SPI.pdf
PDF 2 MB Posted
- Attached to
- Solicitation Federal contract opportunity
- Solicitation number
- SPRHA422R0007
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains packaging instructions and specifications for a vertical stabilizer. The packaging must meet requirements of MIL-STD-2073 for military packaging and ISPM 15 for wood packaging material in international trade. All bearings must be cleaned, preserved with Code 11 preservative, and wrapped in barrier material or equivalent. The wood components including pallets and containers must be constructed from debarked wood and heat treated to 56 degrees Celsius for 30 minutes. Marking is required by an accredited agency recognized by the American Lumber Standards Committee.
The related federal contract opportunity is a solicitation from the Defense Logistics Agency Aviation seeking offers for a vertical stabilizer. No further details are provided on response date, award date, pricing terms, or set-asides.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA4-22-R-0007-0003.pdf | ||
| SPRHA4-22-R-0007-0001.pdf | ||
| SPRHA4-22-R-0007-0002.pdf | ||
| EDL.pdf | ||
| EDR.pdf | ||
| SQS.pdf | ||
| CDRLtest.pdf | ||
| SPRHA422R0007.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES
EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.
NOTES
1. REMOVE THE SHIPPING CONTAINER SIDE WHERE THE INNER CONTAINER IS POSITIONED. THIS CAN BE DETERMINED BY CHECKING THROUGH ONE OF THE INSPECTION WINDOWS ON THE END PANELS. LAG BOLTS ARE REMOVED FROM SIDE, ENDS, TOP AND BOTTOM ON THE SIDE BEING REMOVED, REF.-61 AND REF.-62. REMOVE CONTAINER TOP. REMOVE BOLTS, REF.-33, -34, & -61 ON THE SIDE THAT HAS BEEN REMOVED. REMOVE MOUNTING BOLTS, REF.-46. REMOVE THE SAME SIDE FRONT AND REAR VERTICAL SUPPORTS, REF.-22, -24. REMOVE INNER CARTON, REF.-54. RAISE THE LEADING EDGE OF STABILIZER HIGH ENOUGH TO SECURE SLING ADAPTER, DWG. NO. 5FWFE-MA 8098. REMOVE LEADING EDGE.
2. ALL OPENINGS WILL BE CAPPED, PLUGGED, OR WRAPPED IAW: AIA/NAS NASM 5501/31 AND 32.
3. CLEAN AND PRESERVE ALL BEARINGS AS REQUIRED BY A SUITABLE METHOD IN MIL-STD-2073, USE CODE 11 PRESERVATIVE ON ALL BEARINGS. WRAP ALL PRESERVED PARTS WITH MIL-PRF-121 GRADE A, BARRIER OR EQUIVALENT.
SECURE IN PLACE WITH A SUITABLE TAPE.
4. REF.-53 MACERATED PAPER PADS ARE STAPLED ON THE SIDES OF VERTICAL SUPPORTS WHERE THE STABILIZER
CONTACTS THE SUPPORTS.
5. END CLEATS, REF.-14, -15, ARE MADE OF 2 X 4 (NOM) MATERIAL AS SHOWN IN DETAIL-L.
6. REF.-6, -7 SIDE POSITIONING BOARDS ARE NAILED TO RUBS WHERE SHOWN ON DETAIL-I AND ARE 3 1/2 INCHES
DOWN FROM THE TOP OF THE FLOORING.
7. USE REF.-46, -47, -48 TO BOLT VERTICAL STABILIZER TO STEEL ANGLE, REF.-28. PLACE A PIECE OF POLY SHEET, REF.
52, BETWEEN STABILIZER AND SADDLE WITH BRACKET TO INSURE THERE IS NO CONTACT OF THE STABILIZER WITH
THE WOOD OR METAL BRACKET.
8. SECURE REINFORCER, REF.-43 THE SAME AS CLEATS PER ASTM-D6256 REQUIREMENTS.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .