EDR.pdf
PDF 61 KB Posted
- Attached to
- Solicitation Federal contract opportunity
- Solicitation number
- SPRHA422R0007
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of a Vertical Stabilizer Structure Assembly (F-16). Key specifications include part number 16T9100-409 and national stock number 1560-01-525-6124WF. Manufacturers must comply with the listed military specifications and standards in lieu of the data indicated. Unique identification labeling is required per MIL-STD-130 including a minimum 1/8 inch human readable label and 1/4 inch square machine readable 2D matrix label containing cage code, part number, and serial number. The related federal contract opportunity is solicitation number SPRHA422R0007 for the Vertical Stabilizer issued by the Defense Logistics Agency Aviation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA4-22-R-0007-0003.pdf | ||
| SPRHA4-22-R-0007-0001.pdf | ||
| SPRHA4-22-R-0007-0002.pdf | ||
| SPI.pdf | ||
| SQS.pdf | ||
| EDL.pdf | ||
| CDRLtest.pdf | ||
| SPRHA422R0007.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
VERTICAL STABILIZER STRUCTURE ASSY (F-16)
2. PART NUMBER:
16T9100-409
3. NATIONAL STOCK NUMBER:
1560-01-525-6124WF
PREPARED BY:
DON WILLMOTH
OFFICE SYMBOL:
AFMC/GUEAA
DATE:
1 MAY 2017
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY OO-ALC COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. MARK PER MIL-STD-130 IN LIEU OF FPS-3008.
8. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA 16T9100-409 FOR MANUFACTURE.
9. MASTER TOOLING IS REQUIRED TO MAKE THIS PART. THE GOVERNMENT DOES NOT HAVE ACCESS TO THIS MASTER TOOLING. ANY MANUFACTURERS WHO WISH TO OBTAIN THIS TOOLING MUST CONTACT LOCKHEED MARTIN CO.
10. ALL MATE WITH HOLES ARE TO BE LEFT UNDRILLED, TAG PART WITH NOTE "PARTS TO BE DRILLED UPON
INSTALLATION".
11. 16PR100 IS NOT REQUIRED FOR MANUFACTURE AND WILL NOT BE FURNISHED.
12. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. Minimum 1/8th inch on Human readable to include:
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
B. Minimum 1/4 inch square on Machine Readable 2D Matrix construct 2 to include
1. CAGE (17V)
2. P/N (1P)
3. Serial Number (1S)
C. Label shall contain all data on existing label, if existing label is to be replaced.
D. Same Label Material shall be used as specified in drawing for existing label.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418
File details come from the government source that posted it. Updated .