,SLIPPER-SEPARATION CLAMP ? Fabricated part Rubber fabricated part 9/2/20 Nothing in ILS. Looks like a simple part fabricated from silicone rubber sheets
6.2.1 ALT A-A-59588-3A50 ZZ-R-765 9320-00-128-0127 Silicone Rubber Sheet ? ILS See ILS 9/2/20 Lot available in ILS.
6.3 MSP535150P1 RTV 560 None MATERIAL SPECIFICATION FOR ROOM TEMPERATURE VULCANIZING SILICONE RUBBER General Electric Company Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Red, medium viscosity RTV used as a low to high temp potting or sealant material. Cage 01139 is now Momentive Performance Materials Inc., Tom Stemper, 518-233-3654. Lots in ILS. |
| 6.4 | 128A5489P2 | MSP535163P1 | |
| SS4004 | None | PRIMERS FOR SILICONE ADHESIVES | General Electric Company |
Silicone Products Dept.
Waterford, NY 12188
| Cage 01139 | ILS or | ||
| Momentive Performance Materials Inc, Cage 01139 | ILS or | ||
| Tom Stemper at Momentive, 518-233-3654, WWW.MOMENTIVE.CO | 7/27/20 | Pink silicone primer. Lots in ILS. |
7 66E49518G1 NA 1420-01-688-7169, AF managed RM ASSEMBLY, SEPARATION CLAMP NA NA NA NA 10/22/20 Parts list. Not a part.
7.0 70A18069P1 463-4-4, Base Matl X-301, Catalyst TL-52A, Thinner None PRIMER EPOXY HIGH TEMPERTURE Finch Paint and Chemical Co., Torrance, California None that I can find None NA 10/22/20 Found in the main drawing and not the PL. Qualified to Boeing Material Spec, BMS 10-53. No sign of them in Cage. From Google, the Finch company seems to be tied to Emhart Corp, which is now owened by Balck and Decker. Also, some indications that Desmond Bros Paint Co. might be Finche's parent company. Nothing in ILS. This material is only needed for G2 not G1, so we don't need it. Yea!
7.0 TT-P-1757, tp II, Class C, Color Y Many Zinc Chromate Primer ? ILS has lots ILS 10/22/20 Found in the main drawing and not the PL. Applies only to Item 17.
7.1 66E49518P1 GE R6300P1, CL B, .085+-.005 Thk Armstrong - Insulcork
| Crown - 4740 | None | Cork | - Armstrong Cork Co., Defense Divison, LA, Ca or Lancaster, PA | |
| - Crown Cork and Seal, Mundet Cork Division, North Bergen, N. J. | Amorim Cork Composite, Inc., 26112 110th St., Trevor, Wi, cage 05192 | |||
| Matt Peaslee, 262-869-9004, Amorim PN is P50. | 12/4/20 | Cork qualified to Boeing spec BMS 8-70, Type I. Nothing in ILS under any of the PNs. No NSNs under any of the PNs. Talked to Kieth Brown (215-322-3527) at Crown and he did think they made cork anymore. He said to call back if Armstrong is a bust. Armstrong is now known as Armstrong World Industries (717-397-0611 & 888-276-7876) and they do not make cork at any of their divisions anymore. We are going to have to find another source of synthetic resin bonded sheet cork. Left a message with Amorim Cork Composite, Inc (Matt Peaslee, 262-869-9004) since they have an active cage (05192). 10/23/20. I believe he called me and said they could make this cork, but I'm not sure. I called him and left another message to call me. I sent Matt copies of R6300 and 66E49518. 11/30/20. Matt sent me the datasheet which lines up well with R6300 and 65A5682P1. I put in an EO to add 56A5682 to 66E49518, which adds Amorium as an option. 12/4/20. Matt sent an email that shows that all the supppliers called out in the cork specs are now owned by Amorium. 12/7/20. |
7.2 66E49518P2 NA None Cover ? Any Machine Shop Any machine shop 10/22/20 2024-T4 Aluminum per QQ-A-250/14. Replaced by SAE AMS-QQ-A-250 per the cancellation notice and the notice paragraph on page 1 of the AMS spec. No EO required. 10/23/20.
| 7.3 | MS21209C0815 | NA | 5325-00-815-4929 | |||
| DLA mgt | Insert, Screw Thread | ? | ILS | ILS | 7/27/20 | Lots in ILS |
7.6 65A5683P1 MSP535148P1
Scotchcast #8 (XR-5236) superceeds 65A5683 per EO.
| Alternate is Scotchcast #8N | None | ADHESIVE, EPOXY POLAMIDE | 3M/ 76381, Alissa Hall, Tech support, 800-676-8381, ahall@mmm.com | ILS |
| 3M/ 76381 | ILS |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .